Uppdragsgivaren Saab Electronic Defence Systems i Jönköping erbjuder ett flertal produkter främst inom avioniksystem. För att kunna utvärdera och kontrollera produktens design i ett tidigt skede så kan en simulering av systemets beteende och att felsöka så tidigt som möjligt vara ett möjligt alternativ. En systemsimulering kan innebära att mjukvaruutveckling och felsökning kan påbörjas långt innan hårdvaruprototypen är tillgänglig, med samma storlek och komplexitet som systemet.Andra fördelar med simulering är att det går enklare att fastställa orsaken till systemkrasch, hitta de längsta exekveringstiderna och göra felinjiceringar. Syftet med detta examensarbete är att testa och utvärdera hur simulatorer och emulatorer är som utvecklings- och testverktyg.Rapporten innehåller en marknadsundersökning där tio stycken emulatorer och simulatorer hittades. Av dessa valdes två stycken ut, Wind River Simics och Imperas OVPSim.

This report is an outcome of a master degree project at Linköpings University in co-operation with Micronic Laser Systems AB. The purpose with this master degree project was to investigate how to implement a receiver in a data transfer system. The system consists of several data channels, where every channel consists of three parts: driver, transmission lines and receiver. The driver send low amplitude differential signals via the transmission lines to the receiver that amplifies and converts it to a single-ended signal. The receiver has to be fast and be able to feed an output signal with high voltage swing.

This report describes how the system may be exposed to oscillations and how this can lead to resonance. Resonance is a phenomenon that occurs when a system is affected by external periodic oscillations with frequencies close to the system's natural frequencies. Structures subjected to resonance can risk great damage and destruction, why resonance is something that is important to take into account when designing structures. Alternative ways to counteract resonance is to supply damping in the system. Damping means that the resonance decreases instead of letting the amplitude increase.The report discusses some examples on constructions that have experienced the effect of resonance.

The number of data centers and their capacity is increasing throughout the world. Theenergy used in these data centers and the emissions from the use are increasing at thesame rate. The total use of energy will double from 2008 to 2011 based on the trends indata centers use. Research in this area says that the emissions from data centers willhave surpassed the level of airline traffic in 2020. The index used today to compare howefficient a data center is, called PUE, is lacking some information.

This report is the written part of a bachelorthesis on the computer engineering program atUniversity of Halmstad. The project was a cooperate project that where done together withFree2move Holding AB. Free2move is a company with eight employees in Sweden and four inMalaysia. The company is today developing Bluetooth modules and RFID chips. The market forthis kind of products is growing very rapidly, last year it grew 71 percent.

Titel: Fostran som pedagogiskt projekt. Bilden av ?problembarnet? i statens offentliga utredningar. (The bringing up of pupils as an educational project. The image of ?the problem child? in governmental committees).   This study focuses on the image of the problem child as it appears in two texts (from the 1940s and 1970s) of governmental committees on Public Health (SOU) and the new school law (Ds 2009:25, will be implemented in July 2011).

Swedish law (SOL 2001:45, LVU 1990:52) has gone through several changes to promote participation. The law also includes that young people should be able to participate even during a placement at youth detentions.  The aim of this study is to describe how young people at youth detentions are participated in their treatment plans. The questions of the study were: How and where are the young opinions produced in their treatment plans; how did the opinions change during the time in detention; and how have the opinions been considered at youth detentions? Participation is a wide concept with different meanings. The meaning of participation in this study is that youth have been listened to and that their opinions have been paid attention to.

I denna studie undersöks hur gemenskap och sammanhållning i en ungdomsblåsorkester ser ut och hanteras både utifrån orkesterledarens och de deltagande ungdomarnas synvinkel. Även betydelsen av gemenskap och sammanhållning och hur den tar sin form är frågor som besvaras i uppsatsen. Datamaterialet består av intervjuer med olika grupper av ungdomar ur den studerade ungdomsorkestern samt en intervju med orkesterns ledare. Den studerade orkestern kommer från en stad i mellersta Sverige. I resultatet visas att det är viktigt med en orkestergemenskap och att gemenskapen fås och visar sig i både sociala och musikaliska aktiviteter som bland annat resor, läger, fikastunder, repetitioner och konserter.

This report describes how the system may be exposed to oscillations and how this can lead to resonance. Resonance is a phenomenon that occurs when a system is affected by external periodic oscillations with frequencies close to the system's natural frequencies. Structures subjected to resonance can risk great damage and destruction, why resonance is something that is important to take into account when designing structures. Alternative ways to counteract resonance is to supply damping in the system. Damping means that the resonance decreases instead of letting the amplitude increase.The report discusses some examples on constructions that have experienced the effect of resonance.

This report describes how the system may be exposed to oscillations and how this can lead to resonance. Resonance is a phenomenon that occurs when a system is affected by external periodic oscillations with frequencies close to the system's natural frequencies. Structures subjected to resonance can risk great damage and destruction, why resonance is something that is important to take into account when designing structures. Alternative ways to counteract resonance is to supply damping in the system. Damping means that the resonance decreases instead of letting the amplitude increase.The report discusses some examples on constructions that have experienced the effect of resonance.

Detta examensarbete har genomförts i samarbete med byggteknikavdelning på Ramböll Sverige AB, i Norrköping/Linköping. På företaget finns ett behov av att förenkla arbetet med vindlastberäkningar för hallbyggnader enligt Eurokoden. Idag använder företaget en förenklad metod som överdimensionerar. För att kunna göra en mer exakt beräkning helt enligt Eurokoden och effektivisera arbetet har det i detta examensarbete skapats en beräkningsmall för detta ändamål. Beräkningsmallen har tagits fram i programmet Microsoft Excel.För att också kunna se konsekvenserna av att jobba med en förenklad metod, har det utförts en jämförelsestudie mellan två befintliga projekt på företaget.

Thesis Purpose: The purpose of our thesis is to explore different plausible scenarios concerning the future of the Swedish produce industry with regards to branding. Methodology: In order for us to answer the research question and fulfill its purpose, we have utilized a qualitative approach combined with of both an inductive and deductive theoretical approach. Our study is both explorative and speculative. Theoretical Perspective: The theoretical framework of our research is based upon Porters Five Forces and Competitive Advantage combined with Kapferers Brand Identity Prism and his ideas on Brand Innovation. Additionally, we have utilized the Game Theory.

Lattelement AB in Ornskoldsvik is one of the leading companies in Sweden in composite elements in walls, floors and roofs in particular. The company supplies elements to buildings located with a wide geographical variation, which means that the products are subjected to very different climate with regard to snow, wind and humidity. This places high demands and requires the elements to withstand large variable loads.The elements are made of lightweight beams with flanges of structural timber and beam webs made of OSB. These are bound together by nogging pieces with the same kind of structure. On top of the beams a nailed and glued plywood is added to absorb compressive forces and on the underside of the element a sheet of steel is added for tensile absorption.These elements are then attached to the building framework in different ways depending on the particular element height, loads and the structual supporting material of the frame work.

This master thesis covers the seasonal planning of a small scale hydropower system. The system in this study is owned and operated by Mälarenergi Vattenkraft AB. The total system consists of 4 different main rivers with 24 hydropower stations and several dams. The total installed power in the system is 43.75 MW. Most of the hydropower stations are regarded as small scale hydropower stations and thus entitled to green certificates.In this report the issue of planning is formulated as an optimization problem.

The division of Electricity at Uppsala University runs a project called Lysekil project, they have designed a buoy that uses the waves to create electric power from a generator attached to the bottom of the sea.Uppsala University is closely connected with the company Seabased and the university makes use of their facilities in Lysekil. When they designed the buoy issues occurred, the geometric design was flawed, brackets with a short shelf life and it is generally uneconomic.A study visit was done in Lysekil on Seabased facility. With this visit the project started, which is to improve the design of the buoy and the attachment of wires leading to the generator. In this project we have chosen to use a beam system with three beams that are attached to the buoy. Then a wire attached to a plate that sits between the beams will be leading to the generator. Two proposals for construction are created, what distinguishes them are the brackets between the beams and the buoy.From these constructions, the design that is considered most optimal for our project is chosen.All parts of the buoy have been modeled and the drawings are designed in ProEngineer software.The two constructions are compared with each other, but the whole focus is on the second and final structure. The report begins with an introduction describing Lysekil project, and a task description of our project.The project aims to produce an optimal buoy that will be easy to design, materials restrictive with good durability and an economical solution.Wave power true function has been studied, mechanical and finite element analysis of beams, buoy and plate design.This has been presented in this report, where in the various chapters can read more about the processes. Although the relevant facts and information on this project and buoy development is included.