Most of the saw and pulp industries have stored wood nearby their production, the main reason is to have a continuous wood flow to the production. Wet storage of wood is of great importance to keep the wood quality. Without water sprinkling the risk of drying outand decomposition through biological activity increases significantly and will result in a negative effect on future production and quality. One drawback of wet storage of wood is the leaching of chemical substances into the surrounding recipient. The log yard run-off contains phosphorus, nitrogen, phenols and organic substances. These substances can cause problems for the surrounding environment. The main objective of this project is to gain an understanding of the wet storage used by the Swedish wood industry and estimate the environmental consequences that run-off water will have on the recipient.

At SIA TallOil's pellets factory in Latvia wood shavings and saw dust are dried with flue gases from a gas burner. TallOil wants to replace the gas with a biofuel that is available at the pellet plant. The reason for this is the unstable gas market in Europe in combination with the fact that TallOil wants to improve its profile as supplier of renewable bio fuels. In this project the technical and economical possibilities for a fuel conversion to ether bark powder, wood shavings or wood powder have been investigated. These fuels should be burned in one of the following applications: TPS BioSwirl, VTS Multifuel burner or Saxlunds bio fuel combustion plant Due to the fact that the fuel alternatives available are relatively common except for bark powder, the work has mainly been focused on bark powder.

Thinning is one of the most important silvicultural activities in middle aged forests, partly to minimize damages and partly because it leads to earlier harvesting revenues and increases the value of the remaining trees. There are many different indices used to describe stand density and thereby the need of thinning in forests today. Studies have shown that forest variables can be estimated with high accuracy using airborne laser scanning and it is likely that the method could also be used to estimate forest density indices. In this study, the possibility of using the forest density index ?H² to determine and map priorities for thinning operations for a forest area was examined.

The purpose with this study is to find out how much dead wood we can expect us to find in a Russian reference river and compare with studies from Swedish streams. Dead wood are an important structure for the biodiversity in forest streams, studies have shown that population of trout can increase with up to 300 % when the amount of dead wood are increasing from 0 to 8 ? 16 LWD (Large woody debris)/100 m2. Dead wood are also an important structure for the stream character, formations of dams and pools which are important habitats and reproduction areas for salmon and brown trout. The study where taken place in tributaries to the Russian river Varzuga in the North West part of Russia outside Murmansk. Varzuga has low impact of human activity and is considered to be a reference river to rivers in northern Sweden.

The need of raw material does of course fluctuate but the long term view is an increasing demand due to the growing consumption of sawn timber products, pulp, paper and lately also biomass. This has led to a keener competition for wood. At the same time there is an ongoing structural change of a significant part in the Swedish wood supply market, the private forest owners. In 1992, 22 % of Sweden´s 335 000 private forest owner lived apart from their forest. In 2007 this figure had risen to 36 %.

Urban density is not new, but rather one side of the continous processes of change underway in the city. During the urbanizing boom of the industrialization, when the cities grew bigger, the first spaces to be built on were vacant and planted areas in the interior of the district. The gardens that once were there were replaced by yardhouses. The idea of urban density is that a dense city means less distance between residential areas and workplaces, resulting in fewer shipments and travelers, which ultimately leads to lower energy consumption and lower emissions. Urban density may lead to shorter distances, but not necessarily. In the wake of urban density the greenstructures of the city is shattered. The possibilities for green areas to contribute to the health of the city and its inhabitants is dramatically reduced.

During the twenty-first century the price of forest land in Sweden has increased heavily. Buying forest land has become more common and the stakeholders have grown in number. The countries around Sweden have through the globalization become connected in the market of round wood and wood products. The price of forest land and round wood are also close connected. The goal with this report is to make a comparison of forest land prices between Sweden, Denmark, Norway, Finland, Estonia and Latvia and to see how the prices have developed in the period 2000-2011. The prime factor in the comparison, except the direct price difference between the countries, is the round wood prices. The round wood prices give information about the economic situation in the countries and play an important role in the return on the forest land. The prices of forest land shifts heavily between the countries.

Fuel pellets are a refined bio fuel mostly consisting of residues from sawmills and wood industry. At Rindi Västerdala AB's combined bio energy plant in Vansbro fuel pellets are produced, while the waste heat from the process is used for district heating. The pellets are produced from sawdust, wood shavings and dry wood chips that is dried, milled and pressed into small cylindrical rods. The advantage of refining the wood material in this manner is that the energy value is greater per unit volume and unit weight, thereby the cost of transportation per energy unit is reduced. Also, less storage space is needed.Pellet manufacturing is a complex process since many parameters affects the final results.

Approximately 4000-5000 hectares, of SCA´s forest land area in Västerbotten, are in need of pre-commercial thinning (PCT) every year. Within the management district, the areas annually treated with PCT must increase, in order to decrease the area with an urgent need for PCT. This can be done by employing more forest workers or entrepreneurs, by mechanized PCT or by an extended season for PCT. Positive experiences from a private forest owner, who started to carry out PCT when the first snow came and then continued for several months, gave an idea to investigate the possibilities to prolong the season of PCT. The purpose of this experiment was to compare PCT carried out when there was snow on the ground with PCT performed when there was no snow on the ground.

Storage of biomass is often associated with problems such as heat development, dry matter losses and reduction of fuel quality. The rise in temperature can potentially cause a risk of self-ignition in the fuel storage. Moreover, emissions from storage piles can cause health problems in the surrounding. The dry matter losses and reduction of fuel quality can have economical effects. The aim of this thesis project is to develop guidelines on how to store large amount of biomass at Vattenfalls heat and power plants in an optimal way.

Old hollow trees of oak contain a large amount of wood mould. Unfortunately, these trees have in the last century been greatly reduced in numbers. It has resulted in that species that depend on these habitats, saproxylic species, have become at risk to decrease in numbers or die out regionally. Previous studies have shown that the volume of wood mould is an important factor for occurrence and population size of saproxylic organisms. The aim of the present study was to examine how the volume of wood mould varies among ash (Fraxinus excelsior), lime (Tilia sp.), maple (Acer platanoides), aspen (Populus tremula) and oak (Quercus robur).

Old hollow trees of oak contain a large amount of wood mould. Unfortunately, these trees have in the last century been greatly reduced in numbers. It has resulted in that species that depend on these habitats, saproxylic species, have become at risk to decrease in numbers or die out regionally. Previous studies have shown that the volume of wood mould is an important factor for occurrence and population size of saproxylic organisms. The aim of the present study was to examine how the volume of wood mould varies among ash (Fraxinus excelsior), lime (Tilia sp.), maple (Acer platanoides), aspen (Populus tremula) and oak (Quercus robur).

This report is a bachelor's thesis of two students from the Energy and Environment degree at KTH Stockholm. Grinda is an island situated Stockholm archipelago. Skärgårdsstiftelsen is landowners and manages the area. Grinda Wärdshus, a guest house located in the island, currently uses an oil-fired boiler as a heating system. The aim of this thesis is to investigate whether wood chips or pellets is, from a sustainability standpoint, a suitable heating method for the guest house.

The main goal with this thesis report was to come up with ideas of how to make the use of energy more effective and thus save money for the company.First a survey was made to find out where and how the energy consumers were divided within the company. The results were then used in calculations to find out how much money that could be saved and how long it would take to get back the investments.There is a big potential in saving money by recovering heat from the UV-lamps with a heat exchanger. It would also even out the pressure in the factory which is a source to heat loss and a cause for discomfort amongst the employees. It?s possible to save 105 000 kr in a year and the money needed for the investments is 600 000 kr.By using the recovery air more effectively the company could save up to 250 000 kr a year in lowered heat purchases, but this would require the use of automatic dampers.If you reschedule the running times for the wood chipper and invest in some kind of load management, for example Sydkraft?s ?Energidirigent? you can save at least 42 000 kr.

Wood has always been an important material for people, and it is used for many applications. As for example, fuel for cooking and heating houses, construction materials and for constructing means of transport. Since wood also is a material that with time biologically degrades due to activity by micro organisms and wood fungi it is important to find ways to protect and further lengthen the life span of the material when in service. One method is to decrease the amount of water in the material by impregnation with an hydrophobic oil. The Linotech method which uses only pure linseed oil is one such possible method. The aim of this study was to investigate the possibility to at the same time impregnate and stain/colour wood samples of pine and spruce by using the Linotech method.