Industrialization of construction is by some considered to be a solution to the building industry's problems about the lack of quality, high production costs, low productivity and poor environmental adaptation. Meanwhile, industrialized construction partly earned a bad reputation after the million housing program. As large-scale projects where promoted during this period, it worked very well to use the technique of construction elements. In the mid seventies though, criticism arose which claimed that the aesthetic qualities had been deprived in the corporates effort to make housing production as efficient as possible.Tyréns, Derome and CBBT (centre for building and housing in wood) cooperates in a development project to develop a building system for 4-8-storey buildings, consisting of three platforms: a technology platform, an IT platform and a processing platform. The technology platform consists of flexible, industrially built flat modules of wood and from this platform the subsystem stairwells, is broken out.

The present study examines a new production line of glue-laminated wood (glulam). The glulam is produced from non-planed boards of spruce, which also is convex, that is pressed together with high pressure during the gluing. According to a economic calculation, the material has a economical potential mainly on account of the absent planning. The study mainly found out that the shear strength of the material tolerated the demanded values in standard SS-EN 386, but the delaminating values did not. Since there are more areas to be studied around the material, the prospect to achieve the right delamination values is seen as positive..

The purpose of this report is to examine the possibilities to decrease the number of insects and other pathogens in a crop of pak choi (Brassica rapa), grown with different types of cover and living mulches. Included in the report is a study of literature where amongst others, a summary on the vegetable pak choi and theories of living mulches and different kind of covers are to be found. To examine the amount of predators in the field, traps were used. During the autumn 2002 the tests were conducted in Alnarp. The pak choi and the living mulches were planted/sawn at the same time, the different covers were also applied at this time. The total experiment was divided into six different treatments (plus control) of which three were with covers and three were with living mulches. Once a week the number of leaves, the height and damages were read on ten of the plants from each parcel.

During an investigation of animal welfare in animal production, the focus has for a long time been focused on the absence of stress, suffering and injuries, and positive emotions have not been prioritized. However, in recent years that has been drastically changed. The public interest have increased for buying animal products from animals that have had a decent life, which have led to that play, exploratory behavior and other positive behaviours has come to play a significant role in welfare assessment. The welfare of cattle is difficult to assess since there is currently no ancestors to study, it is thus difficult to determine which behaviors can be regarded as natural and thus positively related, acordingly the welfare of cattle have been forgotten and research on positive emotions of cattle have not been prioritized. The aim of this study was to observe which behavior growing cattle performe, and if there was any differences of which kind of behavior that was observed, if the cattle is keept on slatted floor or on a deep straw bedding. Furthermore, antoher purpose was to investigate if the observed behaviours indicate a positive, negative or natural welfare, and if it is possible to use the observed behaviours in a welfare assessment.

After been told that an ordinary winter service for our combine should cost more than 20000 SEK, not included spare parts, I decided to write this paper about today?s requirement of the workshop on a farm. I think that the lack of proper premises is the reason way not more of the ordinary machinery maintenance or upkeep is performed on the farm. When I did my literature survey I found that the Swedish environmental code, set by the Swedish law regulate how drain or sewer should be built. The environmental code however leaves a lot for your own interpretation. It might not be so bad but it must be very hard for the local environmental office to interpretation the regulations, since they are the ones that gives permission for the sewer in your workshop.

After been told that an ordinary winter service for our combine should cost more than 20000 SEK, not included spare parts, I decided to write this paper about today?s requirement of the workshop on a farm. I think that the lack of proper premises is the reason way not more of the ordinary machinery maintenance or upkeep is performed on the farm. When I did my literature survey I found that the Swedish environmental code, set by the Swedish law regulate how drain or sewer should be built. The environmental code however leaves a lot for your own interpretation. It might not be so bad but it must be very hard for the local environmental office to interpretation the regulations, since they are the ones that gives permission for the sewer in your workshop.

Lime Hempcrete consists of lime, water and hemp and creates an insulating, sound-absorbing, lightweight and environmentally friendly material that can be used in wall, roof and floor structures (Bevan & Woolley 2008). This construction method is not yet developed in Sweden as there has been a ban on the cultivation of the hemp plant. This ban on the cultivation of hemp was removed in 2003, when the material got a boost. You can use it in many different ways and not just in the construction industry (Ahlsten, 2010).In this study we have investigated the possibility to produce prefabricated wall elements of LHC. We have also studied its mechanical properties and dehydration time.

The construction industry can contribute to a healthier sustainable community. A development that is going on right now is by using more prefabricated volume- and plan elements on the construction sites. Building with this method not only provides a benefit to the environment, but also reduces production rates by taking up to 80 percent less time to build. By building in this way it will be easier to recycle and keep all the material that otherwise would go to waste. Also by building inside a protected environment, the material retains its good quality.This report will take forward proposals on further development of prefabricated volume element of wood, by first presenting this construction methods advantages and disadvantages..

Half of Sweden?s 140 000-150 000 sows are culled and replaced by 75 000 gilts annually. Culling of old sows is necessary and allows new breeding material to enter the herd. However, many of the culled sows are young, and have not yet become profitable at the time for culling. Therefore, it is an important question for the pig industry, how to raise gilts to sows with a high and sustainable production level.

This market study was written on behalf of Uni4 Marketing (U4M) and investigates the Egyptian softwood market. The objective was to identify what characterises a good softwood supplier according to Egyptian importers. In addition to this U4M?s competitiveness compared to their competitors was evaluated. The study also identified possible sources of competitive advantage possessed by U4M.

Examensarbetet syftar till att hitta samband mellan ytliga sprickor hos virke, i form av dimensioner och karaktärer, som dagens maskinella avsyningssystem inte klarar av. Tyngdpunkten i projektet har legat på att identifiera eventuella samband mellan verkligt djup hos sprickor och de ytliga sprickmått som kan uppmätas med automatisk avsyning av WoodEye. I huvudsak har projektets praktiska undersökningar gått ut på att bestämma sprickors ytliga dimensioner, djup, typ och position med hjälp av automatisk avsyningsutrustning (WoodEye) samt genom manuell uppmätning i ett antal itusågade sprickzoner. Det provmaterial som använts i utförda försök och som legat till grund för efterföljande sprickanalyser har varit av sådan karaktär att det kunnat jämställas med konstruktionsvirke som normalt sett hållfasthetssorteras enligt europasstandard SS-EN 14081-1.I projektet har 568 sprickor, fördelade över 8 olika spricktyper, analyserats. Av erhållna resultat har det konstaterats att störst respektive minst medelbredd uppvisades hos kådlåpor respektive kantsprickor, störst respektive minst medellängd uppvisades hos splintsidesprickor respektive kådlåpor, samt att störst medeldjup uppvisades hos fäll-, kap- och stormsprickor.

In 1994 a new Forestry Act was accepted in Sweden. One of the aims of the law is to raise consideration forpreservation of biodiversity. Since the new law got accepted and some time has passed, there now lie someinterest in examining whether the law has been effective towards its purpose. Methods suitable for analysishave been examined during this study. The content of this pilot study is based around five parameters whichcan be used to validate the effects of the new law.

Organic rearing of broilers is not a large production in Sweden. In order to create a sustainable yet efficient production of organically produced poultry meat, at a price that the consumers are willing to pay, much more knowledge is needed. It is therefore important to do more research on organic broilers under Swedish conditions. This report is aimed to be a base for further studies. In the study 2000 broilers of the hybrid Ross 308 divided in to two equal groups. The broiler hybrids that are used in Sweden are selected for a high growth rate and are normally slaughtered at the age of 5 to 6 weeks, with a slaughter weight of 1.7-2 kg.

I have studied and worked with various joints and interpreted twenty-six of them to small models. I then placed these into a template so that I could record the properties and their expressions.The protocol show what the joint looks like, and what its strengths and weaknesses are. Moreover, they are translated into a freer text, a poem, that describes what I think and feel about the joint.Based on the protocols, I have selected a number of joints which I then interpret into furniture. I have chosen to move forward in slightly different ways with different joints. Sometimes it is the expression of the joint that has given birth to a new idea, it may be the poem itself that led me on to a form, combinations of joints and that I found interesting, and so on.My interpretations are then further translated into new poems that describe what I see and what I feel when I assemble and disassemble each piece of furniture..

Generally, the economic health of Swedish roundwood truck transport companies has not been good. Profitability is important for maintaining the stability in the transport business, which is a condition for long-term transport planning in the forestry sector. The scope of this study was to identify probable factors influencing the profitability of roundwood truck transport companies and quantify the influence of these factors on economic results. The study was carried out at a major roundwood truck transport organisation in mid-Sweden and was implemented in four steps. In the first step economic results from the haulage contractors were collected and a random sample was taken from accounted net margin for the account year 2005/2006. In the second step hauliers were interviewed to identify probable success factors. At the third step data for identified factors were gathered through a questionnaire.