This report describes the design and implementation of a multi-master, packet based protocol for small and tiny microcontrollers where resources are limited. The protocol was named "Tiny Controller Network" or TCN for short. The protocol is meant mainly as a control bus for automation and sensor acquisition applications but due to its flexibility can also be used for other purposes as well. It borrows some of its functionality and design ideas from the well known CAN bus and Modbus but also has a number of major differences like the use of standard hardware and time synchronisation. One of the key aspects during the design was the use of very little system resources and common on-chip hardware peripherals like a UART.

One of the biggest challenges in the human history is to prevent environmental pollution. Everybody has an indirect or direct influence on the environment through his or her consumption. The stakeholders are not just interested in price and quality, they are also interested in the circumstances of production and how this affects the environment. By taking environmental concern in public procurement it is possible to speed up the environmental adjustment of services and products. Environmental awareness has become more and more self evident in the environmental work.

Denna rapport är en jämförande studie av utvalda konsolidanter som används till att stabilisera nedbrutet insektsangripet trä. Av de trägnagande skadeinsekter vi har i Sverige är det främst den strimmiga trägnagaren som är intressant i möbelsammanhang. I rapporten beskrivs den strimmiga trägnagaren, en liten skadeinsekt som kan åstadkomma stor skada om den får verka ostörd. Insekten finns utspridd i hela Europa och är ett stort problem då den angriper alla typer av träslag. Nedbrutet insektsangripet trä förlorar sin styrka och kan behöva konsolideras genom att injicera konsolidanter in i träet.

The aim of this master thesis was to examine a possible connection between chromatin functions and the DNA damage repair system, with the imprinted IGF2/H19 locus as a bait. Interactions can occur within and between chromosomes and it has been shown that H19 ICR on both alleles can communicate with alleles on other chromosomes. The methylation-sensitive insulator protein CTCF is bound on the maternal H19 ICR and acts as an insulator by blocking the IGF2 promoter to access its enhancers. This is possible by formation of loop structures by CTCF that enables intra and inter-chromosomal interactions. CTCF is poly(ADP-ribosyl)ated by PARP-1 when it is bound to H19 ICR.

Headwater streams are affected by anthropogenic impacts at multiple scales. One aspect of human impact is sediment transport associated to the abundance of stream structures as large woody debris and the composition of the riparian zone from forest to agricultural landscapes. Riparian buffer zones and stream structures like dead wood are considered as generally important structures for protection against an increasing amount of sediment particles in the water. Hence, in this study these structures were quantified in thirty different stream segments on land and in the water. To measure the transport of sediment Whitlock-Vibert boxes were used in three different types of landscapes; forest, transition and fields. The boxes were left in the stream segments for three months, the taken up and dried and weighed. The results showed that the transition-land in Frösvidalsån had the highest sediment transport. The second highest transport of sediment was in Blackstaån at the fields.

Med den nya generationen processorer där vi har flera cpu-kärnor på ett chip, så ökas prestandan genom parallell exekvering. I denna rapport presenterar vi en omvärldsstudie om allmän multiprocessorteori där vi går igenom olika tekniker för både hårdvara och mjukvara. Vi har även utfört empiriska tester på ett datorkluster, där vi har testat de två olika programmen Fluent och CFX, som utför CFD beräkningar. För varje program så har tre modeller använts för simuleringar med varierande antal beräkningsnoder. Vi har undersökt vad som är mest lönsamt, att använda en eller båda CPU-kärnorna vid de olika simuleringarna.

AHA is a Swedish abbreviation of "reveal threatened park and avenue trees" and is a method to assess the conservation value of individual trees, mainly in the park environments but also in natural stands. This method has previously only been practiced in southern Sweden (Sörensson 2008). To see if this method could provide satisfactory results in northern Sweden, I have studied it in areas around the Umeå River. This was done by studying the relationship between trees with different classifications of conservation value (as classed by the AHA method) and their content of species (species richness and abundance). Insects were collected using trunk window traps in a period of 13 weeks during the summer of 2014.

Hallstaviks papermill is an industry plant within Holmen Paper. Hallstavik is a mechanical mill and produce newspaper and journal paper. During year 2000, Hallstavik used approximate 1.200 m3f spruce, either as logs or chips from sawmills. Due to that the production is running continuously the mill also needs raw material at the same rate. At some periods the supply of raw material cannot keep up pace.

This master thesis was done for a company called BRUKS which is active in woodprocessing,bio-energy and bulk material handling industry. The idea for the master thesis wasto develop a new reclaiming method for silos where Wood chips are being stored. A mediumsegment of between 1000 ? 5000 m3was defined as the segment with the most sales potential.Two different concepts were produced, one for new constructions and one for rebuildingalready existing silos.In the beginning of the master thesis a lot of time was spent on visiting different BRUKSoffices and customers to get an overview of the industry and the product. This informationwas the basis when the idea generating phase began.

Norske Skog Jämtland AB is like many other companies in a situation where it has to increase its purchases to provide its industries with raw material. To increase the available amount of raw materials, many companies employ purchasers to cover larger areas. This study aims to find out how to handle the increasing competition for timber suppliers. An important input for defining such a strategy is to examine how the suppliers view their relation to the company today. For a company it is extremely important to have a good relation with the suppliers to secure long term supplies.

Deciduous forests are, according to the National Environmental Quality Objectives, a priority area. Deciduous forests are rich in species and the occurrence of dead wood is an important factor for biodiversity. In order to identify valuable deciduous forests for bio-diversity, conservation needs good analyses and planning tools. Habitat models combined with geographic information systems can be used to study the spatial structure of suitable habitat. The Lesser spotted woodpecker (Dendrocopos minor) has been proposed as an indicator species for deciduous forests, since this species is highly specialized on insect larvae in dead wood and requires large areas of deciduous-rich environments. Many riparian forest with high species richness and high nature conservation values are found along the Ume river in Umeå municipality.

Individual identification of pigs could be used in commercial herds for production monitoring, disease monitoring and breeding evaluation. This study investigates the possibility of using microchips designed for dogs and cats to identify individual pigs from birth, through rearing to carcass at the slaughter plant. Two different sizes of microchips, and two different ages of the pigs at injection were tested. Castrates and gilts from ten litters were evenly distributed between chip sizes and injection ages. All pigs were identity marked with both electronic ear tags and injected with microchips.

This report is a thesis work for a B.Sc. in Forestry at the School for Forest Engineers, SLU. The aim of the work was to compare two different pricelists with the actual output from a harvester. The results have also been compared with a volume estimate of standing trees done by the Swedish Forest Agency and the ?true? value registered by the Wood Measurement Association. The study confirms that the output calculated by the computer on the harvester is more reliable than the volume of standing trees estimated by Swedish Forest Agency. .

Södra Skog chose in 2011 to convert the saw mill in Traryd to a gradually refined sawmill of hardwood. In 2009, they had also acquired the hardwood sawmill in Djursdala. This was strategically important for Södra's business since the demand for hardwood products has increased. The standing volume of deciduous trees in Sweden is today approximately 524 million m3sk and it has increased rapidly in recent years. However, the deciduous forests are to a large extent located in areas that are set aside for nature conservation and is thus not available to the industry.The goal of this work is to create a simple and reliable method for mapping of deciduous wood volumes in areas where Södra Skog is operating (Götaland excluding Gotland).The material that is used is raster databases with estimated forest attributes (kNN-Sweden), data from National Forest Inventory (NFI) and forest management plans.

The purpose with this project is to compare different fuels when investing in a central combustion station at a case study farm. I have chosen to write about biofuel from an economical perspective. This because the heating costs are steadily increasing. Also because the farm in this case study has several different heating systems, which are neither profitable nor easy to work with. I have made calculations regarding usage of splinter, wood and grain for the heating system.