Målet med detta examensarbete, utfört på uppdrag av Vectura Consulting AB, har varit att undersöka möjligheten att ansluta en vindkraftpark till järnvägens kontaktledningsnät. Möjligheten att koppla om vindkraftparken till järnvägens hjälpkraftnät, som bland annat förser växelvärmare och signalsystem med effekt, har också undersökts. Eftersom kontaktledningsnätet och hjälpkraftnätet arbetar med olika frekvenser och spänningar, 16? Hz och 15 kV respektive 50 Hz och 22 kV, måste därför en komplett krets för frekvensomvandling, spänningsomvandling och omkoppling tas fram. Projektet har begränsats till en del av Botniabanan, sträckan Örnsköldsvik-Nordmaling.I denna rapport har trafikfrekvensen på den valda sträckan på Botniabanan undersökts för att bestämma en genererad effekt till inkopplingspunkten, samt för att undersöka när det kan vara lämpligt att koppla om till hjälpkraftnätet.

Målet med detta examensarbete, utfört på uppdrag av Vectura Consulting AB, har varit att undersöka möjligheten att ansluta en vindkraftpark till järnvägens kontaktledningsnät. Möjligheten att koppla om vindkraftparken till järnvägens hjälpkraftnät, som bland annat förser växelvärmare och signalsystem med effekt, har också undersökts. Eftersom kontaktledningsnätet och hjälpkraftnätet arbetar med olika frekvenser och spänningar, 16? Hz och 15 kV respektive 50 Hz och 22 kV, måste därför en komplett krets för frekvensomvandling, spänningsomvandling och omkoppling tas fram. Projektet har begränsats till en del av Botniabanan, sträckan Örnsköldsvik-Nordmaling.I denna rapport har trafikfrekvensen på den valda sträckan på Botniabanan undersökts för att bestämma en genererad effekt till inkopplingspunkten, samt för att undersöka när det kan vara lämpligt att koppla om till hjälpkraftnätet.

During the transportation of logging residues (LR) the material´s low density is a problem that results in low use of pay-load capacity. Comminution or compression of LR are possible methods to increase pay-loads. In the present thesis studied a bundling machine which was mounted on a truck chassis, and the subsequent transport and crushing. The truck bundler created bundles that were larger and longer than other bundling equipment on the market. The objectives were to determine the total time consumption and its allocation over work element and machinery, to measure dry matter (DM) content of green and brown LR-bundles.

The aim of this study was to evaluate the effects on a simulated wastewater plant regarding GHG emissions and use of energy and resources when implementing source separated wastewater systems. The effects were studied for different restrictions of effluent quality and for different temperatures on the influent. The simulation model BSM2G calibrated for Käppala wastewater treatment plant was used. The task was executed by simulating nine different scenarios with an increase in influent load from new connections equivalent to 3, 10 and 30 % of the present connections. These new connections were served by conventional, urine separated or black water separated systems.

The storm Gudrun in 2005 led to massive windthow damage in forests in southern Sweden. Since then there has been a growing interest in factors influencing wind damage in above all Norway spruce (Picea Abies) stands. Although many other interesting areas still need to be examined. In 2005 there where a lot of stands that suffered different degrees of damage, a lot of these stands weren?t cut, but instead left to grow. The future development of these stands is uncertain and the guidelines are unclear.

The fishing port of Bläsinge is located on the east coast of Öland, Sweden?s second largest island. Today the port has a limited supply of freshwater. The economic association of the fishing port wants to expand their business, so that they will also include tourist services. To do this the harbor will need a more independant source of freshwater, with a higher quality than the present well.

This study investigates and describes the phenomenon of ?technical tourism?, in the case ofwind power plants in Sweden. The main purpose of the study is a greater understanding ofa field which to date has remained largely uncharted.Technical tourism is a type of visits to a production site, where the technical aspect ofthe production is the main focal point for the visitor. The definition of technical tourism isbased on concepts within ?Industrial tourism?.

ABB is one of the world?s leading engineering companies in power and automation technologiesand their solutions improve performance while lowering environmental impacts for energycompanies and industries. ABB FACTS designs equipment and plants for series and phasecompensation.This thesis has been performed at ABB FACTS on the Mechanical Design (DM) department inVästerås, Sweden. The purpose of the thesis was to develop and design calculations andsimulation tools for ABB FACTS?s standard series capacitor platforms.

This project was started within the Market-Design programme of Elforsk, with the aim of developing representative test systems of Swedish distribution networks. Using such test systems as a basis for reliability and customer interruption cost calculations makes it feasible to analyse the network tariff regulation of Swedish power  istribution companies. In particular, it enables studies of the incentives for companies to invest in system reliability. Until now, the available test systems are either not representative of Swedish conditions, or too small in scale and limited in function.Within this project we have created two test systems. In order to represent the diversity of actual Swedish distribution networks, we have created one test system for urban environments and another for rural environments.

The Swedish energy company Vattenfall is currently the owner of the district heatingsystems in Nyköping and Motala. To be able to also offer cooling solutions tocustomers are becoming more and more important. This report describes the resultsof an investigation of the cooling market in the two cities and the potential needs forcooling today and in the coming 20 years. The total potential for the coming 20 yearsis estimated to be roughly 17 MW for Nyköping and 9 MW for Motala.Two possible district cooling systems for each of the two city centers was modeledand a comparison was made between different cooling techniques namely absorptionand compressor chillers.Absorption chillers driven with district heating during the summer is one way ofincreasing the load in a combined heat and power plant and thereby the possibleelectricity generation. The cost of heat production must be low for absorption chillerto be able to compete as an alternative.

The governing set of regulations for structural engineering in Sweden used to be Boverket, BKR. However in the beginning of the 21st century a changeover to new regulations, the Eurocodes, started.The transition was completed in year 2011 when the Eurocodes became the mandatory design work policy for all countries within the European Union. The Eurocodes were implemented to simplify and remove potential barriers to trade that may exist when countries have different design rules.  Since the changeover it has been important for all construction companies to update their knowledge base and their design software.When comparing the two calculation processes they seem similar, but there are a couple of differences worth noting.  With the new regulations, engineers will find that the process when designing joints in timber structures has changed.  What used to be a fairly easy and straight forward calculation procedure has now become tedious and time consuming.The objective of this degree project is to present a product, a dimensioning tool that will help structural engineers when computing lateral load carrying joints in timber structures.The degree project is made up of two parts where the first part is the written report describing the background and theory behind load carrying computations. The second part of the project is the actual dimensioning tool which includes several worksheets in Microsoft Excel. The program treats single and double shear connections of the following:Nail jointsScrew jointsSteel plates (thick and thin types) The user can edit the following parameters:Type of plate/ number of shearsStrength class of timber membersMember and plate sizeType of fastenerDiameter of fastenerLength of fastenerYield moment of fastenerkmod and partial factors for design load carrying capacityThe dimensioning tool was created and developed in collaboration with structural engineers at the company Byggteknik AB.

In inhalation anesthesia life-support systems are used to provide gases to the patient and to monitor important parameters. These systems are used in dynamic and stressful situations where the information-load on the operators often is significant. This thesis presents a design concept of an anesthetic system. The design goal has been to keep the information-load on the operator low with the objective to minimize confusion and error.A number of contextual inquiries were made in the operating room during surgery at four hospitals in Sweden. The goal was to understand the actual use-situations when anesthetic systems are employed.

This thesis raises the problem with acid mine drainage around the closed mine Finngruvan.The purpose of the investigation was to compare metal content in surface water in the areaand its catchments between year 2010 and 2003, also to make calculation of specific runoffand metal load, furthermore determine the recipients in the area. Surface water samplingwhere preformed at the same place as 2003 and also at a few other places of interest. Adigital elevation file were used in GIS to calculate the area of the watersheds in the region,observations in the field where also made. The collected data were used to make comparisons,calculations and conclusions. The result showed that the surface water 2010 had somewhatlower metal concentrations.

GE Healthcare operates in Uppsala (Sweden) and develops systems, equipments and medium to purify medical substances. Discussions with the local authority concerning planed far-reaching changes and upgrades of the biological process techniques for sewage management, aroused the question about revising the terms of permit for the activity. Therefore it seemed necessary to evaluate a newly installed biological process technique, which is the background of this thesis. The evaluated biological treatment process was built in 2003 and consists of a biological reactor filled with moving bed carriers with a high surface area for biological growth. At the time of the project the biological wastewater treatment plant consisted of a flow equalization facility and two following parallel biological processes; a biological reactor with moving bed carriers and a tower trickling filter.The aim of this thesis was to survey the function of the biological reactor with respect to the reduction of organic matter.

The housing sector uses 40 % of the energy in Sweden and half of the electricity usage. Theuse of energy is the main reason to the increasing rate of carbon dioxide in the atmosphere.This is the main motive but also a wish of higher safety, that is a higher rate of selfsufficientenergy production in Sweden, we want to decrease the need of using fossil fuel. Now whenthe energy price rise, the interest in energy issues increase and more people discuss thepossibility of reducing the usage of fossil fuel. A change to renewable energy such as sun,wind and water is the only solution where we can get a sustainable development.One way to contribute to a better use of energy is to build in the principle of passive house.The house is being built with a thick and tight insulation. If you use a heat-exchanger withhigh degree of efficiency and a final heating battery on the ventilation system, the heat fromlamps, devices and the ones living in the house should be enough to fulfil the criteria ofliving.