Background: Obesity surgery is the only technique that has proved to have a long-lasting effect on weight loss. Operation is not a solution but rather a lifelong involvement for the person. To loose a lot of weight means a big adjustment for both body and mind and the operated person may need support, advice, information and encouragement. Aim: The aim was to describe how a person, operated for obesity, can be supported in order to reach improved health pre- and postoperative. Method: A systematic literature study was made which resulted in 18 scientific articles that have been reviewed.

This paper aims to describe the variation and develop a method to control the production for the product Metropol Kaktus from the snuff developer Fiedler & Lundgren. We are going to use the requirements from the product specifications as limits of the expected quality when we present methods to control the process. One method attempts to control during the process and the other attempts to maximize the number of products with strived quality before the process starts. Metropol Kaktus is a product produced with high quality, the mean weight is 20,023 gram and this is very close to the weight, 20 gram, which is reported in the product specifications. The variation in weight variable is less than what is reported in the specifications and the minimum weight is over the limit set by Livsmedelsverket.

The Income Tax Act is enacted what criteria must be met to obtain a tax reduction of household work. Household work is the common term for ROT- and RUT-works. The purpose of the tax reduction is to increase job opportunities and to discourage that undocumented work performs.It is only for the labor cost as tax reduction is given for. The concept of labor cost is defined in law as it is not comprised of cost of materials, equipment or travel. The preliminary work provides no closer explanation what the labor cost includes.

GE Healthcare operates in Uppsala (Sweden) and develops systems, equipments and medium to purify medical substances. Discussions with the local authority concerning planed far-reaching changes and upgrades of the biological process techniques for sewage management, aroused the question about revising the terms of permit for the activity. Therefore it seemed necessary to evaluate a newly installed biological process technique, which is the background of this thesis. The evaluated biological treatment process was built in 2003 and consists of a biological reactor filled with moving bed carriers with a high surface area for biological growth. At the time of the project the biological wastewater treatment plant consisted of a flow equalization facility and two following parallel biological processes; a biological reactor with moving bed carriers and a tower trickling filter.The aim of this thesis was to survey the function of the biological reactor with respect to the reduction of organic matter.

In 2007 the Swedish government appointed a commission of inquiry with the task to submit a proposal of reduction in the requirement of a minimum legal capital for private limited liability companies. The commission of inquiry?s main proposal involved a reduction to SEK 50,000 compared to the prevailing SEK 100,000. Following a complementary proposal from the Justice Department suggesting a reduction to SEK 1, this paper aims at providing an understanding of the function and purpose of a minimum legal capital and the consequences that follows from an abolition of the statutory capital requirement. The thesis concludes that the legal capital?s main purpose is that of a standard contract internalizing the shareholder?s risk in business.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

Stump wood was used between 1850 and 1950 for production of tar and as firewood. In the 1950s the use decreased because of the introduction of the cheap fossil oil. In the 1970s stump wood became an interesting issue again as a raw material for the pulp industry. Stump lifting has today become a possible source for bioenergy. The objectives with this study were to investigate the productivity of stump lifting and stump extraction, and to analyse the economy.

As trucks are getting more and more advanced, information about their weight has become a key factor for controlling them in a more fuel efficient and safe manner. Knowing the mass of a heavy duty vehicle in real time has been a difficult challenge for the truck manufacturers. With the processing power for electronic control units in trucks steadily increasing, more advanced algorithms for calculating the mass has been developed, but at the moment there still is a wish for better performance.Since there is a lack of good information regarding the external forces acting on the vehicle, forces that depends on the slope of the road, foundation of the road and the wind, the methods have to be able to disregard these. Such an approach, based on an indirect least square solution, has been evaluated in this thesis. The results have been promising and based on these a recommendation about further evaluation has been made..

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

Bachelor thesis, Trolley Innovation Project, has been unique in the sense that it has been carried out over the borders of Sweden. Iacobucci S.p.A, located outside of Rome in Italy is one of the largest manufacturers of interior equipment for aircraft in the world. With approximately 30% of the market Iacobucci S.p.A is one of the world's largest manufacturers of catering trolleys.The aim has been to produce a new competitive catering trolley for the airline industry. With customers and users in focus, the project team found that weight, ease of use, ergonomics and design were important aspects. Having a low weight of all the interior is particularly important when there is lots of money for the airlines to save in reduced fuel costs.

This thesis describes how a cost reduction project was done on the Packsize ondemand packing machine EM7. The cost reduction was achieved by making minorredesigns of the EM7.The project began by studying the EM7´s structure and function by working on itsassembly line. A short literature study on the subject Design for Manufacturing wasalso done.By working on the assembly line and by speaking with staff from production anddevelopment departments, a number of ideas for reducing manufacturing costs arose.Estimations of the potential cost reduction size for each proposal were done incollaboration with vendors and the purchasing department. Based on the size of the cost reduction, technical risk, impact on the assembly lineand the development time the various proposals were ranked. The two highestranked proposals were selected for further development towards finished solutions.One of the ideas that were selected to develop in to a finished solution meant thatsome of the pneumatic valves were replaced with others.

A water treatment unit consisting of two aeration basins, two settling tanks, a residence basinand a horizontal subsurface flow wetland were used to treat wastewater from an eggprocessing factory in Brazil. The aim of this paper was to determine the efficiency of thesystem in reducing nitrogen, phosphorus, BOD5 and TSS (among other parameters) andgetting a further understanding on different kinds of constructed treatment wetlands as well astheir nitrogen and phosphorus removal processes. The wastewater from the factory consistedof process water from manufacturing and water used for cleaning, no stormwater or sewagewater entered the system. Tests were taken three times a month from October 2013 ?til April2014.

When beef calves are weaned abruptly at 5 to 6 months of age this triggers a strong stress reaction, since the animals have not yet untied the bonds to their mothers or stopped suckling. This is displayed as extensive vocalization and restlessness. Attempts to diminish the negative effects of weaning on sucking calves have been showing varying results. The study presented here emanates from the observation that when calves are weaned without human interference they are only prevented from suckling, but are still allowed to have social contacts with their mothers. The hypothesis was that calves weaned in two steps would be calmer, gain more weight, and be healthier than animals that were abruptly weaned. To investigate this, 15 calves where weaned in two stages (Group 2), by fitting the calves with nose tags that prevented them from suckling during 5 days prior to the separation of the cows and calves.

Syfte: Syftet med vår uppsats är att belysa den etiska dimensionen av harm reductionanknuten missbrukarvård. Till vår hjälp har vi haft etiska teorier och sociologen Zygmunt Baumans begrepp. Frågeställningar: Vi har använt oss av två huvudfrågor som vi därunder bryter ner i konkreta frågor. 1 Hur ser de etiska resonemangen ut hos personal verksam inom harm reductionanknuten missbrukarvård?Vilken typ av etik använder de sig av? Har de centrala etiska principer, vilka? Hur ser de på etik och moral? Följer de etiskt formulerade regler? Hur ser de på prohibition? Hur ser de på drogbruk? Hur ser de på människan? Vad driver dem i deras arbete? Hur ser de på harm reductions påverkan på samhället?2 Hur kan man förstå harm reductionmetoders framväxt ur Baumans sociologiska perspektiv?Hur kan harm reductionmetoder kopplas till det senmoderna samhället? Hur kan harm reduction rättfärdigas etiskt utifrån ett sociologiskt perspektiv? Hur kan harm reductions förklarar sociologiskt? Vilka förutsättningar fanns för att harm reduction skulle kunna utvecklas? Hur kan Baumans begrepp förklara harm reductions ställning i det senmoderna samhället? Metod: Vi har använt oss av en kvalitativ metod med intervjuer som redskap.

Twenty-four calves, which had not grazed previously, were divided into four groups. They were subsequently inoculated orally with either E. alabamensis oocysts, O.ostertagi/C. oncophora larvae, or both. One group remained uninfected and was used as a control.