The Pitted ware dwelling site Ajvide on the west coast of Gotland in the Baltic Sea is, because of its long continuity from the late Mesolithic to the middle of the Scandinavian Bronze Age, an interesting research object concerning Stone Age in the Baltic area. In this essay, a comparison between two activity areas on Ajvide have been carried out in the purpose of finding out what these areas may have been used for during the middle Neolithic.  It has been showed, through zooarchaeological analyses of animal bones, that the areas most likely are depositing sites for slaughters refuse and food debris. If it is a result of everyday or more ceremonial activities is left undetermined..

Holmen Skog AB is an important supplier of conifer pulpwood to the Iggesund Paperboard mill. After logging and transport to the landing by a forwarder, the wood is loaded on trucks for further transport, often by using separate loaders. During this handling process considerable amounts of stone material is sometimes mixed into the pulpwood and this causes problems for the industry. The aim of this study is to identify which part of the chain from forest to pulpmill, that contributes the most to this contamination. Sizes and total volumes of the contaminating stones were also investigated.

Competition of spruce fiber raw materials has increased dramatically in the last few years, leading to the fact that transportation costs in the current situation represents a much larger share of the total raw material cost. The Holmen-owned pulp industry Hallsta Paper Mill's location on the coast also constitutes a problem, because of the lack of raw material, which is much larger there, than for a pulp mill located in the hinterland. For a coastal industry it?s therefore natural to import much of the raw material by boat or to buy it from the timber terminals, in order to maintain good profitability. The purpose of this study was to analyze how the size of Hallsta Paper Mill timber supply area, without competition, with competition and with terminal use, affects the company ?s transport costs.

Piles of deadwood are often retained in forests after management to support the biodiversity ofsaproxylic organisms which depend on deadwood to survive. Any knowledge about the crucial role ofpiles as suitable habitat of saproxylic organisms compared to single distributed deadwood objects thatare around the piles would help conservation actors to motivate more forest owners to supportsaproxylic organisms during their management. Therefore to give facts to this the saproxylic fauna ofdifferent pile positions (up and low) was studied and compared to distributed deadwood samplesaround each pile. Our study was focused on saproxylic beetles. Some other parameters such asdiameter, deadwood volume, pile volume and decay stage were assessed to define any effect.

Many wood living insects are considered threatened by modern forestry due to the reduction in amount of dead wood. During the last decade various methods have been used to enhance the quantity of dead wood in managed forests. However little is known how and if these methods are aiding saproxylic insects. The threatened tenebrionid beetle, Upis ceramboides, is already extinct in southern Sweden. It develops in white rotted dead birch (Betula spp) and requires sun-exposed sites.

The background for my thesis is the fact that with rising electricity and oil prices it becomes interesting to calculate on alternative heating systems. I have chosen to calculate upon my parents? farm, which today heats the dwelling house with wood. This is very time-consuming work, time which could be spent on other work. The main objective for this study is to compare three different heating systems to decide how they differ considering effort and cost. The result from the calculations was that grain-heating system demanded the least amount of work, but the total cost was a little higher compared to chips heating. Chips heating required half as much work as today?s wood heating and had a little lower total costs compared with the corn heating. Which system to choose largely depends on how the own work is valued.

This bachelor thesis contains the findings of an investigation into the laying of wedge sawn wood flooring. The advantage of wedge sawn wood flooring is the usage of more material from each board reducing waste. The boards follow the natural profile of the tree where the root part of the board is wider, and the top part is narrower. The technique involves placing boards side by side with adjacent boards in opposite directions. The thick base of one board is neighbored by the narrow top of another, this creates a pattern of wedges in alternating directions, known as a ?root and top? system. Existing literature into this type of flooring is sparce.

This thesis engages the topic of test methods for wood adhesives. Two test methods were evaluated, EN 302-1, a European standard, and ASTM D905, an American standard. The total amount of specimens manufactured and tested was more than 500. The adhesive bonds were tested in shear with an increasing load on the specimen until failure.The adhesives used were epoxy-resin, phenol-resorcinol-formaldehyde and a 2-K polyurethane. The test programme included five different types of intentional errors per method, in order to investigate the sensitivity of the test methods.

Tomo Hugglink (TOMO Skog) is an innovation for harvest and transport of biofuels. The system consists of a truck, a chipping unit and crane mounted on a link and a wood chip trailer. The system works in such a way that the chipping unit is disconnected and placed on the site and wood chips are loaded directly into the wood chip trailer.The aim of this study was:- To examine the performance of the TOMO Hugglink system under different conditions such as the size, placement and quality of the pile.- To calculate the cost per raw ton for two vehicle combinations at different transport distances and to examine the effect of a reduction in set-up time and an increase in load weight.- To identify possible improvements with the TOMO Hugglink system.A time study was conducted within the thesis work to make it possible to determine production and time consumption. In the subsequent economic analysis the cost per tone at different transport distances was calculated for two different lorry concepts. Furthermore the effect of a reduction in set-up time and an increase in load weight was calculated.Under current conditions the utilization of the chipper is low and only 29 % of the total system time is occupied by chipping.

Fuel pellets are in Sweden mainly produced from sawdust and cutter shavings. Before the pelletising process the raw material is dried to attain consistent moisture content and ground up in a hammer mill. In the densification process (pelletising) the ground material is forced through holes in a rotating die. This heats up the wood particles which cause them to soften and self bond. After the process the pellets are cooled, sieved and bagged. The milling process creates a wide range of particle sizes.

In this work I have tried to reconstruct the forest history within Särna-Idre forest common in northern Dalarna from the 19th century until present time. The Särna-Idre region has been an extensively used landscape for a long time. Pollen which indicates grazing has been found in samples orginating from the 10th century. Early travellers from the 18th and 19th centuries seem to have been passing trough a "used" landscape. Burned forests on naked ground are described as common. Also large areas are mentioned as undisturbed with lots of large trees, snags and dead wood.

Syftet med denna uppsats är att analysera mansbilden av karaktären Edward i filmen Edward Scissorhands (Tim Burton, 1990). Genom attstudera hans personlighet och egenskaper ur olika perspektiv, som kan uppfattas som både manligt och kvinnligt, har jag försökt att ta reda på vem denna utstickande karaktär är.Med hjälp av genusteorier och jämförelser av tidigare filmatiseringar som Ed Wood (Tim Burton, 1994), Sleepy Hollow (Tim Burton, 1999) och The cabinet of Dr. Caligari (Robert Weine, 1920) har jag även kunnat fördjupa mig i mansbilden av Edward. Jag har dessutom fokuserat kring Tim Burtons säregna filmskapande, men också kring stjärnskapet hos Johnny Depp, skådespelaren som Burton ofta samarbetar med.Edward Scissorhands har visat sig vara en man med både manliga och kvinnliga attribut, vilket gör honom till en icke stereotypisk man som saknar hjältemod och en muskulös kropp. Trots det så tyder inget på att han är mindre man bara för att han har mer eller mindre egenskaper som generellt uppfattas som manliga.

In three areas in the province of Småland studies has been done to investigate how big damage the moose may do to P. abies. An inquiry examination and two different types of surveys were done to find out how big area, which volume and which financial consequences the moose debarking has had on the forest. When the volume was calculated the rot spreading was included. The area that was damaged was stipulated with the answers from the inquiry examination. 59 % of the asked forest owners answered the inquiry.

Lack of dead wood is the main cause of decaying or loss of populations for many forest species. To increase the amount of dead wood is a prerequisite to maintain biodiversity in forests of northern Europe. In summer 2006 the recreation area Klåveröd, at Söderåsen in Skåne, Sweden, has been inventoried for high stumps (snags) of beech, (Fagus sylvatica). The result of the inventory has been compared with data of the real estate and forest management directories from the owner, region Skåne. The results have also been matched with the results from an inventory of saproxylic beetles in 2005, performed with windowtraps on selected snags both in the area and the adjacent national park Söderåsen. 594 snags were found on 747 ha.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Konservatorprogrammet15 hpInstitutionen för kulturvårdGöteborgs universitet2012:29.