Italy is the third largest market in Europe with a population of almost 58 million. The country is the tenth most important market for Swedish sales. Italy has a fairly good economy at the moment and the forecast tells of an increasing strength during coming years. Despite all of this, Sweden is exporting a fairly small amount of wood to Italy. Only around 2,3 % of all Sweden?s wood export goes to Italy.

This graduation paper is based on my interest for wood and its different tonal quality?s.After some time of thinking I decided to write my paper on the tonal difference between two of the most common woods in guitars, East Indian Rosewood and European Maple. I had built two identical guitars before my graduation paper in which the difference was the wood the back and sides were made of. One was being made of East Indian Rosewood and the other being made of European Maple.I chose to speak with a number of people with different angle of approach to the two kinds of wood and its tonal difference and quality?s.

This thesis deals with different methods for measuring moisture-related dimensional changes ofwood. Typically relative humidity is measured to determine if the ambient climate around anobject is harmful to it or not. Values between 40 to 65% RH are recommended for hygroscopicmaterials. To know how a wooden object actually reacts to changes in the surroundingenvironment requires methods that involve the object itself. Because of the wood anisotropy,differences in wood structure, finishes and other restraints, it is not always possible to predict themovements.This paper addresses various measurement methods, primarily methods that have been testedin the field of conservation, with examples of their use.

Since the 1980s, companies have taken a larger interest in quality and it´s economic impact within the company. Having the knowledge that it´s not quality that costs money, but it´s rather the lack of quality. The work immerses itself in the field of cost of poor quality and the development of key performance indicators.The thesis is performed at Bufab Holding in Värnamo. Bufab Holding is a trading company which mainly buys and sells C-parts. C-parts include fasteners, other small metal-, rubber- or plastic parts such as wires, springs and electronic fasteners.The aim of this thesis was to make a survey of the cost of poor quality and to find key performance indicators (KPI) for cost of poor quality that can be continuously monitored.

I want to look at the possibilities to start selling hot water from a small district heating plant with bioenergy. My reason for doing this project is to look at a new business opportunity for our farm. Our company have less work during the winter time compared to the spring and this project will give us more work during the winter. I also want to take as much material as possible for heating from our farm in order to increase the value of the products from the farm. The project is in a village near us, where we should support a school, a churh, a home for the aged, a kindergarten and a parish hall with heat. In my work I have compared two different alternatives with each other. The first alternative is to put a central heater in one of the buildings, the home for the aged, in which we will burn oat.

Purpose ? The purpose of this thesis is to develop a total cost model for container transports and create a tool that calculates a suitable transport quantity from an economic view, which fulfills the demands on delivery service. To achieve this purpose the following questions will be answered:Which costs are affected by the decision between the two transport alternatives LCL and FCL?   How does the decision of sending product LCL or FCL influence the delivery service?  How can a tool be constructed to simplify the decision-making process regarding the choice of sending products LCL or FCL?  Method ? A total cost model was developed. This model is supported from existing literature.

Secondary deciduous forests, which have their origin in earlier pasture- and meadow-land in slopes along the lower reaches of the Ume river, are thought to contain high nature conservation values, in spite of a relatively low age. The aim of this study was to clarify how factors as historical use, exposition, disturbance dynamics and successional age influences the conservation values in these types of riparian forests and how this can be implicated in the practical work with conservation and management at Umeå municipality. Sample plots were placed in seven stands with a variation of their historical use, exposition, disturbance dynamics and age of succession. Conservation values as structure, tree-regeneration, abundance and composition of vascular plants, amount of dead wood and the abundance of signal-species were measured and registered. The species composition and especially the composition of tree species, differed between forests with different exposition and different historical use.

The purpose of this report is to compile and examine the cost of renovation of moisture-damaged bathrooms, to derive a target price. The target price can then be used by insurance companies to estimate the ultimate cost of future bathroom renovations.       The method is based on the compilation and comparison of the cost of repairs of previous water damage in bathrooms. The calculations compiled based on repair estimates for different insurance losses from one of the leading insurance companies in Sweden.       The result shows the average price per square meter of floor area for different sizes of bathrooms. The average price is the basis for the estimate of future renovation costs of bathrooms. The results further show that the bathroom finishes, area and the distance between the entrepreneur and the location of the renovation have great impact on the final repairing cost.

A study has been conducted on how organizations in Sweden administer costs of facilities management services internally. There are three main theoretical methods for administering costs. In the first method, costs are maintained on a central level; in the second method, costs are allocated and in the third method, internal transfer pricing is used. The aim of the study is to identify which methods are applied in practice, to evaluate whether the methods fulfill their intended purposes and to study the relationship between the methods used and the cost level of facilites management services. In practice, a large diversity of methods are used for facilities management costs.

At the beginning of the 1970´s forestry feared an imbalance in the future wood supply. Because of this anticipated "timber slump" forest companies undertook a variety of measures to counter this. One of these measures was the introduction of exotic tree species. The choice finally ended up with lodgepole pines which were considered a fast growing tree species compared to our native tree species. Theambition for the new lodgepole pine stands were to run these with rotation periods of between 40-60 years, thus smoothing out the ?timber slump? that was anticipated.

The purpose of this thesis was to create a saw pattern program for the sawmill industry. I have chosen to focus on the module that describes the shrinking on the wood. There are several theories about how the wood deforms by shrinking. Several hypotheses were simulated in the program and after testing them I decided to use only one of them (hypothesis C). The program is written in Visual Basic .NET and I choused that program language because it is easy to do changes in the layout. Another great advantage in Visual .Net is that you can mix different languages in the same program.

Purpose ? The purpose of this thesis is to develop a total cost model for container transports and create a tool that calculates a suitable transport quantity from an economic view, which fulfills the demands on delivery service. To achieve this purpose the following questions will be answered:Which costs are affected by the decision between the two transport alternatives LCL and FCL?   How does the decision of sending product LCL or FCL influence the delivery service?  How can a tool be constructed to simplify the decision-making process regarding the choice of sending products LCL or FCL?  Method ? A total cost model was developed. This model is supported from existing literature.

Urban trees have very little in common with trees on natural sites, such as forests or pastures. Trees in urban environments are often planted in packed soil and in small volumes. This can lead to decreased availability of water and oxygen, as well as deteriorated ability for the soil to store nutritional elements. Also above ground the tree usually have limited space in cities. Regulations on free height over roads and cycle tracks demands high stems at an early stage of their development.

This graduation paper is based on my interest for wood and its different tonal quality?s.After some time of thinking I decided to write my paper on the tonal difference between two of the most common woods in guitars, East Indian Rosewood and European Maple. I had built two identical guitars before my graduation paper in which the difference was the wood the back and sides were made of. One was being made of East Indian Rosewood and the other being made of European Maple.I chose to speak with a number of people with different angle of approach to the two kinds of wood and its tonal difference and quality?s.

This master thesis was done for a company called BRUKS which is active in woodprocessing,bio-energy and bulk material handling industry. The idea for the master thesis wasto develop a new reclaiming method for silos where wood chips are being stored. A mediumsegment of between 1000 ? 5000 m3was defined as the segment with the most sales potential.Two different concepts were produced, one for new constructions and one for rebuildingalready existing silos.In the beginning of the master thesis a lot of time was spent on visiting different BRUKSoffices and customers to get an overview of the industry and the product. This informationwas the basis when the idea generating phase began.