The project aimed to develop a protective and stabilizing insole called Trailplate for soft andlight shoes. The demand came primarily from off-road runners in France, Switzerland, andAustria. The project was carried out at Icebug, a company that develops shoes mainly forrough terrain. The main focus has been on the trailplate which is designed to fit severaldifferent shoes.Torsional stiffness and bending resistance were the main objectives. To improve the existinginsole, a material with the right features was required.

Swedish energy policy aims to increase the use of energy from renewable sources and this should be done in a safe, environmentally and sustainable manner. According to the Energy Agency the use bio-fuel increased by 73% between 1990 - 2006. Stands with high share of slash are often located on areas with high productivity which often are located on soils with poor bearing capacity. This will increase traffic on susceptible soil leading to increased ground damage. To reduce the risk of ground damage at slash-forwarding, ground protection is needed.

The requirements for operative planning activities are increasing. The forest industry wants to gain better control over wood flow. A felling that is more market adjusted is desirable. However, this causes problems in the operative planning process because of the data collection methods used today. Data about timber assortments and data about the distribution of the tree diameter, etc., are often lacking. Airborne laser scanning is used to a greater extent than before for estimation of forest variables and should perhaps be used to the same extent in operative planning activities as well.

Purpose: To evaluate how a treatment period on four weeks in a warm climate influences physical function, condition and the patient's experience of the climate effect of patients with ankylosing spondylitis. Method: 10 persons with a diagnosis of ankylosing spondylitis went through four weeks of treatment on Centro Forestal Sueco, Marbella. The treatment consisted of both physical and theoretic lessons given of a rehabilitation team. All patients were examinated measured for physical function and condition before treatment, after two weeks and at the end of the treatment. To measure physical function, Timed-Stands Test, Timed Get Up and Go, The Bath Ankylosing Spondylitis Metrology Index, Index of muscle function and functionestimitation of shoulder/arm were used.

In the current situation a big part ofthe settlements that exist in Sweden isin need of renovation and energyefficiency in order to survive.Therefore, also many of the older houseswith a wooden structure are in a need ofenergy efficiency, which can be done ina variety of ways, including addinginsulation.This project deals with whether the useof a diffusion barrier or a vaporbarrier affects a wall structure byadding insulation to an older house witha timber frame. The insulation materialswhich are concidered in thisinvestigation are mineral wool and woodfiber insulation. Efforts are focused onthe effects of moisture on theseinsulation materials.To demonstrate the differences thatarise the moisture measurement programWUFI have been used to simulate avariety of wall designs. These designsare developed in consultation with theconstruction carers who are active inthe industry.Using WUFI graphs illustrating themoisture levels of the wall structureswere obtained and from these conclusionsvould be drawn. The work demonstratesthe differences that arise when using adiffusion barrier or vapor barrier inwall construction.

IASB is currently working with the replacement of IAS 39 Financial Instruments: Recognition and Measurement. The new standard IFRS 9 Financial Instruments is said to be based on principles as opposed to the more rules-based IAS 39. This thesis examines the third phase of the project regarding micro hedge accounting. The expressed goal from IASB is to provide more useful hedge accounting information by reducing complexity of the standard. To examine the potential effects of the transition from the rules based IAS 39 to the more principles based IFRS 9, we have performed a case study on a major Swedish bank.

Bakgrund: Smärta är en av de vanligaste orsakerna till att människor söker akut vård. Adekvat smärtbedömning är förutsättningen för god smärtbehandling. Syfte: Att belysa resultatet av sjuksköterskans användande av smärtskattningsinstrument för bedömning av akut smärta hos vuxna patienter på akutmottagning. Metod: Litteraturstudie med ett systematiskt arbetssätt. Resultat: Val av smärtskattningsinstrument: VAS och NRS är tillförlitliga instrument för att bedöma akut smärta.

This paper investigates the compensation for risk in the context of the Swedish stock market with a special focus on downside risk. Using daily market data collected from the A-list of the Stockholm Stock Exchange between the years 1983 and 2005 the purpose is to answer the question whether Swedish investors are compensated for holding stocks with high downside risk, measured as downside beta. Using panel data analysis it is shown, in accordance with most previous evidence in international research, firstly that stocks with high beta values on average experience higher returns than stocks with low beta values, and secondly that stocks with high downside beta values experience higher returns than stocks with high beta values in general. On the other hand, cross-sectional regression methodology using a bivariate regression approach shows that downside beta does not explain excess returns very well. Instead, regression analysis suggest that high upside beta does a much better job in explaining excess return over this time period compared to downside beta.

Detta examensarbete har gjorts i syfte att få fram förankringslängder till ett bergförankrat vindkraftverk.Målet med examensarbetet har varit att få fram längder på förankringstag och en prövning av flera olika stagvarianter har gjorts.Det dimensionerande momentet och egentyngden på vindkraftverket har tagits från ett tidigare projekt beläget i Solberg. Dessa krafter har fördelats ut till stagen och förankringslängder har tagits fram. De delar som har hanterats i rapporten utöver dimensioneringen är stagvarianter, borrning av stag, injekteringsbruk och provdragning. En bottenplatta i form av en oktogon har använts i dimensioneringsprocessen. Stagen har placerats i en cirkulär form i ett lager.

Magnetic resonance imaging (MRI) has the potential to be used for the diagnosis and study of osteoarthrosis in the equine tarsal region. In the development of new diagnostic MRI techniques cadaver specimens are often used. To allow the use of cadaver legs for these types of studies it is important to know the effect of time after death on the MRI image. Since the relaxation times are temperature dependent, it is interesting to examine whether the time after death and the temperature of the cadaver may play a role in the image appearance and quality. The radio pulse sequences that show the different types of tissues are also important to know when pathological evaluation with MRI is used.

Within all industries, there is a change in working time required; this also includes the construction sector. However, the way construction sectors are differentiated is by not having been given the opportunity to be practiced or tested.  The aim of this thesis that we have done in collaboration with the Concrete Industry was to investigate the possibility of developing an automated method for quality assurance of SKB at the site. The idea is to make the O-funnel to be more utilized and therefore ensuring that the appropriate concrete quality is provided which eventually would lead to a better development in the production process.The project has involved theoretical work and laboratory experiments. The theoretical work gave us a good foundation at the beginning of the project. After gathering the information and material, the laboratory experiments began by SCC in their laboratory in Hammarby. The collected data from the various laboratory tests formed the foundation for trying to relate measurements for consistency of SCC with each other and therefore find out how measurements from O-funnel varies with different concrete mixtures.

Saab Bofors Dynamics har som huvudsaklig verksamhet att utveckla missiler. Ofta krävs det att någon form av navigationsfunktion byggs in, och eftersom det inte är lätt att testa nya lösningar och algoritmer direkt på missilerna har man tagit fram två autonoma testplattformar, Freke och Gorm, i form av självgående bilar som kan ta sig fram inomhus i t.ex. en korridor.För navigation utomhus lämpar sig GPS väl i många situationer, men i autonoma sammanhang är det inte tillräckligt. GPS är inte alltid tillgänglig på grund av att man inte alltid har fri sikt till minst fyra satelliter och i militära sammanhang är den också lätt att störa ut. Därför förlitar man sig hellre på noggranna tröghetsnavigeringssystem (TNS) som kan ge data i 100-tals Hz, och kompletterar med GPS för att korrigera för avvikelser.

Problem Faith in the power of advertising has varied largely through the ages, and since we know that advertising is paid for, it therefore has less weight than the usual news. Publicity through promotional activities is in turn difficult to control. The question which of these two ways to communicate with the market that is the most effective, is equally entitled to ask, as difficult to answer. Purpose/Aim This paper is designed as a pilot study with two different objectives that go hand in hand. The first overall aim is to investigate how advertising and PR / publicity can be measured with the same tools while designing this metric.

The viscosity of air buildings is a hot topic within the construction performers, which the industry feel they have too little knowledge about. This study is mainly aimed against air density in apartment buildings and airflow measurement. The study consists of a theoretical reference, educational visit, interviews and a survey conducted among construction workers at Magistratshagen in Linkoping.Earlier requirement in terms of air leakage through the climate screen was removed and today there are only energy requirement for a dwelling in Boverkets Building Regulations. The difference between a passive and a typical air tight construction is that the passive house have a maximum requirement of 0.3 l /s m2 of air leakage through the building climate screen. The requirement imposed on passive houses is to minimize the supply of power and energy for heating the building.Air tight constructions have heavy demands on the performance and accuracy of everyone involved with the project. The client must specify their requirements and also be prepared to pay for any additional costs. The architect and building planners have to design the building with regard to air tightness. Finally, the construction workers are required to do a careful work in order to get all the connections in the building air tight.The study suggests that an air tight building is a closed system where no forced ventilation exists. There are no reasons not to build too tight as long as there is a functioning ventilation. In this study the authors ask themselves how an air tight building changes over time. No theoretical information has been found on these changes, but the respondents assume that air density decreases with time. The deterioration is mainly assumed to be caused by construction materials changes over time. The study shows that construction workers knowledge of air tight construction is mixed, which they themselves admit in the survey..

This degree project has been carried out by Carolina Rapp and Jenny Tauson, students at Innovation and Design Engineer program at the Faculty of Technology and science at Karlstad University. The project was carried during Spring of 2009 and took 15 weeks of full time work.  Doppelmayr/Garaventa Group is an Austria/Switzerland corporate group and its associated company Doppelmayr Scandinavia lies in Sunne, Sweden. Doppelmayr/Garaventa Group is the world quality and technology leader in ropeway engineering. The degree project goal was to develop a new shaping of a surface lift. There are two kinds of surface lifts, platter and T-bars. The two kinds of surface lifts have some variation in design but only minor differences.