I want to look at the possibilities to start selling hot water from a small district heating plant with bioenergy. My reason for doing this project is to look at a new business opportunity for our farm. Our company have less work during the winter time compared to the spring and this project will give us more work during the winter. I also want to take as much material as possible for heating from our farm in order to increase the value of the products from the farm. The project is in a village near us, where we should support a school, a churh, a home for the aged, a kindergarten and a parish hall with heat. In my work I have compared two different alternatives with each other. The first alternative is to put a central heater in one of the buildings, the home for the aged, in which we will burn oat.

Moisture damage in buildings is a serious issue that leads to problematic consequences and high economic costs. Despite the knowledge and awareness existing about moisture problems, extensive damager still occurs today. Studies of moisture in the exterior wall constructions shows that the issue if often caused by rain and water intrusion. These kinds of problem result in major costs usually because the companies have to replace the material and structural components and also in some cases tear down large parts of the buildings.The work includes moisture theory and descriptions of four different exterior wall constructions, wood stud wall with plastered facade, exterior wall with wood facade, exterior wall with concrete, and exterior wall with brick facade. Our thesis work describes how the constructions are affected and moisture damage due to water intrusion.

Energy is today a very common topic, not only in Sweden but in the whole Europe. In EU they have given out a directive 2002/91/EG about buildings energy use and throw this they have forced their members to show how much energy their buildings use. In Sweden has the gouvernment established a law (SFS 2006:985) about energy declaration for buildings which demands that the building owner needs to show how much their buildings energy consumption are. Important to know is that this law doesn´t applies for industrial buildings.The report will show what the new law about energy declaration for buildings and appurtenant directions will mean for Riksbyggen. Also energy calculations will be done to be able to compare Riksbyggen buildings with the new law and directions.

Title: Kvarteret Tvättstugan, an apartment building with massive wood construction. A thesis about acoustic and fire requirements and a comparison of energy and moisture aspects. Earlier restrictions in the Swedish legislation have resulted that only a small percentage of the apartment buildings that have been built are designed with a massive wood construction. It has been allowed to build unrestricted with wood since 1994 as long as the function of requirements are fulfilled. This change in the rules together with the great environmental benefits of wood has led to that more companies choose to build apartment buildings with wood. One of these companies is Folkhem Production AB.

My Finnish grandfather had a passion for architecture, eventhough he wasn?t an architect. In the end of the 1950s he builta wooden summerhouse on a lot outside of a small villagecalled Lempäälä, close to the city of Tampere. Today the lotbelongs to my mother. Every time I visit our summerhouse, itmakes me want to do as my grandfather did ? to build a smallhouse next to it.My project is a proposal for a wooden house on mymothers lot.

In the year 2002 the European Union decided on a new directive according to the energy use in buildings. The outcome of this direction is a proposition from the Swedish government on the outlines of a new law in the field of energy use in buildings. The date that the law will be applied is the first of October 2006. In the future al real estate owners must be able to show an energystatement over the real estate. This project contains cooperation with HFAB a local real estate company where two buildings are analyzed according to their energystatement.

The purpose of this study is to explain how the value of sawn wood changes when sawn wood are cut in 30 respective 60 cm lengths. The raw material into the saw mill will mainly be bucked in 30cm and 60 cm modules. There will also be two alternatives where the timber will be bucked special lengths, 370, 490 and 550 cm but also in 490 and 550 cm.The method used for the study is to simulate both cutting and sawing the woods. For cutting the simulator Timan is used and for sawing the simulator Timberopt is used. When data is generatedfrom the simulators, calculations of some key figures is done and also how much the revenue need to be increased for the sawn wood in order to cover for the increased costs of changing sawn woodfrom 30 cm to 60 cm modulesThe conclusion is that the single biggest reason, impacting the value of the sawn wood is the cutting at the saw mill.When going from 30 to 60 cm modules, the impact will be that the customers to the saw mill must pay more to increase the revenue by at least 10% for the sawn wood in order to justifice the changein production.It is also possible to increase the value of the products further by bucking the timber in three lengths, 370, 490 and 550 cm, in order to get 12 % increase of the share of longer sawn wood (>= 480 cm)..

Fire is an important ecological factor, but its consumption of coarse woody debris, CWD, has hardly received any attention. In this study, I investigate the consumption in relation to the time of initial flame exposure and propensity for continued combustion of standing CWD of pine (Pinus sylvestris). Two types of CWD were studied. Firstly, wood that had been dead for one to ten years. Secondly, wood that had been dead for several decades. In the burning experiments, logs of approx.

Since prehistoric time man has used wood to build their environment. The material?s availabilitycombined with its good mechanical properties has often made it the material of choice. Like allmaterials exposed to natures degradative processes the properties of wood decreases over time.Rot, UV radiation and attacks by insects and pests damage wood if not protected. Since we wantwhat we build to consist, optimizing our building materials durability is of great interest.Techniques and methods for increasing the endurance of wood have been developed in severaldifferent places and for a long time.

Public concern about the release of toxic compounds from wood-based products drives legislation towards enforcing industries to find and use more sustainable solutions for wood treatment. Plant oils are good alternatives to treat wood, minimizing or even neutralizing the impact on the environment. Wood modification with epoxidised linseed oil (ELO) and acetic acid as catalyst has proven a suitable method to impregnate and protect wood. However, the mixture presents a serious inconvenience because of the quick polymerization of the ingredients that limits its practical application. Therefore, this study was designed to evaluate an alternative method using a two-step process which bypassed the problem above.

This essay concerns the visual trade grading of pine and spruce.In the 1800s developed rules for sorting of wood. The rules used to facilitate the export trade.The terms of the regulatory sorting systems developed in the 1900s. While it still used some of the older terms.The essay deals with how the grading rules affect the use of wood and how the rule work and how the terminology works.Some of the terms used for sorting are O/S, Kvinta, Utskott and A,B,C,D.You sorting by counting the numbers of knots, cracks and other characteristics of each piece of wood.The sawmills have much influence in how the rules developed.Today it is often already determined in the sawmills which uses each piece of wood most have..

Forest management plans have been sold to private forest owners by wood supplying companies for a long time. These plans are considered to be effi-cient tools to identify measures and wood volumes, and are simply a starting point for discussions between private forest owners and round wood pur-chasers. However, large variations are observed between different purchas-ers, in their usage of the plans. The purpose of this report is to identify to what extent a forest management plan can promote an increase in the amount of wood which a round wood purchaser can obtain and to find differences in the way of using the plans between different wood purchasers. Furthermore, the purpose is also to ana-lyse if varying owner structures can be underlie variations in the selling of forest management plans. Qualitative interviews with nine of Stora Enso?s round wood purchasers were performed.

Stump wood is a hot alternative when the heating plants demands more and more forest fuel. The aim with the study has bean to calculate the costs in four different systems for transportations of stump wood, examine if there are any differences in fuel quality for the stump wood in the different systems, analyse if the fuel quality in stump wood is affected with the time it lays by the road side and how much space the stump wood demands on the road side. To calculate the costs for the different systems a system analysis was carried out, where some of the costs were collected through field studies on Holmen Skog stump experiment and other costs were collected from literature and contacts. Data for the fuel quality study was collected from Eons heat plant in Norrköping. Data for the study of how much space stump wood takes along a roadside was collected from field studies.

Should new buildings blend in or contrast from the older buildings around? Could contrasts even emphasize different characters? This report is a discussion on that theme. I´ve studied different architects wiev on the question and studied different of examples of where new buildings contrast to the context in a successful way. In part two I´ve done a proposal on a new housing settlement next to Hammarbyhöjden in Stockholm. The new buildings contrast to the existing and the aim is to emphasize the characters in Hammarbyhöjden as well as in the new structure.

This final thesis is initiated by the wood fuel department at the Swedish forest company Sveaskog as part of a project which also involves two other final thesises. The overall goal of the project is to investigate Sveaskog´s possibilities to produce and sell different wood fuel assortments in Västerbotten and the southern parts of Norrland. The aim of this thesis is to investigate how much wood fuel Sveaskog can produce in the area during the next five years and what that would cost. Furthermore the thesis will investigate the total possible supply of wood fuel from all other possible producers in the area. Treated assortments are forest residues from final fellings, whole trees from direct wood fuel thinnings, non industrial wood and industrial by-products from sawmills. The main effort to investigate Sveaskog´s production possibilities has been made to calculate the possible annual amount of forest residues and fuel from wood fuel thinnings that can be produced.