The study is quantitative and is about working men and women?s view of male and female leadership. The intention of the study is to see if the men and women have a different perception of male and female leadership and also if they have different personality types. The method used was a survey where the sample is 80 participants, 31 men and 49 women from four different companies. Previous research shows that the perception of male and female leadership can be different, and that the reason can be prejudices and beliefs.

The project in question is a joint effort between students at Karlstad University and Marcus Norström at the company Hovercraft solutions. The project is divided into two parts, one focusing on the purely technical aspects of engineering the product and one focusing on the design aspects of the product development. The project described in this report is the design of the product. The assignment from Hovercraft solutions is regarding design engineering of a cabin for the hovercraft 380TD from the manufacturer Griffon hovercraft. The product lacks a cabin and none is offered from Griffon at the time being. 380TD is a relatively small hovercraft with a length of 6.8 metres and a width of 3.8 metres.The surface available for the cabin is not much different from the body of a car.Because of this, research has been focused primarily on car bodies.The product development process used in the project is following a systematic approach.From a chosen concept, the project was finalized with a CAD-modell as well as a detailed prototype.The weight target of 80 kg was reached and the ergonomic aspects were considered developing the sight field, roof- and entrance height.    .

Physical activity is required for a good health and science shows a clear connection between exercise and a lower risk for disease. Still, the physical activity among the population is far from good. It is the individuals own responsibility to exercise, but the society also has a responsibility to give opportunities to exercise for the population. The aim with the study was to investigate what motivated the group of physical active people to use the Central hospital in Kristianstad?s health program.

The concerning issue of declining number of hunters in North America is also apparent in Europe and Sweden. When the bulk of research found on human dimensions and hunting participation has almost exclusively been done in the United States, this report seeks to add to the needed knowledge on a national level focusing on the causes of hunter declines related to social factors within Sweden. Using hunter data reaching from commune, county to National level, this report describes the correlation between a number of variables and the hunting participation in Sweden.The typical Swedish hunter lives in an area with low population density, the person usually has higher education, the living situation is stable with no recent moving and there is relatively good access to forest land. Persons with weaker connection to the Swedish culture such as foreign citizens, people with foreign background and people born outside ?the Nordic countries? are less likely to start hunt or participate in hunting.A strong relationship was found between the favorite game, moose (Alces alces), and the amount of hunters participating in the hunting.

A discussion regarding the alignment and measuring procedure of propeller shafts has arose due to the competing situation in the industry, and higher standards from the customers. An estimation of the deflection of shafts in different alignment situations has been made with help of FEM-analysis and beam theory. This has been analyzed and compared with the experience from Rolls-Royce AB suppliers of shafts. An evaluation of measuring protocols has been made and the result indicates that there is a correlation between the deflection of the shaft and the run out. Results from a measuring test performed by Balino, Spain, verifies this conclusion.

The aim of this study was to examine how Tanzanian HIV-positive women experience their socioeconomic situation. Semistructured interviews were carried out and the number of interviewees was 15. Collected data was analysed according to a qualitative content analysis and resulted in an overarching theme; Struggle for survival and tolerable life. Important in the lives of the informants was the access to economic and social resources. The informants described access to economic resources as important because of the possibilty to support oneself and the possibility of a lower level of physical strain.

Många drabbas av social ångest. Vikt och kroppsuppfattning relaterar till social ångest men sambandet behöver tydliggöras. Syftet med studien var att se hur mycket av variationen i social ångest över tid som kan förklaras av vikt-, och kroppsrelaterade mått, samt undersöka könsskillnader. Studien var longitudinell och baserades på en enkätundersökning vid två insamlingstillfällen med ett års mellanrum (N=361). Resultatet visade att upplevd övervikt, felaktigt upplevd övervikt, kön och kroppsnöjdhet tillsammans förklarade 7 % av variationen i social ångest över tid.

In Sweden, there has been a continuous increase in the volume of housing construction for dairy cattle. Since 2004, the number of new, rebuilt and extended dairy cow houses undergoing preliminary inspection by the authorities has grown. The livestock farms have mostly focused on cow units instead of calf and heifer sheds; which has led to a need for information in this area. The purpose of the study was to improve advisors? knowledge about bovine building construction and function; to enable them to provide more qualified advice to conventional and organic milk producers who sustain larger herds.

Möjligheter att reducera vikten på en hydraulmotor, som tillverkas på Parker Hannifin AB i Trollhättan, har studerats. Målet med arbetet var att ge förslag på hur motorn kan göras lättare för att nå det framtida målet att erbjuda kunder en lättviktsmotor (LWM) lämpad som fläktmotor.För att identifiera komponenterna och deras vikter vägdes alla delar var för sig. Värdena visade att trumhus, lagerhus, axel och lagerpaket stod för ca 75 % av motorns totala vikt. Arbetet koncentrerades därför på att reducera vikten på dessa delar.Flera koncept togs fram med lägre vikt och bibehållen prestanda. Vissa delar kontrollerades mot hållfasthet med handberäkningar och FEM-analyser.

Syftet med studien var att undersöka om och i så fall hur personer som har genomgått viktminskning i grupp upplever att de har påverkats av själva gruppen samt söka få förståelse för själva grupprocessen. Metoden som användes var intervju, där fem personer i åldrarna 32- 48 år ingick, en man och fyra kvinnor. Resultatet som framkom var att gruppen har påverkat personerna på olika sätt, till exempel genom bidragandet av motivation och socialt stöd som för många har underlättat deras resa mot en sundare livsstil. Gruppen hade en större inverkan i de fallen där personerna kände varandra och där det öppnades upp för diskussion och reflektion gruppmedlemmarna sinsemellan, något som också bidrog till lärande. Slutsatsen är alltså; Ja, gruppen har en påverkan, men hur pass stor den påverkan är skiljer sig mellan olika grupper och individerna som befinner sig i dem..

The purpose of this report is to examine various roof structures that can operate in a warehouse with large spans. The building that is examined in the report is currently under construction, and the roof construction has already been selected. The selected roof system will therefore be compared with some other structures and materials that have been possible. The report will evaluate three different frame materials, two insulating barriers and two overlaying materials. Another important part in major construction projects is the roof safety.

This thesis approaches the problem of estimating the arm angles of an industrial robot with flexibilities in joints and links. Due to cost-cutting efforts in the industrial robots industry, weaker components and more cost-effective structures have been introduced which in turn has led to problems with flexibilities, nonlinearities and friction. In order to handle these challenging dynamic problems and achieve high accuracy this study introduces state observers to estimate the tool position.The observers use measurements of the motor angles and an accelerometer and the different evaluated observers are based on an Extended Kalman Filter and a deterministic variant. They have been evaluated in experiments on an industrial robot with two degrees of freedom. The experimental verification shows that the state estimates can be highly accurate for medium frequency motions, ranging from 3-30Hz.

Bakgrund: Övervikt och fetma är en global epidemi. Fetma kan orsakas av arv, miljö och beteendemässiga faktorer. Övervikt kanleda till flera följdsjukdomar. Viktminskning kan ge ökad livskvalité pch psykiskt välbefinnande. Ur ett hälsoekonomiskt perspektiv är det av vikt att det hälsofrämjande arbetet startar tidigt i barndomen.

A large part of the interactions between horse and rider during horseback riding takes place through the reins and the bit and devices for measuring the tension on the reins, rein tension meters, has fairly recently been developed. To safeguard the welfare of the ridden horse riders need to be aware of the rein tension they apply and actively work to decrease it. Furthermore, there is a need to develop the study of rein tension through new techniques and refined analysis procedures. A good-quality rein tension meter should be small in size, sensitive, durable and as accurate for light rein tension as for strong forces. Rein tension meters used in research on horse and rider interaction commonly depend on strain gauge technique for generating rein tension data.

Grassland is a great part of Swedish agriculture and there is a demand of what the grassland yield is in practice. To be able to control the economic of the milkproduction it is important for the farmer to know how big quantities of pasture there is to use during the year.The work is based on interviews of 22 farmers from southern part of Sweden. Their area of grassland fluctuate between 16 up to 360 hectares. The questionnaire content 32 questions.The most common way to weight the green plant material is to drive over a scale, and to measure the dry extract with your own gauge. It takes in average two minutes toweight one load of green plant material.