Sök:

Sökresultat:

128 Uppsatser om Weld flaws - Sida 6 av 9

Lärmiljö, frizon eller sysselsättningsarena? : En kritisk analys av fritidshemmet i en era av new public management

In 2014, the Swedish leisure-time centres after school became widely criticized on several occasions by school authorities. The cause for its criticism was a reflection of leisure time-centres with lots of untrained staff and a lack of pedagogical aspirations. The conclusion of the criticism was that these leisure-time centres do not fulfil their potential. However, these assessments has only to a limited extent become a part of the public educational discourse in Sweden. This discourse has mainly focused on the decreasing results in the Swedish school, which has caught the attention in the media and ended up on the political agenda.

Teststrategier och användning av testautomation : En studie utförd på företaget Extenda AB

In today?s IT world where software is constructed in a rapid pace, testing has become a crucial area to master when testing has to be done at a greater speed. To still be able to handle the demands of high quality software, companies have to spend more resources on testing and introduce test automation. By automating test cases the testers can gain time which they can spend on doing more complex testing and thereby increase the quality of the software.In this thesis we have helped Extenda AB, who delivers systems to retail companies, to introduce test automation in one of their customer specific projects. This has been done using their own in-house ?capture/replay? tool ECP (Extenda Cashier Player).We have also derived a process that explains how Extenda can introduce test automation on other customer projects.

Internpriser i praktiken: - en fallstudie

This paper presents a study of the Swedish public service television broadcaster - Sveriges Televisions (SVT) transfer pricing model. The aim of the thesis is to examine the motives for using transfer pricing from a theoretical perspective and if SVT?s transfer pricing model fulfils these motives. We will also examine any potential managerial problems the existing transfer-pricing model might cause and discuss how these could be solved. We have in our study found that the main motive for using transfer pricing within SVT is to allocate internal resources as efficiently as possible.

Den särskilda kvinnan: En feministisk analys av Universella decimalklassifikationen

The aim of this thesis is to, from a feminist point of view, analyse the Universal Decimal Classification UDC, which is an international and widely used classification system. A number of the larger classification systems and subject heading lists have during the last decades been placed in the limelight of various gender studies and the systems treatment of women has been criticized. With this examination of the UDC, I dont merely wish to identify shortcomings and advantages with the UDCs way to treat men and women. The UDC is also used as an example of how the gender problem can be identified and interpretated in classification systems generally. My analysis is performed with a theoretical foundation in feminist science theories about knowledge and norms, together with a linguistic perspective on valuing and emotionally tinged language.

Svensk kod för bolagsstyrning : Efterlevnad och tillämpning ur ett oberoende perspektiv

Purpose: The purpose of this study is to present an overview of the Swedish listed companies and their compliance with the Code and its normative rules for independent decision-making. Methodology: The authors have read and delved into the Swedish Code of Corporate Governance. The authors have chosen to study the enforcement of the code based on independent bracing guidelines. The study was conducted through a combined quantitative and qualitative approach. The study is based on primary data collected in the form of companies' corporate governance reports, which have been supplemented by structured interviews.Frame of reference: Swedish ownership structure and concentrated ownership, self regulation and normative guidelines, institutional theory and earlier research on this topic.Empirical foundations: A comparison of the selected companies has been based on the independence rules of the Swedish Code of Corporate Governance. A specific company has been presented with the company's application of the code, interviews have also been done with this company to increase the understanding of the empirical basis further.Conclusions: There are several flaws with the code and how it is applied today.

SYNS VI I SVERIGE? : En rättssäkerhetsstudie om barn i migrationsprocessen

The current thesis is on the rule of law and how the principles of the rule of law are met in thenew Swedish migration process. The migration process has been subjected to criticism duringseveral years and on different occasions. The migrations process is viewed through a ?rightsof the child? perspective, foremost to seek if the rights of the child are met. The children are avulnerable group, not the least in the process of migration.

Energikrav i upphandling av bygg- och anläggningsprojekt

The building and plant sectors represent a large part of Sweden?s energy use. Putting energy requirements in public procurement as a tool for reducing energy consumption in the building and plant sectors is therefor an opportunity that operators can take advantage of. The aim of this thesis was to map the energy requirements in procurement that operators in the public sector use today in building and plant projects. The analysis was made with respect to if the energy requirements corresponded to the parts with large energy use in building and plant projects and also in which way energy requirements in procurement are written in the contract.

En jämförelse mellan vakuumisolering och traditionell isolering

The purpose of this thesis is to investigate if vacuum insulation panels are a competitive alternative to traditional insulation.Vacuum insulation has been used as insulation in buildings in Germany and Switzerland for a few years. In Sweden the high-performance insulation material is mainly used in refrigerators, freezers and vacuum thermoses. The development is proceeding well and vacuum insulation is becoming more common in the construction industry. Since it is a relatively unexplored material on the market there are many flaws and problems with the material.The questions we have chosen to answer in this report include an increased knowledge of vacuum insulation, various problems that may arise when handling/installation and the pros and cons of vacuum insulation compared to standard traditional insulation.The methods we have chosen to use in this report is a literature study, interviews with various suppliers and manufactures and calculations to show the differences between traditional and vacuum insulation. Vacuum insulation is 5-10 times better insulation than standard traditional mineral wool insulation, mainly at the beginning of its lifetime.Vacuum insulation panels (VIP) have a service life of approximately 50 years, whereas traditional insulation has a service life of approximately 100 years.

Processutveckling av borstgradning

During the milling of Sandvik Coromant?s world leading Drill with replaceable inserts,the CoroDrill880©, burrs appear around the milled surfaces. The burrs are removedusing different methods, one of which is deburring with special brushing machines thatare integrated into milling cells. The machines of the type Sinjet, use a Siemensguidance system. The deburring results are not satisfying and manual deburring isrequired afterwards.

Medborgarinflytande i detaljprocessen : En jämförelse mellan PBL 1987 samt PBL 2010 ur ett demokratiperspektiv

In the year 2002 a commission wasappointed by the government and taskedto clear up possible flaws in the lawgoverning spatial planning (Plan ochbygglagen, PBL). The commission's reportlaid the foundations for a new law whichwas adopted by the Swedish parliament onthe 20th of June 2010 and is scheduledto come into effect on the 2nd of May2011.The purpose of this thesis has been toexamine the changes made in the new law,primarily from a civil-rights point ofview, focusing on the appeal process.This is a highly interesting subjectconsidering one reason behind the newlaw was to simplify and streamline theplanning process while keeping civilrights intact.Through a comprehensive literature studyand interviews with experts the currentplanning process was mapped out andrelevant changes in the new law wereexamined. After the study had beenconcluded we were able to distinguishseveral areas that underwent especiallyinteresting changes;The requirement of a plan program wasremoved and the exhibition process wasremoved and replaced by a writtenreview. Individuals were given thepossibility of requesting a plan notice.The different spatial plan documentswere merged into one single document andthe number of responsible authoritiesfor spatial plans is no longer limitedto one.The study has shown that the aspirationfor a more effective spatial planningprocess has mostly been conducted at theexpense of individual rights.The single biggest obstacle forachieving a democratic planning processis learning how the law works and howthe spatial planning process isimplemented, this is has been proven tobe a very hard and time consuming taskfor individuals to undertake..

Designkoncept av ?toycam? : Framtagning av koncept för analog kamera

Analogue photography is something that many thought died out in the beginning of the 21?st century as a result of the digital revolution. But that?s not the case. As the digital revolution swept over the world a movement of analogue cameras, and so called toycams grew bigger.

Utvärdering av en FPGA för rymdbruk

A new FPGA suitable for space applications has just reached the market. To investigate whether there are any possible flaws or limitations similar to those previously seen on FPGAs, an evaluation has to be done. This master thesis contains the evaluation of this new radhard FPGA with focus on possible design limitations and package related electrical phenomena.Areas evaluated: Ground-/VDD bounce, Cross talk, Rise time sensitivit, Power cycling, Power consumption, Place and route tool, Radiation hardnessThis report contains all steps in the evaluation. From method to measurements, comparisons, theory, results and conclusions. In the evaluation work, special effort has been made to develop designs that really stress the FPGA to find potential problems.

Förbättring av Camcoil : Integrering av stöd samt bandnyp

AbstractThe assignment were assigned by Camatec Industriteknik AB. Camatec is a Karlstadlocated consulting company, they make everything from pilot studies to complete projects in mechanical design and calculation. They even have their own patented product, Camcoil. It is a winder for steel strips and is used for example with hardening of the steel strip. The assignment has been to solve the problems encountered by some customers within this product.

Psykiatriambulans Akut prehospital psykiatrisk vård

Bakgrund: Specialistsjuksköterskan ska uppta patientberättelsen och utifrån sinspecialiserade kunskap om medicinska eller psykiatriska tillstånd göra en korrekt bedömning.Sjuksköterskan ska från sin bedömning sedan förse patienterna med adekvata vårdåtgärder. IGöteborg har andelen ambulansuppdrag som klassificeras som psykiatrisk sjukdom ökat desista åren. Med anledning av det planerar ambulanssjukvården i Göteborg en speciellpsykiatriambulans med dubbelkompetens, en sjuksköterska som har specialistkunskap inompsykiatri samt en ambulanssjuksköterska. I Stockholm skall en psykiatriambulans införas 1april 2015 men inte med dubbelkompetens. Anledningarna till planen att introducera enpsykiatriambulans är att utveckla den akuta prehospitala vården bland annat genom att hjälpapatienter med psykiatrisk problematik till rätt vårdnivå.

Det tror jag är väldigt stort och viktigt - praktiken... : En kvalitativ undersökning där tre omsorgsassistenter får beskriva sina uppfattningar från omvårdnadsutbildningen och deras första år i yrket.

AbstractThis essay is an investigation where I try to gain an increased knowledge of the three assistants? (in the mentally disability profession) opinion about their education and their first years in their profession. I have also tried to answer the questions whether the course mentally disability/functional gives the students a good start in their profession, if there are any flaws or if something is missing in the course or if they can think of any improvements to make the course better.This investigation is performed as a qualitative interview study where three women were interviewed about their education and their first years as assistants? (in the mentally disability profession). All the interviewed women have been working in the care activity for two or three years since they graduated.

<- Föregående sida 6 Nästa sida ->