The company Sol & Energiteknik wanted to examine the possibility to make a standardhouse totally energy independent. Based upon this I have, during the spring of 2007,examined the possibilities available at the market today through litterature studies, contactwith several companies and reading reports at the internet.The first thing to examine has been to determine the energy consumption for a standardhouse, and find out if there are better technologies to be used for energy conservation.My conclusion in this matter is that there are possibilities today for building a house moreenergy efficient.When I had reached the point at which my design for the house was decided, I also hadto choose the different products to use to produce energy as well as to store that energy.To produce heat and electricity to the house I decided to use a wind turbine and a solarwater heater.The most difficult part of designing a house that is energy independent is that theproduced energy must be stored somehow. Storing the heat is relatively easy beacuse theheat can be stored in a large water tank. The electricity is a bigger problem beacuse itmust be stored in batteries, which today are too expensive to be used in a standard house.In the future producing and storing hydrogen might be used to produce electricity, buttoday that technology is both expensive and not tested enough.My final conclusion is that a standard house can not be built to be totally energyindependent today, unless it is very expensive to connect the house to the electricitynetwork. As an alternative solution I came up with a proposal for a house which isconnected to the electricity network and have some amount of own produced energy.This house prooved to be a good investment if you choose to build it today, and it couldbe a very good investment in the long run beacuse energy prices increase every year..

In the year 2010 a transition will take place here in Sweden from the present rules how to dimension buildings in to the common rules with have been developed in Europe, the Eurocodes. Eurocode is the term for a collection standard that contains calculation rules in how to dimension constructions and buildings. They are developed by the European standardize committee.The purpose with this examination work is to get an insight of what changes this will contribute to, and how it will affect the dimensioning. Are there going to be any differences in the dimension you finally chose?To investigate these possible differences two constructions will be calculated first in the present Swedish rules, and then in the coming eurocodes.One of these two constructions will be build completely in steel, while the other will be build completely in concrete.

BACKGROUND: Chronic Obstructive Pulmonary Disease (COPD) is a slow progressive disease affecting the family caregivers by limiting their lifestyle. Subsequently the situation can be experienced as stressful for both the afflicted and the relatives. To easier understand the needs of the caregivers of family members suffering from COPD have, it is important to get an insight into their experience of every-day life, so that medical staff can help, support and promote their health according to their needs. AIM: To illustrate caregivers? experiences of living with a family member suffering from Chronic Obstructive Pulmonary Disease.

In today?s society climate change has grown to one of the largest global issues. To reduce emissions of greenhouse gases, large changes of the energy system are required. An increasingly popular solution is investments in local production of renewable energy resources like wind, solar or geothermal power. The following report examines the possibility for implementing a solar power plant on the new hospital Nya Karolinska Solna. Two different technologies for extraction of solar energy has been studied, solar thermal collectors  to meet the need of heating and solar cells to satisfy the need for electricity linked to operating the hospital building.

The aim of this project was to look into ten small sewer systems in the municipality of Laholm, in Sweden, in order to work out common assessment grounds for them. The sizes of the systems for purification of wastewater were within the range of 25 to 2000 population equivalents. Our method was to study literature, the laws and regulations applicable and the files at the municipality. The conclusion is that every sewer system is different and every situation is unique. We concluded that based on laws and assessment grounds sewer systems equal in size and pollution load ought to have similar demands attached to them.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

Wind Hanna (2009) Kostdebatten mellan Livsmedelsverket och lågkolhydratkostförespråkare (LCHF). C-uppsats i pedagogik, Institutionen för Pedagogik, Didaktik och Psykologi, Högskolan i Gävle.  Kostdebatten mellan Livsmedelsverket och läkaren Annika Dahlqvist har de senaste två åren fått stort utrymme i media. Syftet med den här uppsatsen är att med inspiration från diskursanalys beskriva och förklara dels Annika Dahlqvists kritik mot Livsmedelsverkets kostråd och hur Livsmedelsverket bemöter kritiken, dels hur parterna framställs i ett urval medieartiklar. Sex artiklar togs fram genom sökning på Google och Livsmedelsverkets hemsida.

AbstractConsequence analysis ?worst case scenario? at Mälarhamnar AB VästeråsDavid DotzskyMälarhamnar AB is a company that handle large amounts of oil, diesel, biofuel and petrol. That result in a lot of work to prevent accidents. The risks with modern technology is very small but it can?t be eliminated.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

Denna rapport behandlar en undersökning av olika lastbalanseringsalgoritmer i Linux Virtual Server. Undersökningen har gjorts i ett webbkluster (Apache var webbservern som användes) med tre heterogena noder, där operativsystemet var den detalj som skiljde dem åt. Operativsystemen som ingick i undersökningen var Windows Server 2008 R2, CentOS 6.2 och FreeBSD 9.0. De faktorer som undersöktes mellan de olika algoritmerna var klustrets genomsnittliga svarstid vid olika belastning och hur många anslutningar som kunde hanteras av klustret, detta gjordes med verktyget httperf.Undersökningen ger svar på hur ett heterogent webbklusters genomsnittligasvarstid och arbetskapacitet kan skilja sig åt beroende på vilken algoritm som används för lastbalansering. Resultatet visar att den genomsnittliga svarstiden håller sig låg tills en hastig stigning inträffar.

AbstractThe aim of this study was to illuminate and collect existing research from the beginning of the 21 st century about nurses work environment in institutional and elderly care in Sweden.A literature review was made by analyzing eleven scientific articles. The result showed mainly information about nurses work load. The information dealt with high work demands, too much responsibility, shortage of staff, time press and stress. Furthermore nurses reported a lack of co-operation between staff and management. An important part in nurses? work was appreciation from colleagues, management, patients and relatives.

AbstractIntroduction: Hand Arm Risk Assessment Method (HARM) is a tool to assess the risks of deve­lo­ping complaints of the arm, neck or shoulders during manual work. The method was developed in the Netherlands primarily for employers, but is also used as an aid to work environment in­spec­tors. The purpose of this study was to evaluate the HARM-method for assessment of biomecha­nical exposure of the upper limbs when performing manual tasks as well as its suitability to be used within work environment inspection. Methods: Ten labour inspectors conducted assessments of five video-recorded work tasks. Assess­ments made with HARM were compared with those made with the Assessment of Re­pe­titive Tasks (ART) tool and with ACGIH Hand Actvity Level (HAL) - both methods for assess­ment of bio­mecha­nical exposure of the upper limbs - and with the model for the assessment of re­pe­titive work in the pro­visions of the Swedish Work Environ­ment Autho­rity on ergonomics for the prevention of mus­culo­skeletal disorders, AFS 1998:1.

The Swedish forestry aims primarily maximize production and economical wins. However, especially urban forests have great qualities as space for recreation and children?s play, which means that other goals should lead the forests management. The Teleborg forest is a wooded area in Växjö, surrounded by urban dwellings, schools, nurseries etc. A great part of the forest was wind felled during the storm Gudrun in 2005 which changed the forest, earlier dominated by spruce, dramatically.

Information overload is by no means a new concept, but has come to prominence the last decade. A generally accepted definition of the phenomenon does not exist. The main question in this master thesis is how to define information overload in order to create a connotative concept for information science. This thesis reviews the nature and causes of information overload, and considers possible solutions, both individual and technical, and their relevance to the information professional. The review of the results shows that researchers seldom or never give a legible definition of what the concept information holds.

Vindkraftverk ansluts idag i snabb takt till elnät runt om i världen. Elnäten är ofta inte tillräckligt dimensionerade på platser där vindkraftutbyggnad är lämplig vilket leder till ett behov av nätförstärkning. Förstärkning sker konventionellt genom att övergå till en högre spänning, något som kan vara förenat med stora kostnader och ledtider. Bland annat därför har en filosofi med beteckningen smarta elnät uppstått, som handlar om hur elnätsystemet ska se ut när det är mer anpassat till de nya energikällornas karaktär och samtidigt medför ett mer effektivt totalutnyttjande. För vindkraftverk kan det då handla om att i högre grad än idag reglera produktionen och understödja nätet, t.ex.