This project investigated the current market regarding wireless net and the communication between the tools used for diagnostics/maintenance and an embedded system. Based on documentation obtained through interviews a demo system was created based on Bluetooth Low Energy (BLE) communication between an embedded system and an Android device.This report intends to describe the tools and methods used in the design of the demo system and the result of an analysis of the BLE communication.Bluetooth Low Energy is an exciting protocol with wide applicability within the industrial field. This project investigated the communicational possibilities between a Smartphone and a Raspberry Pi and based on the results that emerged the conclusion can be drawn that BLE is a protocol with many beneficial applications within industrial IT..

The aim of this thesis was to investigate the possibility of integrating an item tracking systemwith a monitoring system currently under development at Fifth Generation Technologies (P) Ltd.A literature study of RFID technology and the networks ZigBee and MiWi was done. Based onthe literature study a concept for a distributed system was developed.The concept is to have several RFID readers placed in the area where tracking is to be performedand allow them to communicate with each other through wireless communication. The RFIDreaders shall be able to form zones and filter the data that is forwarded from the zones to theservers and thus perform some of the work that the server would normally have to do. Theconcept has been evaluated by prototype development and testing. The prototype uses an ultrahigh frequency RFID reader and a MiWi network.The test indicated some limitations with the selected technologies.

Trådlosa nätverk är av naturen sårbara for avlyssning för att kommunikationen sker med radiovagor. Därfor skyddas trådlosa nätverk med kryptering. WEP var den första krypteringsstandarden som användes av en bredare publik som senare visade sig innehålla flera sårbarheter. Följden blev att krypteringen kunde förbigås på ett par minuter. Därför utvecklades WPA som ett svar till sårbarheterna i WEP.

Det finns idag goda möjligheter att beröringsfritt kontrollera elektroniska objekt. Ett exempel är belysning som aktiveras via rörelsesensorer.Enkla lösningar innehåller oftast sensorer för ljud, ljus eller rörelse vilka används för att aktivera ett styrobjekt, vanligen genom att slå på eller av en elektronisk strömbrytare kopplad till styrobjektet. Behövs det mer säkerhet och möjlighet att bevisa för styrobjektet vem individen är som försöker få styrobjektets uppmärksamhet behövs det mer än en enkel sensor. Det behövs en anpassning för att separera olika bluetoothenheter från varandra. Bluetooth är en teknik för att trådlöst skicka information mellan två enheter.

Användandet av trådlösa nätverk breder ut sig mer och mer både bland företag och privatpersoner. För privatpersoner kan det vara skönt att slippa sladdarna som ett vanligt nätverk för med sig och för företag kan det trådlösa nätverket fungera som ett komplement till det vanliga i miljöer där man inte kan eller vill använda vanliga nätverk. Det är ett smidigt sätt att koppla upp sig mot ett nätverk utan att vara fysiskt ansluten till det. Smidigheten har dock ett pris i form av att det är lättare att avlyssna trådlösa nätverk i och med att kommunikationen går genom etern och det saknas fysiskt skydd i form av byggnader och lås som finns för traditionella nätverk. Med tanke på detta är det viktigt att man säkrar nätverket på ett ordentligt sätt. I detta arbete har jag studerat trådlösa nätverk; hur de fungerar, vilka hot som kan finnas och vad man kan göra för att skydda sig.

This report is the result of a diploma work made at IMT at US in Linköping. The purpose of this piece of work is to investigate the possibility to design a general program for data-acquisition using LabVIEW, suiting different hardwares and connections. Great importance has been attached to communication with serialport, using bluetooth, because different wireless PPG-instruments has been developed parallel to this project. These PPG-circuits uses this type of serialcommunication. Communication with USB, GPIB and analog connection has also been examined and analog communication has been tested practically.

The purpose of this thesis is to show how to use vulnerability testing to identify and search for security flaws in networks of computers. The goal is partly to give a casual description of different types of methods of vulnerability testing and partly to present the method and results from a vulnerability test. A document containing the results of the vulnerability test will be handed over and a solution to the found high risk vulnerabilities. The goal is also to carry out and present this work as a form of a scholarly work.The problem was to show how to perform vulnerability tests and identify vulnerabilities in the organization's network and systems. Programs would be run under controlled circumstances in a way that they did not burden the network.

Syftet med denna rapport är att göra en förstudie vid campus Norrköping rörande trådlöst nätverk. Det finns många olika standarder och tekniker. Vi har valt att rikta in oss på 802.11b då det är den som används mest. Trådlösa nätverk är ett bra komplement till vanliga kabelburna nätverk då det är flexibelt, relativt billigt och lätt att installera. Användningsområden för denna typ av nätverk är bland annat företag, hemmamiljö och allmänna platser såsom hotell och flygplatser, där människor kan förvandla improduktiv väntetid till effektiv arbetstid.

Fortum has in a pilot project installed metering equipment with wireless communication in secondary substations in Stockholm. So far, the collected data are used only in specific projects.This master thesis was carried out at Fortum Distribution AB in Stockholm during 2013. The purpose of this study is to simplify and enhance the use of data in for example network planning process, by giving suggestions on how data can be managed and giving examples of analyzes that collected data can be used for.The electricity meter which Fortum has installed is a EDMI-Mk10A which is set to measure max/average/min values with a one hour time resolution of the following parameters: voltage (per phase), current (per phase) andactive power and active and reactive energy.In order to analyze the collected data an analysis tool is required. During this thesis two customized tools in Microsoft Excel have been developed, one for sorting data and one for analyzing.One aim of the thesis is to show examples of what collected measurement data can be used for. This work shows an example of analysis of active power, power factor, voltage, occurrence of interrupts and the relationship between outdoor temperature and power.This master thesis has among others resulted in the following advice: Expand the number of secondary substations with measuring equipment.

This report is a part of a diploma work, conducted as a part of a Master of Science degree. The diploma work consists of a preliminary study, two case studies, a user study, a paper and this report. It was created at the Linköping University for the department of Science and Technology, in cooperation with Unilever Research in the UK, and partly with the EC founded project, Smartdoc IST-2000-28137. Hand-held, mobile devices like Personal Digital Assistances (PDAs) are becoming increasingly popular in today?s wireless world.

Near Field Communication, NFC, is a short-range wireless communication technology that enables data exchange between devices in a secure way. A NFC phone has the potential to enable the convergence of wallet, phone and keys, but as many other technological innovations, the launch is struggling. We have discovered that technological innovation is only the first step. For an innovation to be adapted, there need to be business model innovation too. Many actors form the ecosystem of NFC and the business model for each service is still an unsolved problem.

As a result of a successful human development around the world an extensive urbanization of societies are taking place that are networked in various ways. In these networks, increased travel and digitization are central where individuals and organizations converge in a constant and immediate wireless and mobile technology flow. An example of this is Stockholm and its public transportation company Storstockholms Lokaltrafik (SL). Although most participate in most of the network society, SL is struggling with an audience that seldom travel with them: families with children. We intended to find out how the communication of SL´s digital platforms could get families to travel more with public transportation.

Purpose: The purpose is to research different co-operations between venue owners and WISPs, when WLAN is deployed in a public space. The aim is to establish viable business models for the interaction between the two vital actors in the public WLAN industry. In this work, the advantages and disadvantages of revenue and cost sharing will be defined, along with technical and commercial issues that need to be resolved. Methodology: A number of case studies of the current situation have been conducted in the most attractive venues for WLAN, airports. As the public WLAN market had most widespread adoption and is most mature in the USA, case airports were chosen both there and in Scandinavia.

The interest in tiny wireless applications raises the demand for an integrated reference oscillator with the same performance as the macroscopic quartz crystal reference oscillators. The main challenge of the thesis is to prove that it is possible to build a MEMS based oscillator that approaches the accuracy level of existing quartz crystal oscillators. The MEMS resonator samples which Philips provides are measured and an equivalent electrical model is designed for them. This model is used in the simulations of the Pierce oscillator and the transresistance amplifier oscillator that are evaluated in this thesis. Finally the Pierce oscillator is implemented in the A BCD2 process and manufactured at Philips Semiconductors in Nijmegen, The Netherlands.

Användandet av trådlösa nätverk ökar med rask takt och blir allt vanligare. Enligt en artikel i Computer Sweden kommer de trådlösa näten att ha 20 miljoner användare om 4 år. Analysföretaget Gartner Group har nyligen gjort en undersökning bland företag, vars syfte var att ta reda på hur stort intresset var för WLAN. Resultatet visade att 50% av företagen funderar på att köpa och installera WLAN-lösningar (Planet Wireless september 2001). Syftet med detta arbete var att beskriva hur den inbyggda krypteringsfunktionen WEP som för Wired Equivalent Privacy fungerar och hur säker den är, dvs hur lätt man kan knäcka krypteringen.