This study has investigated what makes a business relation satisfactory. The purpose is to distinguish the factors that are relevant to a functioning cooperation relationship between sawmills and DIY-stores. The theoretical framework is primarily based on long-term business relationships. The study is based on two case companies and their relations with wood-suppliers. - Case company 1 is a relatively new established and still growing company.

Business unit Cylinder at ASSA AB in Eskilstuna are having problem with frictions in their production process. Changes are occurring and older products along with machineries are phased out and transferred to low-cost countries. This opens up possibilities to at a larger extend customize physical flows after production flows. The authors where given the task to analyze the production and find problem areas to improve and to give suggestion on how Business unit Cylinder can work to optimize their production flow.The aim of the thesis work is to come up with suggestions on how to reduce the lead time in production and how the tied up capital can be reduced. In more detail the task included to find problem areas that are counteracting an effective flow, give solutions on new flows for the production of the cylinder core, give suggestions for new stock points for the production and how the production shall be managed and controlled.During the last twelve months ASSA AB has sold over 700 different types of cylinder cores, and the product range is very wide.

We are heading towards a huge switch of how energy is produced with fossil fuels being replaced by renewable energy sources. It is not difficult to replace the energy you use in the house and there is no need for futuristic technology. There are already many established products on the market such as high efficiency vacuum solar collectors, heat pumps & small wind power stations that can supply the energy being used in a house. The company Sol & Energiteknik SE AB in Huskvarna has many different products which can reduce the need for an outside energy distributor. An average house in Sweden uses 15 000 kWh for heating, 5000 kWh for tap water and 5000 kWh for electricity.

The general view of learning has dramatically changed during the last two decades. Today we talk about learning for life and educate to meet the demands of the information society. This new view forces us to constantly relearn and develop new knowledge ? something which has resulted in large restructuring within the upper secondary school. New forms of teaching, where the pupils are given the opportunity to a more active search for knowledge, is developing.

In connection with the property crises in many countries, caused by the financial crises, people are now more aware of the risks involved in poor property-investments. The unusually cold winters along with extreme prices of electricity in Sweden in recent years has also contributed to increased interest in energy-efficient buildings.The process of developing a modern family home in Kiruna, Sweden is presented the first part of this paper. The house has been designed to withstand very high stresses from snow, low energy consumption as well as a high standard of living comfort. Aspects of the house covered here involves everything from construction, heating and ventilation to sanitation. Each of these areas is presented based on their underlying, scientific methods or theories.

To what extent do young Muslims relate to the left-right-scale in Swedish politics?: A case study from SUM?s youth conference of 2009.English AbstractIn Sweden there seem to be a growing concern about young people?s waning involvement in party politics. Another group that is sometimes described as uninvolved in politics is immigrants, living in worn down suburbs with low employment and education levels. In expressing sentiments like those above, it seems that ?guilt? is shifted onto young people or immigrants.

AbstractThe assignment were assigned by Camatec Industriteknik AB. Camatec is a Karlstadlocated consulting company, they make everything from pilot studies to complete projects in mechanical design and calculation. They even have their own patented product, Camcoil. It is a winder for steel strips and is used for example with hardening of the steel strip. The assignment has been to solve the problems encountered by some customers within this product.

The aim of this essay is, firstly, to ? through a text analysis ? compare the curriculum of Waldorf education in Sweden (in the essay referred to as ?WL?) to the Swedish national curriculum ?Lpo 94?, to uncover possible differences and similarities between these documents, and, secondly, to present the roots and educational philosophies that these two curricula, respectively, are based upon. The purpose hereby is to be able to trace, describe and explain the differences between the pedagogical practices of Waldorf education and that of conventional Swedish schools.In the essay, a historical investigation of the main traditions of ideas behind the Swedish national curriculum is briefly carried out, where I swiftly present the educational philosophies of John Dewey (1859-1952) and Lev S. Vygotsky (1896-1934). Next, an investigation of the worldview and philosophy of Rudolf Steiner (1861-1925) is effectuated, where I attempt to bring to light Steiner?s anthroposophical and holistic worldview ? a worldview that throughout the 20th century has developed into an international and wide-ranging anthroposophical movement ? as well as his concepts of knowledge, science and educational philosophy.

The automotive market is currently undergoing a historical change where stricter emission legislations and ever increasing fuel costs have intensified the search for effective alternatives to the conventional internal combustion engine, which has resulted in a substantial trend towards electrification of powertrains. Storage of electrical energy is the fundamental component in this technology where the lithium-ion batteries are currently considered as the most appropriate solution. Lithium-ion batteries, however, as other types of batteries, can only be used efficiently and durably within a specific temperature range.This Master thesis has been carried out in collaboration with Electroengine in Sweden AB, situated in Uppsala, which has an ongoing project regarding development of a modular battery system for electric powertrains. The project is at a stage where an initial prototype has been developed which provides the foundation for this thesis. The study has addressed the battery system performance from a thermal perspective, in order to validate the ability of the system to create a thermally serviceable environment for the lithium-ion battery cells.

Latent heat storage is a way to store thermal energy when a phase change material undergoes a phase change. The advantage of latent heat storage is the capability to store more energy per mass unit than other heat storage methods. The most commonly used phase change in latent heat storage is the transition between solid and liquid. Phase change materials can be divided into organics, inorganics and eutectics.In the Nordic electricity market the price of electricity is set every hour by Nordpool spot, which leads to price fluctuations because of changes in demand. The main goal of this report is to create a latent heat storage system in a single-family home and investigate the possibility to save money by charging the latent heat storage system when the price of electricity is low, and discharge when the price is high.The thermodynamic model consisted of a ?tube-in-tube? heat exchanger with phase change material in the outer tube and water as the heat transfer fluid in the inner tube.

Europe has, since the economic crisis of 2007, gained increasing social segregation. The gap between rich and poor has increased and the large number of hidden statistics regarding people excluded from the labor market is greater than in many years. Social exclusion has thus taken a toll on community groups that already before the crisis had a hard time getting included. Groups such as young, elderly, immigrants and people with mental of physical disabilities. To curb this development, the European Commission have, since the 2004 directives, enabled public sector clients to, through procurement of goods, services and contracts, include measures that promote social consideration.Social consideration is a term that have been a part of Swedish procurement legislation since 2007, and was updated in 2010.

AbstractThe project "Sound and Play" have been implemented in collaboration with the toy company BRIO in Malmo. The purpose of the project was to examine whether and how BRIO in the future could develop toys around sound for Toddlers.The problem formulations that would be answered after completion of the project was "How could BRIO broaden its product range with the help of audio toys?", "How can you combine toys and sounds in an interesting way for children?", "How do you create a toy with sound that is fun for the child, but not annoying for parents?". Currently BRIO only has two toys with sound in this age group.The expression of the toy was going to be a mix of classic and cool and the overall feeling of the toy was going to be explorative and arouse curiosity in the child. This feeling would be communicated through simplicity and joy.

The purpose of this thesis is to investigate the possibility to make small, cheap and ultra low power sensor platforms, connected in wireless networks for monitoring of home and industrial environments. The concept is based on ideas from our supervisor, Jerry Lindblom. The developed system consists of a generic platform for different sensors, a receiver and software. A GPRS module from RO Rollytech AB and a database from Gema Industri AB have been modified and used to demonstrate an example of a complete system. To the platform, it is possible to connect any resistive sensor and any sensor that can act as a switch.

I studien tas måttlistor fram för tre barnplagg med funktionsdetaljer. Plaggen graderas för att kontrollera att skillnadsintervallerna är rimliga att skicka vidare till produktion. Studien genomförs mot ett företag som uppgiften utformas tillsammans med och som bidrar med material i form av tyg, provplagg att utgå ifrån, samt handledning.Metoden för studien är huvudsakligen experimentell forskning i form av avmätning, konstruktion, gradering och sömnad. Underlag för den experimentella forskningen består av litteratur. Huvudfokus ligger på gradering då plaggen i studien omfattar ett stort storleksspann innehållande 12 storlekar vilka är 86-152 centilong.

At Volvo Construction Equipment outside Eskilstuna a wide range of heavy equipment machines are developed that are used by a variety of industries worldwide. For the handling and maintenance of these machines a deep knowledge is often required. Volvo CE and their dealer Swecon offer courses for both drivers and technicians that last for 1-2 weeks. Out on the workplaces however, the knowledge from these courses need to be supplemented with information from the machine?s operator and repair manuals.