Background. Anesthetic-related death in small animal anesthesia is about ten times more common than in human anesthesia. Recent research identifies the early postoperative period as particularly risky and highlights the need for regular and careful monitoring of the veterinary patient during this period. Objective. The aims of this study were to investigate whether there are standard procedures in terms of regulated routine patient observations and record-keeping during the early postoperative period at Swedish veterinary clinics, and if there are any guidelines for monitoring the veterinary patient during recovery. Methods. A small survey including ten Swedish veterinary clinics was carried out as well as a literature review. Results.

Background: The Swedish population is aging [1] and malnutrition is a common problem among elderly people [2]. A method called food registration is used to monitor the patients? nutritional intake, with the purpose of reducing the risk of patients deteriorating in nutritional status during hospitalisation. However, the current method is not satisfactory and many food registration lists are incomplete. [3-6] Thus, patients do not receive a qualitative nutritional care since the assessment of the patients? nutritional status is based on incomplete documentation.Purpose: The purpose of this master thesis is to increase the quality in the nutrition monitoring process in the geriatric units B72 and B74 at Karolinska University Hospital in Huddinge, Sweden.

The aim of this report is to develop an improved basis for calculation of common costs as well as to create a support, showing which steps can be taken for improving the future monitoring at NCC Hus in Karlstad.The objective of this report is to improve the quality of the process of quoting by verifying current key numbers, production of new key numbers and to identify the problems affecting the monitoring of projects.The objective is also to provide suggestions of actions improving quality assurance at NCC Hus in Karlstad..

The thesis that follows is performed in collaboration with Nitator in Oskarström.The factory in Oskarström focuses on laser cutting, robotic welding and surfacetreatment of steel for the automotive industry.The project aims to streamline the flow of materials in production by automatingthe movements of the forklifts, running to and from the interlayer, and betweenworkstations.The project started with a systematic literature search. The literature searchshowed the research position around the AGV-system. Also a review of studentliterature was made, so that a suitable method for practical implementation couldbe developed and applied. Selected method uses both quantitative and qualitativeapproaches, which is analyzed by using triangulation.The work has resulted in a modified layout of the current facility in Oskarströmthat can be used for the implementation of the AGV-system. It has also resulted inthe tender documents and profitability calculation from several of AGV-suppliers..

The work was carried out on Termisk Systemteknisk?s office in Linköping. The aim was to create a computer system with infrared camera technology for quality control and temperature monitoring of manufacturing processes in industry. The system should be configurable such that it can be used on several different issues, including those where the real-time analysis of camera images is required.The developed system is based on an existing framework, Panola, to deal with measurement results and images in a database. The framework is built for the system continually check for new data , and the task was to create a foundation upon which to build systems that use the framework, but fully or partially utilize direct calls .

Syftet med studien var att undersöka om det fanns någon samvariation mellan föräldrar som hade tillåtande attityder samt låg monitoring(föräldrars bristande tillsyn över sina ungdomar) och riskbeteende i alkohol, tobak, narkotika och/eller spel hos deras ungdomar, samt att studera eventuella könsskillnader. Studien gjordes i samarbete med Samhällsmedicin vid Landstinget Gävleborg. Metoden som användes var en kvantitativ och studien grundades på datamaterial på 1735 ungdomar från Centralförbundet för alkohol- och narkotikaupplysningens (CAN) totalundersökning som hade genomförts bland eleverna i årskurs nio i Gävleborgs län i år 2008. Eventuell samvariation undersöktes med hjälp av korstabeller och det beräknade 95 procents konfidensintervall. Resultatet visade att ungdomar till föräldrar med tillåtande attityder och låg monitoring hade ett riskbeteende i alkohol, tobak, narkotika och spel i större utsträckning jämfört med ungdomar som inte hade detta, där föräldramonitoring var den mest betydelsefulla påverkansfaktorn för ungdomars substansbruk.

During year 2004 Ålö AB made significant change in their production process. The production of front loaders is nowadays highly automated with short operation times. To be able to control their process in a better way Ålö recently decided that they needed a tool for simulation of their production and to shift patterns. This final thesis started with a pilot study in Ålö?s factory in Brännland.

The purpose of this report is to make an evaluation of the self-monitoring for scarification which Stora Enso is using and this study deals with the effects and importance of scarification. A comparison is made in this study with the purpose to highlight any differences between some of the leading forestry companies and significant forest organizations in Sweden. The companies represented in this report are Korsnäs, Mellanskog, SCA, Sveaskog and Södra. In the beginning of this study an interview form was set up together with Daniel Forsberg at Stora Enso. Stora Enso is the head object of this report and seven interviews were made within that company. At the other companies only three interviews were made within each one, with an exception to Mellanskog who wished four.

The purpose of this report is to make an evaluation of the self-monitoring for scarification which Stora Enso is using and this study deals with the effects and importance of scarification. A comparison is made in this study with the purpose to highlight any differences between some of the leading forestry companies and significant forest organizations in Sweden. The companies represented in this report are Korsnäs, Mellanskog, SCA, Sveaskog and Södra. In the beginning of this study an interview form was set up together with Daniel Forsberg at Stora Enso. Stora Enso is the head object of this report and seven interviews were made within that company. At the other companies only three interviews were made within each one, with an exception to Mellanskog who wished four.

This M.Sc. thesis is a material application evaluation commissioned by the advanced body engineering department at SAAB Automobile AB. The purpose of the thesis is to evaluate implementation of the innovative sandwich design material Hybrix into an automobile body. Today the most commonly material used in the body is galvanized steel sheets and by shifting material to Hybrix several problematic issues have to be dealt with. Hybrix is an innovative sandwich sheet that inherits thin stainless steel face sheets and a stainless steel fibrous core.

This study's primary purpose was monitoring of conservancy operation measures. The fixed sections within ekopark Storklinten owned by the forest company Sveaskog. These measures are performed with the purpose of creating and maintaining hardwood forest and mimic natural processes. The sections were divided into different categories depending on the type of measures they were exposed with. The monitoring showed that the purpose of these measures was fulfilled in general.

Welding is a common method for joining of metal or plastic construction parts. This report describes several different weld methods in general terms. The report focuses on the GMAW method, specifically MAG welding.A case study has also been performed for the company Wenmec. The task received from the company was to compare the mechanical properties of joints welded with the tube electrode called Nittetsu SM-3A and joints welded with the homogenous electrode called ESAB Aristorod 12.63. Both types of weld joint were welded with the MAG method with an Argon based shielding gas with 18% CO2.

Rapporten beskriver arbetet och resultaten av en jämförelse mellan Sensu och op5 Monitor, vilka är verktyg som används för att övervaka enheter i nätverk, så kallade network monitoring systems. Arbetet har utförts för att utbudet av nätverksövervakningsverktyg ständigt växer och det ansågs värdefullt att jämföra en ny aktör med ett äldre verktyg som är byggd på ett annat tankesätt. Det som ansågs intressant att testa var hur dessa verktyg hanterade de rapporter som skapades och samlades in, om det slutgiltiga resultatet från detta skulle skilja sig åt eller inte. För att testa detta sattes en virtuell testmiljö upp, där Sensu och op5 Monitor rullade parallellt med varandra och övervakade samma system och använde sig utav samma plugin för övervakningen. Experimenten utfördes på två stycken tjänster, BIND9 samt Apache2, i och med att de två pluginen som användes var uppbyggda på olika sätt konstruerades även olika experiment.

Under början av 1990-talet inledde Volvo Personvagnar i Olofström en process där övervakning av robotiserad MIG/MAG-svetsning var i fokus. Det ledde fram till ett forskningsprojekt som resulterade i att Stefan Adolfsson, Lunds tekniska högskola/Blekinge tekniska högskola, 1998 presenterade avhandlingen Automatic Quality Monitoring in GMA Welding using Signal Processing Methods [5]. I den presenterades ett SPRT-baserat övervakningskoncept för övervakning av MIG/MAG-svetsning med kort- och spraybåge. För att få fram ett kostnadseffektivt övervakningssystem uppkom tanken att använda vanliga PC-datorer som plattform. De erbjuder hög beräkningskapacitet till förhållandevis låg kostnad.

Under början av 1990-talet inledde Volvo Personvagnar i Olofström en process där övervakning av robotiserad MIG/MAG-svetsning var i fokus. Det ledde fram till ett forskningsprojekt som resulterade i att Stefan Adolfsson, Lunds tekniska högskola/Blekinge tekniska högskola, 1998 presenterade avhandlingen Automatic Quality Monitoring in GMA Welding using Signal Processing Methods [5]. I den presenterades ett SPRT-baserat övervakningskoncept för övervakning av MIG/MAG-svetsning med kort- och spraybåge. För att få fram ett kostnadseffektivt övervakningssystem uppkom tanken att använda vanliga PC-datorer som plattform. De erbjuder hög beräkningskapacitet till förhållandevis låg kostnad.