The aim of this study was to develop a simple model for calculating stock costs for bio fuel at Billerud Karlsborg and subsequently recommending a suitable stock level of bio fuel. The stock components considered in the model are GROT (branches and tops), bark, dry Wood chips, raw Wood chips from barking and sawdust. The calculations are based on a probability distribution of historical deviations between ordered and delivered volumes. The model presents two different ways to manage the supply in case of irregular deliveries. The first way is to stock enough volume to cover the deviations and the second way is to compensate with a quick purchase from the spot market (at extra high purchase prices).

This study was carried out at the request of the bio energy company Naturbränsle. The company handles annually 750 000 m3 of chips from logging residues from a large area, from Östergötland in the south to Härjedalen in the north. In that area, about 50 bio fuel plants are customers. When Naturbränsle deliver chips from logging residues to their customers, the moisture content varies from 30 % to 60 %. The aim of the study was to sort out the affecting factors on the moisture content in the chips during handling and storage processes.

A third party access to district heating networks has been proposed in Sweden, to increase the competition on the district heating market. Such third party access could create opportunities for the agricultural sector as an energy producer. This study describes the technical, economical and environmental prerequisites for a farmer cluster to build and run a heating plant, fueled with local wood fuel. The heating plant in the described scenario is 8 MW and will supply a village of 1000 houses, and is fueled with Wood chips exclusively. Supplying a heating plant with fuel puts high demands on the logistics, since there need to be a continuous flow of fuel. In the scenario, wood residues from felling and thinning is stored in stacks in the forest, and a few times a year chipped and transported to a storage area at the heating plant. In the study, an estimation of the profitability has been made by estimating the cost of the investment, personnel, operating and maintenance costs and costs for the fuel and ash handling.

Hallstaviks papermill is an industry plant within Holmen Paper. Hallstavik is a mechanical mill and produce newspaper and journal paper. During year 2000, Hallstavik used approximate 1.200 m3f spruce, either as logs or chips from sawmills. Due to that the production is running continuously the mill also needs raw material at the same rate. At some periods the supply of raw material cannot keep up pace.

Stump biomass is energy rich and stump harvesting for use as fuel become more and more interesting in Sweden. Swedish Forest Agency (2009) has estimated that stump harvesting in Sweden would respond to an annual energy supply of 57 TWh/year. However, stump has not been recognized as a bioenergy resource in Sweden. Suitable methods for pre-treatment of stump are probably of great importance to make it accepted as fuel. It is therefore rewarding to carry out an investigation in this area for stump. This report represents results from a diploma project, which was aimed to develop a fixed bed reactor for experimental study of biomass torrefaction, followed by TG analysis and kinetic modelling employing Ozawa method and different kinetic models including one-step and three-pseudo-component models.

This master thesis was done for a company called BRUKS which is active in woodprocessing,bio-energy and bulk material handling industry. The idea for the master thesis wasto develop a new reclaiming method for silos where Wood chips are being stored. A mediumsegment of between 1000 ? 5000 m3was defined as the segment with the most sales potential.Two different concepts were produced, one for new constructions and one for rebuildingalready existing silos.In the beginning of the master thesis a lot of time was spent on visiting different BRUKSoffices and customers to get an overview of the industry and the product. This informationwas the basis when the idea generating phase began.

The purpose of this study is to explain how the value of sawn wood changes when sawn wood are cut in 30 respective 60 cm lengths. The raw material into the saw mill will mainly be bucked in 30cm and 60 cm modules. There will also be two alternatives where the timber will be bucked special lengths, 370, 490 and 550 cm but also in 490 and 550 cm.The method used for the study is to simulate both cutting and sawing the woods. For cutting the simulator Timan is used and for sawing the simulator Timberopt is used. When data is generatedfrom the simulators, calculations of some key figures is done and also how much the revenue need to be increased for the sawn wood in order to cover for the increased costs of changing sawn woodfrom 30 cm to 60 cm modulesThe conclusion is that the single biggest reason, impacting the value of the sawn wood is the cutting at the saw mill.When going from 30 to 60 cm modules, the impact will be that the customers to the saw mill must pay more to increase the revenue by at least 10% for the sawn wood in order to justifice the changein production.It is also possible to increase the value of the products further by bucking the timber in three lengths, 370, 490 and 550 cm, in order to get 12 % increase of the share of longer sawn wood (>= 480 cm)..

Fire is an important ecological factor, but its consumption of coarse woody debris, CWD, has hardly received any attention. In this study, I investigate the consumption in relation to the time of initial flame exposure and propensity for continued combustion of standing CWD of pine (Pinus sylvestris). Two types of CWD were studied. Firstly, wood that had been dead for one to ten years. Secondly, wood that had been dead for several decades. In the burning experiments, logs of approx.

Since prehistoric time man has used wood to build their environment. The material?s availabilitycombined with its good mechanical properties has often made it the material of choice. Like allmaterials exposed to natures degradative processes the properties of wood decreases over time.Rot, UV radiation and attacks by insects and pests damage wood if not protected. Since we wantwhat we build to consist, optimizing our building materials durability is of great interest.Techniques and methods for increasing the endurance of wood have been developed in severaldifferent places and for a long time.

Public concern about the release of toxic compounds from wood-based products drives legislation towards enforcing industries to find and use more sustainable solutions for wood treatment. Plant oils are good alternatives to treat wood, minimizing or even neutralizing the impact on the environment. Wood modification with epoxidised linseed oil (ELO) and acetic acid as catalyst has proven a suitable method to impregnate and protect wood. However, the mixture presents a serious inconvenience because of the quick polymerization of the ingredients that limits its practical application. Therefore, this study was designed to evaluate an alternative method using a two-step process which bypassed the problem above.

This essay concerns the visual trade grading of pine and spruce.In the 1800s developed rules for sorting of wood. The rules used to facilitate the export trade.The terms of the regulatory sorting systems developed in the 1900s. While it still used some of the older terms.The essay deals with how the grading rules affect the use of wood and how the rule work and how the terminology works.Some of the terms used for sorting are O/S, Kvinta, Utskott and A,B,C,D.You sorting by counting the numbers of knots, cracks and other characteristics of each piece of wood.The sawmills have much influence in how the rules developed.Today it is often already determined in the sawmills which uses each piece of wood most have..

Forest management plans have been sold to private forest owners by wood supplying companies for a long time. These plans are considered to be effi-cient tools to identify measures and wood volumes, and are simply a starting point for discussions between private forest owners and round wood pur-chasers. However, large variations are observed between different purchas-ers, in their usage of the plans. The purpose of this report is to identify to what extent a forest management plan can promote an increase in the amount of wood which a round wood purchaser can obtain and to find differences in the way of using the plans between different wood purchasers. Furthermore, the purpose is also to ana-lyse if varying owner structures can be underlie variations in the selling of forest management plans. Qualitative interviews with nine of Stora Enso?s round wood purchasers were performed.

Tomo Hugglink (TOMO Skog) is an innovation for harvest and transport of biofuels. The system consists of a truck, a chipping unit and crane mounted on a link and a wood chip trailer. The system works in such a way that the chipping unit is disconnected and placed on the site and Wood chips are loaded directly into the wood chip trailer.The aim of this study was:- To examine the performance of the TOMO Hugglink system under different conditions such as the size, placement and quality of the pile.- To calculate the cost per raw ton for two vehicle combinations at different transport distances and to examine the effect of a reduction in set-up time and an increase in load weight.- To identify possible improvements with the TOMO Hugglink system.A time study was conducted within the thesis work to make it possible to determine production and time consumption. In the subsequent economic analysis the cost per tone at different transport distances was calculated for two different lorry concepts. Furthermore the effect of a reduction in set-up time and an increase in load weight was calculated.Under current conditions the utilization of the chipper is low and only 29 % of the total system time is occupied by chipping.

Fuel pellets are in Sweden mainly produced from sawdust and cutter shavings. Before the pelletising process the raw material is dried to attain consistent moisture content and ground up in a hammer mill. In the densification process (pelletising) the ground material is forced through holes in a rotating die. This heats up the wood particles which cause them to soften and self bond. After the process the pellets are cooled, sieved and bagged. The milling process creates a wide range of particle sizes.

Summary Today energy prices are rising. As a result biomass fuel is getting more and more interesting. Wood chips is very popular, but also straw from grain production is on the table. Lunds Energi AB project a combined power and heating plant in Örtofta out of Lund. Wood chips is meant to be the main energy source, complemented by straw. In this thesis the transportation of straw for fuel is studied.