On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

Plant tRNA isopentenyltransferases (tRNA-IPT, EC 2.5.1.8) have two roles, modification of tRNA and contribution to cytokinin synthesis. tRNA-IPT is among the best studied of the tRNA-modifying enzymes, but little biochemical information is available and none for the plant enzymes. Therefore two sets of experiments were conducted. The first one aimed to determine the kinetics and substrate specificity of the tRNA-IPT AtIPT2 from the higher plant Arabidopsis thaliana. The second project aimed to study the role of IPTs from the moss Physcomitrella patens in the production of cytokinin hormones.

It is important to investigate the potential of biological control measures in agricul-ture, especially where economic issues restrict the use of expensive inputs or when there are environmental concerns about toxicity of agrochemicals. The bacterium Bacillus subtilis has proved promising as a biocontrol agent (BCA) in suppressing various plant diseases and it has also been shown to promote plant growth in certain cases. During this study, the effect of B. subtilis on Fusarium wilt (caused by the fungus Fusarium oxysporum) on tomatoes, as well as its effect on the earthworm species Pontoscolex corethrurus was investigated. Furthermore, the combined ef-fect of the BCA with P.

This report summarizes the development of a calculation program estimating the profitability of converting a peak-load oil-fired boiler to pellets. To convert an oil-fired boiler to pellets a new fuel handling system must be designed. Changes also have to be made to some other components. Since there are many different techniques for transportation, storage and treatment of the fuel only the most interesting techniques from Swecos experience and interest were included in the study.The capacity of the different parts in the system was dimensioned based on the power of the boiler after conversion. To estimate prices, installed power and dimensions manufacturers and distributers were contacted.

Our purpose in this paper is to examine if there is any profitability for a company with a factory in the timber industry to invest in a combined heat and power, CHP. Based on analysis and the results that the paper generates, we will give Derome AB a suggestion on how it is a profitable investment or not to installing in a CHP.By investing in a CHP plant, you can get a high efficiency, which means that companies can use their resources more effectively. The Swedish wood industry has by-products of production that can be used for combustion in their boiler which is an advantage.The essay is a qualitative study where we have a case company, Derome AB. In this company, we interviewed two employees who have knowledge in the study. They have helped us to provide information and data about their business.We chose to use the pay-off- and the net present value method, NPV, to see if there are profitable advantages for the investment.

2 (45)AbstractAuthors: Gunnel Forssell Ehrlich & Alexandra WinbergTitle: Gender in local press ? a quantitative study of four local newspapers Level: BA Thesis in Media and Communication StudiesLocation: Linnaeus UniversityLanguage: SwedishNumber of pages: 50The report shows a quantitative study of balance in gender and position of power in the local press. The study aimed to shed light on the distribution of space in the newspaper between men and women, those within power and those without in Swedish local press. The study was conducted with four newspapers, during a month of time with local editorial news material. In our study, we have assumed Lippmann?s and Strömbäck?s theories of pseudo-reality and distribution of gender and position of power in Sahlstrand and Jarlbro.

This study has focused on testing the following two hypotheses:? Pest resistant plants have higher levels and/or several different kinds of secondary metabolites. ? Induced defensive systems in resistant plants are activated more rapidly than those of susceptible plants. As a background for the test of the hypotheses a short literature study was performed concerning plant defensive mechanisms in Arabidopsis thaliana.

Extended Producer Responsibility (ERP) is a form of product take-back regulation that requires the producers to manage their products at the end of life. By internalising the products? entire life cycle costs into the market price the ultimate objective of such regulations is to reduce the environmental burden from the products. This Master´s thesis seeks to examine if the total life cycle cost of a product actually is borne by the producer, and if not, predict who will then take this cost. This is done by analysing the market for take-back activities in three different categories of products; electrical and electronic equipment, cars and wind power stations.

Emissions of insufficiently treated wastewater, mainly blackwater (i.e. wastewater from toilets), contributes to the eutrophication of lakes and seas. At the same time, blackwater is a fraction with a low content of heavy metals and, after sanitization, it can recirculate plant nutrients to arable land using the liquid composting treatment method. Liquid composting means that organic material is degraded under aerobic conditions. For sanitization, the blackwater needs to be treated together with energy-rich complementary material.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

In Uppsala, Sweden, Vattenfall has a combined heat and power plant. On the premises there is an engineering workshop with old fluorescent and mercury lamps that need to be replaced. This provides a great opportunity to save energy and money by installing more efficient lighting. The main purpose of this study was to present two functional and energy efficient lighting systems including control system. The lighting systems were designed by investigating the working environment, measuring illuminance and by simulations in the software DIALux.

This rapport contains an examination of the energy consumption of a kindergarten, which areas that have the largest impact on the energy consumption and what can be done to reduce those areas in ways that are relatively easy and profitable. It is also analyzed if it is possible to reduce the energy consumption from today?s consumption to a consumption that fulfils the demands placed on low energy houses by FEBY.The focus has been on reducing the energy consumption of the areas ventilation, heating system and hot water system, since those seemed to be the easiest ones to affect and since the building is quite recently built.There are different kinds of ventilation systems, at the moment the building have a CAV-system, which means that the ventilation is too high during large parts of the day. There are different ways to manage the ventilation system, for example presence detection, humidity sensors, CO2 sensors, temperature sensors and season adjustment. Many of those are in the end dependent on CO2 sensors to guarantee a good indoor climate, therefore the focus have been placed on this system.

Kärnkraftverk är högteknologiska system med hög komplexitet och utan att hantera den här komplexiteten kan små olyckor få katastrofala följder. Närvaron av komplexitet försämrar förmågan att förstå situationer, minskar kontroll samt ökar risken för incidenter. Stabsarbete inom kärnkraftsdomänen kräver ett agilt beteende för att hantera den höga närvaron av komplexitet. Agilitet är förmågan hos en enhet att framgångsrikt genomföra, hantera och/eller utnyttja förändrade omständigheter. Syftet med arbetet är att utveckla ett mätverktyg för att identifiera indikatorer på agilt beteende i stabsverksamhet inom kärnkraftsdomänen.

This has been a thesis work for an bachelor degree at Umeå university. The work has been done at LKAB?s facilities in Kiruna and its main purpose has been to investigate and construct some conceptual designs for replacing a screen with magnetic separation in KA3 concentrator plant. First all information available about magnetic separation was gathered and studies of magnetic separation at the sorting plant and studies of the plant KA3 was conducted. Companies that manufacture magnetic separators were contacted.