Storage of biomass is often associated with problems such as heat development, dry matter losses and reduction of fuel quality. The rise in temperature can potentially cause a risk of self-ignition in the fuel storage. Moreover, emissions from storage piles can cause health problems in the surrounding. The dry matter losses and reduction of fuel quality can have economical effects. The aim of this thesis project is to develop guidelines on how to store large amount of biomass at Vattenfalls heat and power plants in an optimal way.

Old hollow trees of oak contain a large amount of wood mould. Unfortunately, these trees have in the last century been greatly reduced in numbers. It has resulted in that species that depend on these habitats, saproxylic species, have become at risk to decrease in numbers or die out regionally. Previous studies have shown that the volume of wood mould is an important factor for occurrence and population size of saproxylic organisms. The aim of the present study was to examine how the volume of wood mould varies among ash (Fraxinus excelsior), lime (Tilia sp.), maple (Acer platanoides), aspen (Populus tremula) and oak (Quercus robur).

Old hollow trees of oak contain a large amount of wood mould. Unfortunately, these trees have in the last century been greatly reduced in numbers. It has resulted in that species that depend on these habitats, saproxylic species, have become at risk to decrease in numbers or die out regionally. Previous studies have shown that the volume of wood mould is an important factor for occurrence and population size of saproxylic organisms. The aim of the present study was to examine how the volume of wood mould varies among ash (Fraxinus excelsior), lime (Tilia sp.), maple (Acer platanoides), aspen (Populus tremula) and oak (Quercus robur).

This report is a bachelor's thesis of two students from the Energy and Environment degree at KTH Stockholm. Grinda is an island situated Stockholm archipelago. Skärgårdsstiftelsen is landowners and manages the area. Grinda Wärdshus, a guest house located in the island, currently uses an oil-fired boiler as a heating system. The aim of this thesis is to investigate whether wood chips or pellets is, from a sustainability standpoint, a suitable heating method for the guest house.

Wood has always been an important material for people, and it is used for many applications. As for example, fuel for cooking and heating houses, construction materials and for constructing means of transport. Since wood also is a material that with time biologically degrades due to activity by micro organisms and wood fungi it is important to find ways to protect and further lengthen the life span of the material when in service. One method is to decrease the amount of water in the material by impregnation with an hydrophobic oil. The Linotech method which uses only pure linseed oil is one such possible method. The aim of this study was to investigate the possibility to at the same time impregnate and stain/colour wood samples of pine and spruce by using the Linotech method.

This master thesis consists of an investigation of the profitability per hectare in privatly owned forest land. The investigation is based on data collected from Skogsstyrelesen, Riksskogstaxeringen and Skogsforsk. During the last twenty years the prices on pulp wood and saw log have substantial decreased, but during the same time the the volumes from final felling have increased and the cost for felling has decreased, this investigation shows how the netprofit per hectARE after final felling has changed between year 1980-2005 This investigation shows that that the netprofit has stayed on a stable level during the years 1985-2005 even though prices pulp wood and saw log decreased. Much indicates that the demand of swedish pulp wood and saw log will continue to be strong or even stronger wich will give increased prices and an higher netprofit after final felling in the future.

Wood pellets are an upgraded product of residuals from several wood processing industries, for example saw mills and pulp industries. The pellets are produced by pressing the milled and dried sawdust to cylindrical units with a higher density than the initial raw material. Pellets have great benefits compared to the raw material: high energy per volume, good transport and storage properties and homogeneity. Several parameters collaborate in the whole process, which makes it complex. Wood is a heterogeneous material, chemically and structurally dependent on wood parts, habitat and storage procedures.

The climate change the earth today has to face is no longer a global problem when every individual has a responsibility to act. The residents in Sweden have no understanding how their energy consumption affects the environment, nor what measures can be taken to reduce the energy consumption.The use of the energy in new Buildings is considerably lower than in the older ones as conditions have improved and the requirements have been more stringent. As most of the buildings in the future have already been constructed it´s important to take every opportunity for energy efficiency and rebuilding of available buildings will become a significant act. Reconstruction of a building contributes generally to both a reduced individual and a reduced total energy use, while new constructions only keep a low individual energy use but a increase the total energy use. For this reason we present the opportunities for reconstruction, mainly to reach the standards for a passive house..

This thesis has been written with our society?s current energy-situation in mind.Although it only deals with one particular block of buildings, the solutions and suggestions presented herein are quite applicable on other objects of the same type.This thesis is intended to be used as a guideline for energy-preserving projects in general, with an eye to buildings erected during the Swedish ?million-programme? in the sixties and seventies.The paper starts with the acquiring of all necessary blueprints and technical specifications. It then moves on to a thorough description of the buildings in question, and their heating- and ventilation-systems.Followed by this the reader is guided through the successive stages of energy-perseverance measures that are available, and possible. Reasoning around the economic factors concerning all measures is also held.The paper ends with conclusion, and a discussion concerning the delicate issue of the higher return-temperatures possibly reaching the district-heating plant..

To save energy it?s popular to build houses with low energy loss. In these houses the walls are keeping a lower temperature in the external side which leads to a higher relative humidity. In addition more material, such as wood studs, are used which means that there is more moisture to dry. More moisture in combination with higher relative humidity may pose a higher risk of microbial growth.

Dead wood is important for many species. The amount of coarse dead wood (diameter >10 cm) is much lower in managed forest than in unmanaged forests. Stumps constitute the largest proportion of the volume of coarse dead wood in managed forests. Since stump harvest for biofuel may increase, the amount of dead wood will decrease even more, which may threaten biodiversity. The first aim of this study was to compare the amounts of fine woody debris (FWD, .

The private forest owners play a key role in the supply of round wood to the Swedish forest industry. Today it is a keen competition between forest companies about the wood from private forest owners. In order to get access to the wood from the private forestry you need to be an attractive collaboration partner, who can offer long-term collaboration, service at top-level, and acting for good prices to the forest owners. This work aims at analysing the situation on the market today. It gives Sveaskog purchase department a good view of the forest owners? opinion in general about the existing purchase activities. Forestry service level and timber prices are determining factors for a successful relationship between forest company and forest owner.

The basic ingredient of paper is the individual wood fibers. The property of the fibers depends on a variety of factors e.g., method of pulp production and processing. The final sheet quality depends in part on how the fibers interface between each other and therefore factors that affect the fiber size are of interest.The flexibility of the fibers depends in part on the pore water i.e., the fiber swelling. The sheet becomes less flexible at low water content which gives a loss in strength. Thus it becomes desirable to increase the water uptake.The experimental investigation described in this report consists of exposing the wood fibers to different ions and ionic strength and then measure the pore size by thermoporosimetry where a DSC (Differential Scanning Calorimeter) is used.

What is located on the bottom in the water outside of Birka? Remains of a water palisade or jetties and other constructions.Birka a Viking Age town that existed between AD 750 and 975 was located on the northwestern part of the small island of Björkö, in the Mälar archipelago of the Baltic Sea in Sweden. The Town was protected onshore by a hill fort and a town rampart. It is a widely spread assumption that Birka had a water palisade as a part of its defense. There are logs and other remnants on the bottom of the lake dating back to the Viking age.

The purpose of this thesis is to examinethe possibilities for adding a floor to anexisting building using the two materialswood and sheet metal profiles as the loadbearing structure. An apartment buildingfrom the 60s has been used as referencehouse. Two different suggestions for thedesign are presented in the rapport. Oneof them has been analyzed with wood andsheet metal as the load bearing structure.Using the old constructional calculationsand blueprints of the existing buildings,the load bearing capacity has beencalculated. In the calculation programFEM-Design the building has been testedwith the loads that an extra floor wouldgive.