The last decade has created an increasing pressure on companies to decrease their impact on the environment and to increase their effectiveness of recycling the company?s resources, especially for the steel industry. Companies have also started to realize the economic aspects of an effective internal reverse logistics. In the past the value of an effective internal reverse logistic was something that companies tend to underestimate and there are few academic studies done in this area. The purpose of this essay has been to identify key factors to create an effective in plant storage, transport, sorting and handling of returned steel. From these factors a generalized model for creating an effective return steel flow will be developed.

This bachelor?s degree thesis was conducted in mechanical engineering at Halmstad University during spring semester 2010 in close collaboration with the company Gremo AB, located in Ätran, Sweden. Gremo AB produces, developes and sales forest machines in both Sweden and on the international market.Gremo AB belongs to one of the market leaders in forest industry, especially with their forwarder. In order to become a market leader even with their harvester, the company decided to change the harvester to have a swivel and a leveling driver cabin.The aim with this bachelor?s degree thesis was to develop a design concept for the harvester driver cabin, which Gremo AB can apply on the new harvester.

This bachelor?s degree thesis was conducted in mechanical engineering at Halmstad University during spring semester 2010 in close collaboration with the company Gremo AB, located in Ätran, Sweden. Gremo AB produces, developes and sales forest machines in both Sweden and on the international market.Gremo AB belongs to one of the market leaders in forest industry, especially with their forwarder. In order to become a market leader even with their harvester, the company decided to change the harvester to have a swivel and a leveling driver cabin.The aim with this bachelor?s degree thesis was to develop a design concept for the harvester driver cabin, which Gremo AB can apply on the new harvester.

To investigate effects of nitrogen on in-lake CO2 and CH4 production during winter, three pair of lakes was subject for a fertilizing experiment in which one lake in each pair was fertilized with nitric acid (HNO3) directly into the water column in the summer of 2012. The lakes in each pair are assumed to be morphologically, hydrologically and biologically similar, that is, the non-fertilized lakes are considered references. The pairs do differ in one major way by being progressively less humic, going from around 25 mg/l to 10 mg/l DOC. Sampling and analysis was carried out at the end of the frozen period in 2013. Results show a significantly higher concentration of both CO2 (p<0,001) and CH4 (?=0,1, p=0,053) between impact and reference sites in the two less humic pairs.

Evaluation of machinery costs is necessary for selecting appropriate farm machinery. Timeliness cost due to untimely operations is an important component of machinery costs. Timeliness costs can be high for crop sprayers, since pesticide application must be carried out within a short time interval. This Master thesis investigated the timeliness cost and the probability of a suitable workday for spraying. Timeliness factors were estimated for four different crops (oats, spring wheat, winter wheat and barley) using historical weed trial data.

This study is commissioned by the Swedish University of Agricultural Science (SLU - Department of Forest Resource Management) in coorporation with Sveaskog and Vilhelmina Norra Sami reindeer herding community. The purpose of this study is to analyse movement patterns and habitat use of reindeers during two winter seasons (2005/2006 and 2006/2007) in areas affected by forestry activities such as clearcutting. This study examines the possibilities of analysing information from Reindeer husbandry plans and forest variable data from kNN and SMD, in relation to GPS collar points from reindeers by using Geographical Information System (GIS). Lack of knowledge and understanding between the reindeer industry and the timber industry has often led to heated debates. The possibilities of using this type of technique are very interesting and could increase knowledge concerning land-use issues to different resource users. The main results from analyses comparing SMD, kNN, data about clearcuts, and GPS collar points from reindeers indicates that clearcut areas, younger forest, coniferous forest on lichen-dominated areas and areas dominated by pine was preferred by reindeers during the winter period.

Selenium (Se) is an essential trace element that is involved in several physiological functions in mammals. Mostly, Se is bound to proteins, many of them with enzymatic functions. A group of seleno-depending enzymes, glutathione peroxidases (GSH-Px?s), are important as antioxidants and protects against free radicals. The activity of GSH-Px is strongly regulated by Se storage in the liver.

This bachelor?s degree thesis was conducted in mechanical engineering at Halmstad University during spring semester 2010 in close collaboration with the company Gremo AB, located in Ätran, Sweden. Gremo AB produces, developes and sales forest machines in both Sweden and on the international market.Gremo AB belongs to one of the market leaders in forest industry, especially with their forwarder. In order to become a market leader even with their harvester, the company decided to change the harvester to have a swivel and a leveling driver cabin.The aim with this bachelor?s degree thesis was to develop a design concept for the harvester driver cabin, which Gremo AB can apply on the new harvester.

The aim of this study was to investigate how seasonal variations affect the quality of logging residues. The study was hosted by VIDA Energy. Logging residues can be processed and transported within different systems. Today the dominant systems are chipping at landing and bulk transportation of logging residues. In these systems the handling of the logging residues are carried out in the same manner up to the landings. Moisture content at the time of chipping is the primary quality parameter. Fine fractions of logging residues are strongly dependent on moisture content in storage.

Time studies in dairy production are an essential tool when deciding about level of mechanisation and automatisation both in investment situation and improving efficiency in existing operations. In previous investigations such studies have been carried out during normal barn conditions during winter. Since there is a compulsory to have dairy cows grazing 3 to 5 months during summer time in Sweden time studies during this season is important to have a full picture of needed working time. During grazing season time studies was carried out at 14 dairy farms representing herd sizes from 66 to 450 dairy cows of which 6 farms with AMS. 8 farms were the same as studied during winter season.

The New National Elevation Model (NNH) is a new high-resolution digital elevation model (DEM) of Sweden from airborne laser scanning. It creates many new opportunities, particularly in the area of flood mapping. NNH is provided by Lantmäteriet in two formats, both in raw LIDAR (Light Detection and Ranging) data and in grid format with two meter resolution. These alternatives have advantages and disadvantages and the aim of this thesis research is to identify these. One of the focuses of the study is data storage and thus data structure analysis, resolution and storage facilities. The research questions are:Why and in what context the different NNH-products from the National Land Survey are used (DEM 2+ or point cloud)?What constraints and opportunities are created by the different options, mainly in terms of different software, resolution, and data storage?The study area is Kärsön in Ekerö municipality located in Stockholms län and has an approximate area of 25 square kilometers. The study is divided into two parts. The first objective is to identify the consequences of using different software to create DEM from pointcloud compared to the DEM2+ model. Height models with a two meter resolution are created in FME and ArcGIS. The models are then compared with the grid from Lantmäteriet, created in TerraScan. The second objective is to examine the impact of the change in resolution, both the storage aspect and both the accuracy aspect. Inverse Distance Weighted (IDW) is an interpolation method which in previous studies proved to have the best results on high resolution LIDAR data. This model was tested and compared with a model from FMEs built-in function and the model from Lantmäteriet wich are based on triangulation (also proved a good method in previous studies). The grid created in TerraScan has good properties such as accuracy.

Preservation of cells and tissues by freezing at temperatures below 70°C has led to new possibilities for the storage of germ cells for fertility preservation. During the freezing process problems might occur, the greatest being ice crystallization which can cause membrane destruction and thus cell death. To minimize this risk, solutions that reduce the freezing point can be added to reduce crystallization and increase survival rates. These solutions are called cryoprotectants. The best method for freezing is still not known.The aim of this study was to analyze the effect of various parameters on the survival rate of human semen frozen with liquid nitrogen.

The purpose of this thesis is to investigate and clarify the facts surrounding one of Vattenfall's district heating plants; The "solar field" and associated rock cavern in Lyckebo, Storvreta. The plant was built in the '80s by the formerly municipal utility,Uppsalakraftvärme AB, as an experimental building. A ground water filled cavern would serve as seasonal storage of solar heat from an adjacent solar field. Since both the energy company and the facility itself has undergone major changes over the past 30 years, there was a great need to gather facts in order to provide a picture of its current condition and potential for continued use. The thesis investigates the plant's history and problems with the rock cavern losses, and how the operation developed. It also presents the calculations regarding the possibilities of again supplementing the facility with solar energy - which is not the case today - as well as the economic conditions for it. Regarding a re-launch of solar energy, primarily a concentrating solar collector has been studied, as it has the advantages of an integrated control system.

Boplatsvallar, often translated as semi-subterranean settlements, is an ancient monument with a diffuse definition. Defined as ?embankments that partially or completely surround a often lowered/dug down surface- this category of ancient monuments is also made up of a former category which traditionally was interpreted as winter settlements from the late Stone age in Sweden. This view of the ancient monuments carried over, to a certain extent, to this new definition. Should this be the case, that this category of ancient monuments are remains of winter settlements,  used recurringly over an extended period of time, then they should exhibit similar signals in regards to the distribution of the anthropogenically altered soil chemical and soil physical properties at the sites.The area around Lillsjön, Anundsjö parish in Ångermanland, have four boplatsvallar located separately in the regional area.

Nynas produces bitumen at two refineries in Sweden. The bitumen is shipped to seven depots along the swedish coast line, and from the depots special trucks handle the transportation to customers. Recently Nynas has transformed its supply chain and closed down a few depots. At the moment the company is considering a further reduction of the number of depots. In connection to these discussions an analyse of the companys distributionsystem and of possible changes is required.