As a company it is required to work with strategies to minimize costs such as packaging and logistic costs. The increased market of industrial produced wooden buildings results that the time and the cost which the packaging of prefabricated building elements consume, is experienced to be in greater need of development than before and demands a better solution. The aim with this dissertation was to discover how the development of the handling of the packaging can improve the packaging process. The goal was to present improvement proposals for a simplified and thereby a more efficient production in time and cost perspective.The packaging process which includes packaging, handling, storage and transport were studied. Interviews were made with participants from the market for manufacturers of wooden houses and a case study was made at the company A-hus.

Intergovernmental Panel on Climate Change (IPCC) recognizes glaciers as the best land-indicator of climate change. A variety of studies have concluded, using both modeling and field studies, that above all climate parameters precipitation, particularly winter precipitation, and summer temperature controls the change in glacier mass balance. With global warming almost all glaciers on Earth are losing mass. In this study, the summit-glacier constituting Kebnekaise's south summit (called the Southern-summit henceforth), Sweden's highest point, is studied to see how it is affected by winter precipitation and summer temperature during the period 1968?2013.

Glulam?s position at the Swedish market for building constructions has been established over the past decades. Factors affecting glulam demand are found both in global and national contexts as well in customer attitudes and knowledge of the material. Arguments for environmentally friendly and sustainable construction processes and energy-efficient designs are nowadays common, which is something that should motivate increased usage of wood as a renewable material. For the glulam industry to increase its sales, improve profitability and thereby gain market share in present competitive climate, reliable market information and updated market intelligence is required.

Hydropower is an important source of energy in Sweden and accounts for about 46 % of the total energy production. Sweden has about 1 200 hydropower plants and with the intention of raising the pressure head of the water and to store water, dams are built by the power plants. The storage reservoirs make it possible to adjust the energy production by demand and season. Dams in connection to the reservoirs are subjected to additional loading during periods of high floods or when an icecap in the winter is formed on the reservoirs. In order to maintain the dam safety, the power companies in Sweden are working with guidelines for dam safety from RIDAS.

The sun is essential to life on earth and no matter where you are, there is a constant need ofenergy. Nearly 800 000 years ago man learned for the first time to use fire in a controlled way.Since then, fire has given us the opportunity to inhabit places despite a cold climate. In Swedenthe resident sector accounts for a major part of the total consumption of energy. In a time whenenvironmental issues and greenhouse effects are increasing, we also see a future of rising energyprices. With this perspective, we have in this bachelor thesis in the Building Environment at theRoyal Institute of Technology, KTH, in Stockholm decided to focus on the renewable energysource, solar energy.The energy from solar radiation is a free resource and does not have any negative effects uponthe environment.

Fossil fuels are affecting our climate negatively and there is a limited amount of them in the world, which leads to the importance of finding alternative fuels. One alternative is biogas, which is produced though a digestion process of different organic materials in a biogasreactor. Organic substrate that comes from farms has the biggest potential to increase the production of biogas in Sweden. Primarily crops from farms, but also waste products like manure are of great importance.Today there is a calculated theoretical potential for biogasproduction of 14TWh per year, which is around ten times larger than Sweden?s production today.

Titel in original language: Ett Temporärt Magasin : Fallstudie av Västra Götalandsregionenscentralmagsin i VänersborgLanguage of text: SwedishNumber of pages: 37Keywords: conservation, preventive conservation, public art, temporary storageISSN 1101-.

The aim of this Master?s thesis was to find out more about the delimiting quality- and shelf-life parameters over time for liquid oat-based products. According to that, to present applicable subjective and objective shelf-life test approaches at accelerated conditions. The study aimed to gain a deeper knowledge concerning the general and accepted way of performing accelerated storage tests. This study focused especially on products, which suffer from quality failure caused by oxidation, such as liquid oat-based products.

Oilseed rape is an important crop in Sweden and is grown on about 90000 ha today. The interest in oil seed pro-duction is increasing because of growing demand and high prices for oil seed both in Sweden and Europe. However, an increased intensity in the oil seed production can bring higher risk of yield losses due to fungal diseases. The purpose of this study was to investigate what different fungi are associated with oilseed rape under field conditions and if their incidence is correlated to crop establishment problems. This study was carried out in three parts: 1) investigations on fungal community structure in roots and rhizosphere soils from young spring- and winter rape plants sampled in failed respectively good establishment patches in four fields, 2) investigations on the pathogenicity of fungi isolated from oilseed rape in controlled environment and 3) investigations on the effect of different fungicide seed treatments on germination and early plant development in a field soil naturally infested with damping off- and Verticillium wilt pathogens. The studies on community structure using a combined approach of standard fungal isolation techniques and DNA based methods revealed a high fungal diversity in three out of four studied fields of spring rape and winter rape. For some unknown reason, very few fungal species were identified from the fourth field.

To curb greenhouse gases and mitigate climate change is one of the biggest challenges human society face today. Carbon dioxide (CO2) has accumulated rapidly in the atmosphere as a consequence of burning of fossil fuels and deforestation. The aim of this study is to explore two methods to store carbon dioxide in geological formations and biological sinks. The aim is also to discuss the two mitigation options from a sustainable perspective and whether it can lead to a better environment and benefits for local and global societies. The research questions are: Which method to store carbon dioxide, geological or biological, is the most effective? Which method to store carbon dioxide, geological or biological, has the greatest potential to promote sustainable development for local communities?The method used is a comparative case study and presents four case studies that explore the potential for CO2 storage offshore in Norway and Brazil; and in tropical forests in Mexico and Brazil.

AbstractWe have been honored to work with a company called Frimeko AB. Frimeko is located in Halmstad where they make and sell furniture for school and office environment. Our task is to construct a new, more modern sewing machine table for schools. The task is to use the same function as before, ease the storage and production of sewing machine.Efforts to develop the new sewing machine table resulted in that we came up with an innovative design that the company is pleased with.During this project the group has used the method from ?Fredy Olsson Konstruktion? .

Many invasive species propose a big threat against the native fauna in the area that they colonise. Today the raccoon dog (Nyctereutes procyonoides) is speeding from Finland over the border in to northern Sweden. A project to stop the spread and eliminate the individuals that already have established was initiated in the autumn of 2008. To investigate areas that might be interesting for raccoon dogs and to confirm sightings, cameras with auto triggering mechanisms are used. To get the raccoon dog in front of the camera some kind of lure is used. In this study three kinds of different lures was tested against each other?s.

For Swedish companies to compete with low wage countries, developments in theproduction industry moved towards streamlining the entire company. One of themost effective ways for a company to streamline their operations is to review theirproduction. All companies have processes in their production that add no value tothe product. In order to compete, they must be eliminated.The purpose of this report is to reduce work in process (WIP) in the flow ofbashus at Volvo Powertrain in Köping. The aim is also to try to find reasons whyVolvo Powertrain feel that they have problems with the storage principle First in-First Out (FIFO).To meet the objective, empirical studies were conducted at the company whilethe literature in the area was studied.

Abstract The purpose of this work is to investigate children?s perception of Swedish birds. Through qualitative questions there were twelve children interviewed. I showed the pictures for the children of different animals that we discussed but with focus on birds. The children could partly distinguish which of the pictures that represented birds and who did not.

The production of cheese is in continuous development with objectives to in-crease productivity, achieve changes in shelf life and functional properties of the products. One concept in the development is to substitute milk fat with vegetable fats and oils in the manufacture of cheese. The objective of this study was to investigate effects on cheese yield and cheese quality of 4 different semi-hard analogue cheese products produced by substituting milk fat with vegetable fat, each analogue cheese with a specific mixture of vegeta-ble fat. As reference a cheese produced with anhydrous milk fat was used. The yield and recovery of fat and protein were determined by recording the weights of each cheese direct after press and after 20±2 days of storage and analysis of the composition of the cheeses after 20±2 days of storage. The cheese was fur-ther subjected for texture profile analysis in a TA-XT Plus Texture Analyser and analysed with Differential Scanning Calorimetry (DSC) to examine whether the fat behaves similar in the cheese as in pure form in respect to its thermal properties. The cheese yield was not significantly different when using different fats. Differ-ent amounts of water were absorbed during the water cooling.