This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

Warehouses are a key aspect of modern supply chains and play a vital role in the success or failure of businesses today. Figures from the USA indicate that the capital- and operating costs of warehouses represent about 22 % of a company?s logistics costs while figures from Europe indicate 25 % (Baker & Canessa, 2009). Because warehousing is such an important function within a company, the authors chose to focus on this in their thesis. The purpose of this thesis has been to examine the significance of a Warehouse Management System (WMS) and item identification with attention to logistic efficiency.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

Purpose: The purpose of this thesis is to analyse the process of technology sourcing within firms active in the CRT-market. The primary focus of the study is the motives, risks and problems associated with technology sourcing, to construct key learnings for organisations consider undertaking this way to access research and development or those organisations that are already operating in the CRTmarket. Method: As method has abduction been used. The empiric material of the thesis is based on qualitative research in form of interviews in a conversational manner. For correct interpretation and understanding a hermeneutics approach has been used.

This report describes the development of a system for controlling documents. The report starts with a problem description which the company wants an intranet-based solution for. The report then continues to describe the development phase for the different parts of the system which results in a complete system. The company that wanted this system is called Orbit One and is located in Ronneby, Sweden. They have had a problem with old documents circulating in different versions and in different binders.

The objective of this project was to develop an application for mobile phones using the Android operating system. The main goal was, with the help of GPS, to pinpoint locations, measure distance traveled and illustrate the progress on a map. Functionalities for just showing the map, fetching addresses and saving to a database was also implemented. The result of the work was a proper application, called MeasureApp, that fulfills the goals set in the planning stages of the project. MeasureApp can be used to measure distances where accuracy is not a main factor, i.e walks or runs.

To achieve an optimal combustion, an even air/fuel ratio in the combustion chamber is required. An optimal combustion leads to reduced amount of emissions due to a more complete combustion, which is an important matter because of the sharpened environmental laws. This can be attained, among other things, by applying entirely variable cam times. To optimize the engines efficiency and its emissions at all workloads and speeds, an active valve control can be applied. This means that the intake and exhaust-valves can be opened and closed at any time, independent of the crankshaft position.

It´s important when you are about to build a new stable or just increasing your production that you choose the right housing system and that it fits your own farm. In this study I have put together facts about different housing system for fattening bulls in order to get a clearer picture of witch system is the most suitable for my own farm depending on the conditions I have. The background of this work is my own interest for breeding bulls and I will hopefully increase my own production. Due to this I wanted to learn more and increase my knowledge about different housing systems. Through a literature study I have found out the facts about the housing systems I find suitable for housing bulls.

An increasing number of heat pump producers have developed heat pumps that can be connected to solar panels. In this thesis we have examined the possibilities of connecting solar panels to existing ground source- and geothermal heat pumps that has not been adapted to solar panels. During the work process, a prototype plant has been built to compare our theory with the practical results and with our designed sizing tool. The work has rendered in knowledge that will be used to build a sun module that can be easily connect to the existing heat pump system. The existing heat pump, our test plant, has been supplemented by an advanced storage tank used to allow different operating modes.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

När man lever i ett samhälle där användandet av mobila enheter som smartphones ökar, sker motsvarande ökning av frågan på tillgång till befintliga system i mobila enheter. Ett mobilt system kan utvecklas på olika sätt beroende på efterfrågan och kunskapsbasen hos utvecklarna. Det finns olika sorters mobila system, däribland webbaserade och plattformsspecifika system.Den här rapporten innehåller en förstudie för olika tillvägagångssätt för att skapa en mobil version av ett system. Rapporten redogör för olika tekniker som kan användas beroende på vilket system som önskas överföras, samt vilken målgruppen är. Rapporten beskriver också hur framtagandet av ett mobilt system för olika mobila plattformar har skett för ett redan befintligt system..

The purpose of this study is to investigate the proposed leasing standard's potential effects on stakeholders' financial key ratios and estimated bankruptcy risk via prediction models based on accounting ratios. This is achieved by adjusting the financial statements in accordance with the three most widely used ways of dealing with operating leases at date; capitalizing using a multiple, capitalizing through a present value method and to not adjust for them at all. Since the discounted method is said to reflect the proposed standard the closest, this version will be compared against the two other versions. The research is based on Nordic retail companies due to their high share of leases. The study shows that the unadjusted key ratios and estimated bankruptcy risks tend to be too low and would therefore deteriorate in combination with the new standard, when again the multiple method results in too weak key ratios and high estimated bankruptcy risk and would therefore tend to improve in combination with the new standard.

This thesis investigates how different Linux-distributions installation interface relate to the ISO 9241 standard, parts 12 and 13, and how they relate to the installation interface of Windows XP, with the hypothesis: "There is a Linux-distribution whose installation interface according to applicable HCIrecommendations is equivalent to that of Windows XP." With the checklists provided by ISO 9241 an empirical study has been made, and so comparable measurements of how well the Linux-distributions and Windows XP follows the recommendations of the standard was obtained. By comparing the results from the tests similarities and differences between the installation interfaces can be deducted. As the result and the conclusion shows there are Linux-distributions whose installation interface, according to the applicable HCI-recommendations, are equivalent to that of Windows XP..

This thesis examines if commercial-of-the-shelf (COTS) systems meet the needs in different types of organizations. This was investigated through a case study of a COTS system. The system is built for contact centers and used in different types of organizations. Contextual inquiries with users from six different organizations were held together with interviews with stakeholders of the system. This gave an understanding for how the system is used and the needs to be met in the different organizations were recognized.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.