This paper goes through solar energy and what uses it has. It is also a guide in the choice of solar collectors forthe real estate that I have drawn for the thesis work.Solar energy is a renewable source of energy from the Sun's light. Energy can be used to produce both heat andelectricity through solar collectors and solar cells. Some of the benefits of solar energy is that it is completely freeto extract, environmentally friendly and virtually maintenance-free. Disadvantages are that the technology isexpensive, does not cover the entire energy needs and takes a long time until it pays.

Today the human being see energy as a matter of course but the resources that is used for extract energy is today not enough for the world demand. Of all the energy that is used in Sweden today approximately 40 % goes to the building stock. This number will most likely increase if not necessary actions will be made on the already existing building stock since new houses constantly are built which will be added up on the already existing energy supply. This takes cause of action on the already existing building stocks, to fulfill the demands of the future use of energy that has been set by the authority. At the same time the thermal conditions cannot be influenced by the necessary changes that must be made.

The need for snow-free surfaces at squares, bus stops, platforms, car parks and sports facilities increases and at the same time energy price rise and the environment is becoming a hotter issue. The construction of the ground heating systems often lack thermal insulation under the heating pipes, which means that the heat from the pipes not only warm up the soil surface but also heats the surrounding soil. The insulation also has more features, by insulating the risk of frost damage is minimized. The goal of this report is to demonstrate the large heat loss and energy costs in the absence of insulation under the heating system.The report begins with a scientific way to study and treating the soil heating system uses, and the theory involved. Furthermore it also deals with different routing principles of heat pipes depending on the facility.All calculations are made with so called finite element method (FEM), in COMSOL Multiphysics 3,5a, where models are created with different conditions.

The purpose of this paper is to identify the current status of fuel cell technology and to establish whether said technology is mature enough to be implemented into the Swedish Armed Forces. The question to be answered in this paper is as follows: Can hydrogen gas and fuel cells be used as an alternative source of energy within the Swedish Armed Forces?This paper is based on theoretical studies and reports from prior research done on fuel cells. By studying these facts a predictive answer has been obtained. The answer I have come to, is that the maturity of fuel cell technology is currently inadequate for the Swedish Armed Forces to implement, especially considering its harsh working conditions..

The demand for environmental assessments on buildings and energy consumption is increasing as well as the energy performance requirements for buildings. At the same time it is increasingly common with self-producers of heat and electricity generation.The main purpose with this master thesis is to investigate how time resolution affects the environmental assessment of energy consumption in office buildings connected to district heating (DH). Environmental assessments were done with both attributional LCA and consequential LCA with system expansion.Fortum´s DH system in Stockholm was analyzed and district heating production was simulated in a Matlab-model. Greenhouse gas (GHG) emissions for the production were calculated. The heat demand of the office Gångaren 16 in Stockholm was simulated in IDA ICE.

Cost allocation ? a study of how Swedish energy companies allocate costs between electricity and district heating in a combined heat and power plant District heating is today the most utilized alternative for heating in Sweden. In a combined heat and power plant (CHP) electricity and heat are cogenerated. The environmental and economic advantages with this kind of production are high. A problem in a CHP-plant is to allocate costs between electricity and heat since both products are generated in the same process.

I Sandviken har man tillverkat kalldragen tråd sedan 1870-talet. Idag är det Wire Sandviken AB som står för produktionen. Här tillverkas rostfri fjäder-, svets-, platt-, medicin- och finmekaniktråd. Produkter från Wire Sandviken AB återfinns överallt i det dagliga livet, t.ex. i elektronik, i bilar, i aerosoler, på oljeplattformar, i leksaker och sportutrustning såväl som hos tandläkaren.

Teknikämnet har, sedan det fick en egen kursplan, åsidosatts i skolorna. Deltagande observationer och intervjuer med lärare verksamma i varierade åldersgrupper, visade samma resultat gällande tankar kring teknikundervisningen som de uppfattningar som litteraturstudien visat. Det framgår att många lärare inte uppfattar sin ämneskompetens som tillräcklig och att de inte vet hur de ska förhålla sig till ämnet i undervisningen. Resultaten av dessa studier ligger till grund för ett läromedel, bestående av en elevbok och en lärarhandledning, som utgår både från Lpfö 98 och centrala innehållet för år 1-3 och 4-6 ur kursplanen i teknik i Lgr 11..

This thesis considers the use of an oldrock cavern as thermal energy storage.With a large system of differentchillers a model was created to find anappropriate future system. There aremainly two trajectories to take. Eitheran installation of chillers needs to bemade or the rock cavern can be used tomeet the future demand of districtcooling in Solna, Sweden. Additionallythis thesis investigates the possibleuse of different techniques to utilizethe phase change energy of water.Simulation shows that it?s possible toutilize the phase-change energy of afluid; however it?s not economicallyfeasible due to the thermodynamiceffects on the Carnot cycle.

The purpose of this study is to understand the factors that are affecting students at the Technology and Electricity- and energy programs in their choice of studies and vocation. The study is a comparative case study and quantitative method has been used in the form of questionnaires. The result shows that students do not like to be affected by another person but believes that they themselves have made their choice. Interest turns out to be the biggest influence factor of choice for both students at the Technology and Electricity- and energy program. For Electricity- and energy students have also access to work had some impact.The parents' education level was higher for Technician students and their parents worked with occupations requiring university degrees.

Virtual Design and Construction (VDC) is currently used more and more within construction design and planning as well as construction as a streamlining tool aiming to improve communication and decrease the number of construction defects. VDC is constantly developing, but what comes next? The augmented reality (AR) technology is currently not used within construction in Sweden but should be considered as the next step in line regarding the integration of reality and digital information. Using this technology design can become reality even before it?s actually built.The purpose of this study has been to carry out an inventory of the existing AR technology and its shortcomings, and also to identify possible applications within the construction phase.

If a building is heated by a heat pump, it is of high importance that the heat pump has a high coefficient of performance. An exhaust air heat pump extracts heat from the building?s exhaust air. The air has a relatively high and constant temperature all year around, leading to a high seasonal coefficient of performance. This thesis examines whether it is profitable to complement an exhaust ventilation system with an exhaust air heat pump in an apartment block that already has geothermal heat pump, district heating, oil- or biofuel heated system.

With the increased significance of information technology (IT) in today?s society the term ?electronic democracy? (e-democracy) has gained much importance within the democracy theory. Naturally, there are several competing views on how the technology should be used for democratic purpose. One aspect of this is the somewhat revitalized claim for direct democracy in accordance with the hypothetical opportunity to finally realize it as a democratic system. The ideal of direct democracy combined with the almost total credence in the potential of technology constitute the idea of a ?push-button democracy?.

In hydropower plants it is necessary to always have local power supply. Therefore, the plants are equipped with batteries as stationary back up power. Vattenfall Vattenkraft is using lead acid batteries but has been investigating alternatives to replace them. The aim of this study is to investigate the potential of using Li-ion technology as back up power.The study showed that Li-ion batteries have many qualities. The Li-ion technology will decrease the space and maintenance demand.

Virtual Design and Construction (VDC) is the definition for using BIM in the construction process to simulate and analyse the building. Resulting use of the technology will according to proponents lead to fewer construction errors, a better understanding between stakeholders for the construction project, less communication problems and a smoother construction process. Although BIM has according to researchers a big potential, few companies have succeeded in broad and continues implementation. The study aims to identify the factors affecting the implementation. More precisely identify what factors influencing the decision to adopt VDC and potential barriers in the diffusion process. The empirical findings are based on a case study of NCC Construction Sweden.