X-ray fluorescence (XRF) detection of heavy metals is a cost- and time-effective method for investigation of polluted areas. Compared to laboratory analysis, XRF analysis is limited by high detection limits and uncertainties in some situations. Preparation of samples is known to affect the results of measurements.The purpose of this thesis is to bring a deeper understanding of how different factors affect the results of XRF-analysis. A large number of measurements have been made with the instruments Niton XLt 700 and Niton Xli 700. Results from measurements of lead, zinc and copper have been analysed.This study has shown that a greater moisture content will give a lower measured concentration for the same sample.

In the increasing urban environments and the modern societies demands for sustainability there is a challange in planning cities with a balance between density and a satisfying access of recreational environments. For attractive cities these environments need to be designed to fit every inhabitants? demands and opinions in some way. Increased knowledge and understanding is therefore needed about how different design styles in landscape architecture affect people and the cities. In this bachelor thesis benefits and disadvantages as well as the experience and impact of two fundamental design styles i discussed; naturalistic and formal/abstract design.

An overwhelming majority of all male piglets are castrated without anaesthesia when they are very young. In Sweden this means that approximately one and a half million piglets are castrated every year. The reason the piglets are castrated is the strong and unpleasant smell and taste, the ?boar taint? that the meat from intact boars sometimes exhibits. Boar taint is chiefly cause by androstenone and skatole, two compounds that are mostly produced by sexually mature boars and are accumulated in the subcutaneous fat.

Stockholms vattenskärning AB in Kungsängen has through the acquisition of a company begun to design and produce aircraft heaters whose origin is early 1970s which follows a high inefficiency in terms of energy consumption and size.The aircraft heater, which is sold worldwide, serves its purpose for customer satisfaction and has done so ever since it was developed in the 70s.Stockholms vattenskärning AB is now investigating the possibility in making the aircraft heaters more efficient, both in terms of energy consumption but also on a more efficient design with the belief that it would lead them to an edge in the market. The aircraft heater consists of several main components whose function altogether is to keep passenger aircrafts warm while they are on the ground.This project has been limited to the further development of the heat exchanger package which accounts for the conversion of the hot medium to the fresh air being carried in to the aircraft cabin. Work has been divided into different phases in order to create a better understanding of the project range and to make it easier to divide the various elements in the time available, 10 weeks. These phases are literature review, situation analysis, concept generation, CAD, concept comparison and writing reports.After the initial literature review was made, a fundamental theory was written which is essential in understanding the remaining parts of the project.With the theoretical part as support, measurements and calculations were made on the current heat exchange package in a situation analysis to ensure its operation and efficiency.In the concept generation phase, the collected facts from the literature review was used as the basis for creating a matrix. The purpose of the matrix was to indicate the two most suitable types of heat exchangers to develop four new concepts out of.In the CAD phase the four concepts was drawn up and then described with text and images.The last phase is the concept comparison where a concept selection matrix is used to function as a decision basis for further production at Stockholms vattenskärning AB. The four concepts have been developed based on the current heat exchanger and is gradually changed into a design of a cross-flow heat exchanger constructed out of stainless sections. The purpose of this is to have gradual upgrading of the heat exchanger as an option, in order not to saturate the market..

AbstractMy study is based on that I think there is a problem at the Handicraft program for hairdressers where I currently work as a hairdresser teacher. I believe that there are clear objectives and a wide range of courses focusing in craft knowledge, but the social competence goals are unclear and there are no courses on the subject. Since I have 13 years hairdressing experience and know roughly what it requires, I wonder where and how the teaching of social skills is performed at the Handicraft program for hairdressersThe purpose of this study is therefore to find out how some of my colleagues perceive the teaching of social skills. The issues I have focused on are what these teachers believe that social skills are, how they perceive their teaching of it and when they believe that teaching really should be. There is not much literature on this subject because it is a relatively unexplored area. I have therefore concentrated on literature dealing with social skills in general, and theses and essays dealing with the quality of hairdressing education. I have chosen to make a qualitative interview study. The objectives related to social skills can be incorporated in the teaching of many subjects; I chose to interview two core-subject teachers and four vocational teachers. The interviews have been based on respondents' own interpretations of social skills. They have been individual interviews of about 30 minutes. My results show that most teachers believe that social competence is about a good meeting between people and to coping with different situations in a good way.

AimThe aim of this study has been survey the possibilities for short-term stays in the Stockholm Archipelago for people without their own means of transport, own equipment and/or experience of outdoor life.To fulfil this aim, the following questions were formulated:? What communications are available to chalet parks in the Stockholm Archipelago?? What overnight accommodation is available in the chalet parks in the Stockholm Archipelago?? What activities can be pursued in the Stockholm Archipelago?? What is the financial cost of travelling to and staying in the Stockholm Archipelago for a week?MethodWe chose to use six interviews and three observations in order to gain as much insight as possible. Interviews were conducted with Claes Petterson at Waxholmsbolaget, a company that provides transport services in the Archipelago, and with managers for five chalet parks: Rolf Andersson for Finnhamn, Per Englund for Grinda, Arne Johansson for Rånö, Pär Hjärtström and Peter Hösöyen for Gålö and Anders Bedinger for Gålö and Nåttarö. The interviews were recorded in writing and on tape. Observations were carried out at three chalet parks, i.e.

AbstractAim: The aim of this study was to investigate if treatment with ?dry needling? in myofascial triggerpoints (MTrPs) in the rotatorcuff muscles may affect impingement symptoms such as pain during provocative tests, shoulder mobility, and function. The research questions were: Does the value of pain change on the Visual Analog Pain Scale (VAS) between before and after treatment? Do the positive provocative tests for impingement change between before and after treatment? Does the active shoulder mobility change between before and after treatment? Does the self-rated function change between before and after treatment?Method: The study was a prospective randomized intervention study and 19 persons with impingement symptoms (mean ± standard deviation; 58 ± 18 years, and shoulder pain duration 3.9 ± 1.6 months) were randomized into two groups. The groups were tested before, directly after and 3 weeks after treatment.

My thesis is a combination of theory and practice, where theory is meant to create a context and a background for my interpretation proposal. I wanted to ?access? the ideas that are always in the background of the reasoning which underlies both planning in a larger scale, and the design of a place. I wanted to make a ?work of ideas.? In the process of shaping the proposal, I wanted to be deleted from the site itself.

The aim of this study is to investigate which communication strategies and channels the mu- nicipal company Falu Energi & Vatten should use in order to become more efficient in com- municating with citizens between 18 to 29 years old. The company is owned by the munici- pality of Falun and manages community services in electricity, district heating, fresh water, sewerage, metropolitan area network and waste disposal. The following theories have been used in the study: convergence culture, digital natives, information overload, communication strategies and uses & gratifications theory. The methods used in the study are 4 focus group interviews and one informant interview. The members of the focus groups where within the age range 18-29 years and lived in the city of Falun.

One way of signalling commands to the horse during riding is through applying tension on the reins to create bit pressure in the horse?s mouth (Terada et al., 2006; Clayton et al., 2011). The skilfulness of the rider in using the hands when applying bit pressure has consequences both for the horse?s performance and welfare (Manfredi et al., 2010). At the trot there are large vertical deviations of the horse?s body which the rider must adjust and adapt to (Terada et al., 2006) and an unsteady hand due to inability to follow the horse?s movement can be a source of discomfort and conflict behaviour in the horse (Heleski et al., 2009).

AbstractThe project "Sound and Play" have been implemented in collaboration with the toy company BRIO in Malmo. The purpose of the project was to examine whether and how BRIO in the future could develop toys around sound for Toddlers.The problem formulations that would be answered after completion of the project was "How could BRIO broaden its product range with the help of audio toys?", "How can you combine toys and sounds in an interesting way for children?", "How do you create a toy with sound that is fun for the child, but not annoying for parents?". Currently BRIO only has two toys with sound in this age group.The expression of the toy was going to be a mix of classic and cool and the overall feeling of the toy was going to be explorative and arouse curiosity in the child. This feeling would be communicated through simplicity and joy.

Many companies with expansion plans may eventually need to take a decision whether tomove parts of the organization abroad or not. One example is how Swedish companies? placesits production in Asia where labor is cheaper, but at the same time wants to use Swedishengineers. The communication possibilities today makes it no longer necessary to travelacross the world to have a meeting, and questions can be answered in a matter of minutes.This means that a company that is spread out over the world still can communicate betweentheir employees.When participants in a project are spread out over the world, and can?t meet in person, it iseasy for problems to appear.

The Internet provides the common user with a variety of both traditional and non-traditional news sources, and a vast range of possibilities to contribute to the flow of information. By their participation in the production of information ordinary citizens can sometimes function as non-traditional news sources them selves and reach a potentially unlimited audience. The interactive nature of the Internet blurs the line between producers and consumers, and challenges traditional definitions of what counts as "news" as well as who qualifies as a "journalist". The main purpose of this thesis is to examine the potential consequences of this decentralization regarding the information behaviour of newspaper journalists and their perception of their professional role. The study consists of qualitative interviews with six journalists, employed by four of the leading Swedish newspapers, and a review of earlier research in the field.

This study investigates three different methods for evaluating MOE,Modulus of Elasticity, in field measurements. The purpose is toinvestigate the possibility to use dynamic measurement methods infield measurements that hitherto (2010) has been performed with staticmethods. The objects of investigation are 20 glulam beams. The firstfield measurement took place in november 2007 and applied a staticmethod based on the standard SS-EN 408. The second measurement,described in this study, took place during summer 2010, and appliedstatic as well as dynamic methods.The MOE of wood is affected by a range different factors.

AbstractAim: The aim of this study was to investigate if treatment with ?dry needling? in myofascial triggerpoints (MTrPs) in the rotatorcuff muscles may affect impingement symptoms such as pain during provocative tests, shoulder mobility, and function. The research questions were: Does the value of pain change on the Visual Analog Pain Scale (VAS) between before and after treatment? Do the positive provocative tests for impingement change between before and after treatment? Does the active shoulder mobility change between before and after treatment? Does the self-rated function change between before and after treatment?Method: The study was a prospective randomized intervention study and 19 persons with impingement symptoms (mean ± standard deviation; 58 ± 18 years, and shoulder pain duration 3.9 ± 1.6 months) were randomized into two groups. The groups were tested before, directly after and 3 weeks after treatment.