The main goal with this thesis report was to come up with ideas of how to make the use of energy more effective and thus save money for the company.First a survey was made to find out where and how the energy consumers were divided within the company. The results were then used in calculations to find out how much money that could be saved and how long it would take to get back the investments.There is a big potential in saving money by recovering heat from the UV-lamps with a heat exchanger. It would also even out the pressure in the factory which is a source to heat loss and a cause for discomfort amongst the employees. It?s possible to save 105 000 kr in a year and the money needed for the investments is 600 000 kr.By using the recovery air more effectively the company could save up to 250 000 kr a year in lowered heat purchases, but this would require the use of automatic dampers.If you reschedule the running times for the wood chipper and invest in some kind of load management, for example Sydkraft?s ?Energidirigent? you can save at least 42 000 kr.

The efficiency of the harvesters work is more often reviewed, than the work of the forwarders. In a local Stora Enso office the differences between the harvesters reported volume of timber, and the actual volume delivered to the industry had been noticed. Therefore, the decision was made to do a review on the forwarders work. The review was conducted together with a worker from Vmf Qbera, who is working daily with wood measurement, in order to get a valid evaluation of the logs. Eight sites were included in the survey, and on each site 50 logs were marked. Approximately one third of the marked logs were pulpwood, and the remaining logs marked were timber.

The Sitting while waiting for sustainability project goal was to make a functional model for a resting chair and to make it by using furniture and artefacts as material. A try of understanding the process of re-design and to use it to design was driving the project through. The result was a prototype made out of a bed frame and 18 pair of jeans and with details made out of leather..

The last century, forest fires have decreased in frequency due to efficient fire-suppression along with the growth of the industrial forestry. Since 1990, fire has been reintroduced under controlled forms to recreate burnt habitats. Many species that are dependent on, or benefits from, forest fires have increased since fire was reintroduced. The importance of connectivity is often addressed in ecological research. This is particularly important for species dependent on short-lived habitats such as burnt forests.

Our purpose in this paper is to examine if there is any profitability for a company with a factory in the timber industry to invest in a combined heat and power, CHP. Based on analysis and the results that the paper generates, we will give Derome AB a suggestion on how it is a profitable investment or not to installing in a CHP.By investing in a CHP plant, you can get a high efficiency, which means that companies can use their resources more effectively. The Swedish wood industry has by-products of production that can be used for combustion in their boiler which is an advantage.The essay is a qualitative study where we have a case company, Derome AB. In this company, we interviewed two employees who have knowledge in the study. They have helped us to provide information and data about their business.We chose to use the pay-off- and the net present value method, NPV, to see if there are profitable advantages for the investment.

The aim of this study was to develop a simple model for calculating stock costs for bio fuel at Billerud Karlsborg and subsequently recommending a suitable stock level of bio fuel. The stock components considered in the model are GROT (branches and tops), bark, dry wood chips, raw wood chips from barking and sawdust. The calculations are based on a probability distribution of historical deviations between ordered and delivered volumes. The model presents two different ways to manage the supply in case of irregular deliveries. The first way is to stock enough volume to cover the deviations and the second way is to compensate with a quick purchase from the spot market (at extra high purchase prices).

The tribo system ice-curling stone was investigated in order to understand the mechanisms behind the stones' behavior on the ice sheet. The problem with non-identical stones should also be addressed.The stone curls, that is, its sliding path deviates from a straight line to the right for a clock-wise rotation and to the left for a anti-clock-wise rotation. Several mechanisms to explain this behavior have been proposed over the years but none has been successful.By carrying out experiments at the local curling rink and studying silicon castings of ice- and stone-surfaces with scanning electron microscopy and vertical scanning interferometry, it has been decided that the curl is not due to dry friction, ice-debris or the difference in friction on the left and right side of the stone. The side force comes from the fact that the friction is higher at the back of the stone than at the front.The contact between stone and ice is never completely dry, nor in the hydrodynamic lubrication regime. It is probably a combination of hydrodynamic lubrication and a contribution from mechanical scratching of the ice.

This study was conducted on behalf of SCA forest AB, Västerbottens forest administration. Timber procurement from non-industrial private forest owners has become an increasingly important part of SCA:s wood supply. The objectives of this study was to report the current forest conditions in the private forests in the county of Västerbotten, analyse the potential for procurement of wood from private forest owners, and provide a basis for decisions on future strategies for timber procurement from private owners.Material and data have been collected from different sources, mainly from Swedish National Forest Inventory and SKA-VB08. This material was the basis for the analysis and calculations performed with the Heureka application PlanWise. This study area was divided into six different analytical areas (Coastal south, Coastal middle, Lycksele, Inland south, Inland north, Skellefteå), where each area of analysis is represented by a number of municipalities.In this study, two scenarios were specified; one describing the current forest management with current harvesting levels and the effects of these assumptions, the second to illuminate what potential there is for future timber harvesting.

The driving forces from the forest owners point-of-view was studied on a market where several buyers attend to procure round-wood. It was concluded that forest owners prefer personal contacts to other means of communication, but that it is essential that the initial contact is a personal letter on paper. Furthermore, although price is always important, long standing relations is asked for. The buying companies need skillful experienced buyers that can provide more than just quick closures of deals..

This is a study of the insect community associated to the wood-decaying fungus Inonotus radiatus found on Alnus glutinosa trees growing in riparian forests at the northern and southern shores of boreal lakes in the province Uppland. Little is known about this particular bracket fungus and its inhabitants. Insects were reared out at the laboratory from samples of fruiting bodies of the fungus taken at five lakes. During the fieldwork in 2009, data about several environmental variables was also taken. After the rearing period, these variables and their effects over the insects were analyzed.

Projekt Wood Westerbotten är ett samverkansprojekt initierat av Exportrådet. Syftet är att öka försäljningen av ämnen och komponenter för trävaruproducerande företag i norra Sverige. Tyngdpunkten har dock hittills varit Västerbotten där projektet startade. Produktområdena är bygg, trappor, fönster, dörrar, kök och möbler. Stommen i projektet är att hitta kunder på en exportmarknad, framförallt England, Tyskland och Benelux-länderna.

This report is a thesis for collegeengineering program in structuralengineering at Uppsala University andwas commissioned by the Swedishcontractor Svevia. The study aims toprovide an overview of the mostbeneficial bridge material from bothenvironmental and economic point ofview.The life-cycle analysis covers onlycarbon dioxide emissions, since it isthe most spoken of in today?s climateagenda. Furthermore, this study aims tohighlight which parts, of the systemboundary, that contributes to greatercarbon emissions for the wood- and theconcrete bridge.The life-cycle cost analysis wascalculated with a lifespan of 40 yearsand covers the basic cost of investment,operating and maintenance, anddecommissioning costs.The analyzed constructions in this studyare existing projects that are almostcompleted. Both bridges were designed tohandle loads up to 60 tons.

With higher prices for oil and increased focus on fossil fuels impact on the environment the heating sector are searching for alternative fuels. Pellets are a quite new product whose production has risen exponential in recent years. Today there are small-, medium-and large-scale users, where the large-scale consumers are the heating sector. The heating sector is mainly using oil to cover the increased demand during cold periods. The purpose of this study is to analyze the potential of pellets if it would replace thermal power plants oil and coal. The study will also analyze the economic impact a conversion would mean for a heating plant and if the pellet is a reasonable substitute. 2008 statistics from the Swedish district heating association were analyzed and a calculation was performed to determine how many tons of pellets is needed to replace coal and oil.

Previous studies of central tire inflation (CTI) in truck transport of roundwood have shown potential benefits to include more even wood flow and reduced road damage. The greatest benefits are found to be during periods of low bearing capacity such as spring thaw. No previous studies have examined geographical variations in the potential benefit of CTI-equipped trucks. The aim of the study was to develop and use a simple method for geographically prioritizing the use of CTI-equipped trucks within a forest company´s sector of activity.The host company for the study was Holmen Skog. The area studied consisted of Holmen Skog?s entire sector of activity extending from the province of Västerbotten to the province of Småland.

Syftet med denna uppsats är att analysera mansbilden av karaktären Edward i filmen Edward Scissorhands (Tim Burton, 1990). Genom attstudera hans personlighet och egenskaper ur olika perspektiv, som kan uppfattas som både manligt och kvinnligt, har jag försökt att ta reda på vem denna utstickande karaktär är.Med hjälp av genusteorier och jämförelser av tidigare filmatiseringar som Ed Wood (Tim Burton, 1994), Sleepy Hollow (Tim Burton, 1999) och The cabinet of Dr. Caligari (Robert Weine, 1920) har jag även kunnat fördjupa mig i mansbilden av Edward. Jag har dessutom fokuserat kring Tim Burtons säregna filmskapande, men också kring stjärnskapet hos Johnny Depp, skådespelaren som Burton ofta samarbetar med.Edward Scissorhands har visat sig vara en man med både manliga och kvinnliga attribut, vilket gör honom till en icke stereotypisk man som saknar hjältemod och en muskulös kropp. Trots det så tyder inget på att han är mindre man bara för att han har mer eller mindre egenskaper som generellt uppfattas som manliga.