The purpose of this study has been to evaluate whether a Low temperature bio-mass dryer could be integrated with the local district heating system in Malå. The aim is to increase the thermal efficiency of the cogeneration plant in Malå, by lowering the temperature of the cooling medium. Another benefit that comes from this is improved combustion efficiency at the power plant, since drying the fuel causes an Increase of the heating value.Simulations has been made in Excel, and with use of linear regression, to find out if it is profitable. Data for this purpose has been supplied by the power company Skellefteåkraft and furthermore SMHI.The result of the Calculations shows that a very efficient bio-mass dryer is needed, if yield of investments should be made possible. An Investment of 4,27 Mkr, in a dryer, could at a such criterium return 60000 kr/year, if the price of the biomass is 190kr/MWh.

The aim of this master's thesis is to describe the role of language and culture as ethnical identification factors and illustrate how these have been used as political weapons by the Serb regime in Kosovo during the last decade. The thesis discusses the concept of ethnicity, the relations between the politics of identity, nationalism, ethnic mobilization and the importance of language and culture. Kosovo has historically been characterized by severe ethnic antagonism between Serbs and Albanians. Different languages, cultures and religions beside political processes led to ethnic cleavages that paved the way for ethnocentrism, ethnonationalism, chauvinism, ethnic cleansing and civil war. Since 1989, the Serbian authorities have intervened in all important spheres of life, in an attempt to Serbianize Kosovo.

Mass communication today stands for a great number of information in the developed welfare state of Sweden. This was also the case during the social and economic financial crisis in 2008-2011. At this point, the majority of the population chose to turn to the newspapers to look for further information. This essay seeks, in a comparative and theoretical way, and with the help of two theories of nationalism, to understand how the Swedish culture and tradition can be ex­plained via newspapers, and in what way these portray nationalism. What it also sets out to in­vestigate further is what kind of impact it might exercise over the population in its position as one of the leading providers of information.

Through the ages mankind has developed and tested a cascade of varying weapons ofwar, large and small, and has has striven to push these creations to the limits of theirtime. A grand example of this are the medieval siege engines that have changed shapeseveral times over the centuries. After all this time the eciency of these siege engineswill have reached their peek.

Through the ages mankind has developed and tested a cascade of varying weapons ofwar, large and small, and has has striven to push these creations to the limits of theirtime. A grand example of this are the medieval siege engines that have changed shapeseveral times over the centuries. After all this time the eciency of these siege engineswill have reached their peek.

The purpose of this study is to study the Swedish Tax information campaigns in 2010-2012. Questions about what worked better than others, and what impact this has had has been set up. The study shows that work has essentially divorced by 2011,worked with a significant amount of local material. This work had an impact on mass media published locally in newspapers. This work fits well with research in the area showing that messages should be tailored to the target audience and capture the target group's interest.

Background: Media has for a long time been reporting about the audit industry, often focusing on so-called auditing scandals. Economic journalism has grown stronger, the corporations are given more and more power in society and the public interest is increasing. We intend to examine how mass media affects the expectations gap and how the auditing firms operate strengthening the society?s confidence in the industry after mass medial exploitation. We also want to investigate whether the relatively new phenomenon social media is affecting the auditing firms and industry?s external communication, as well as what consequences negative publicity may have for the individual auditor.Aim: The aim of the study is to create an understanding of the audit industry?s relation to the media as well as to describe and analyze how mass media?s coverage is affecting the audit industry, auditing firms as well as the individual auditor.

An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.

An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.

This master thesis was a continuation of a previous study in the diesel exhaust characterization, which is part of the academical work embedded in the EMIR-1 project. The main objective of this thesis work was to finish the installation and make the proper modifications of the particulate mass measuring system located in one of the engine test cells at KTH, in order to be able to measure the mass of the particles from the exhaust of diesel engines.This experiment requires a diluted flow sample from the exhaust that should be sent to the device that makes possible the measurement of particle mass, called TEOM. In the first stage of this project, the objective was to study and make the proper modifications in the existing KTH diluter because there were several problems to obtain a constant dilution ratio from it during tests.This modifications were made and it resulted in a great improvement in the maximum inlet and outlet flow that this diluter can handle. Therefore another modification is proposed for controlling the inlet exhaust flow so it will be possible to regulate the dilution ratio and make it constant along a wide range of engine loads and speeds.The second and most important stage was to make particulate mass measurements possible by analyzing the frequency signal from the TEOM device. The idea was to obtain the frequency of oscillation from the tapered element in the TEOM, and therefore with the proper correlations, be able to predict the particulate mass concentration in the exhaust flow from the engine.An electrical problem in the TEOM circuit was detected and corrected, so the signal that carries the frequency from the TEOM can be analyzed properly.

As trucks are getting more and more advanced, information about their weight has become a key factor for controlling them in a more fuel efficient and safe manner. Knowing the mass of a heavy duty vehicle in real time has been a difficult challenge for the truck manufacturers. With the processing power for electronic control units in trucks steadily increasing, more advanced algorithms for calculating the mass has been developed, but at the moment there still is a wish for better performance.Since there is a lack of good information regarding the external forces acting on the vehicle, forces that depends on the slope of the road, foundation of the road and the wind, the methods have to be able to disregard these. Such an approach, based on an indirect least square solution, has been evaluated in this thesis. The results have been promising and based on these a recommendation about further evaluation has been made..

The aim of this study was to examine if the predictions of the herbage quality in the software Grazemore Decision Support System (DSS) gives a reliable ground for milk production in the north of Scandinavia. Pasture samples from one research farm (Umeå) and one organic farm (Nordingrå) was analysed on crude protein and organic matter digestibility. The results were statistically compared to the predicted values. Measured and predicted herbage mass was compared and a control if the predictions of milk production improved if the predicted input were replaced by the values from the analysis, was made. The concentration of crude protein was underestimated by the model on both farms and the relationship between actual and predicted values was poor. Mean Prediction Error (MPE) was 24% and 31% respectively.

At Forsmarks Kraftgrupp AB (FKA) forces on pipe systems due to transient flow are frequently calculated as a step to verify their structural integrity. In nuclear industries these forces are often calculated with a one dimensional thermal-hydraulic analysis-code called RELAP5. When calculations regarding more complex geometries are needed, the three dimensional code Fluent is often used. This code is highly time consuming and requires large computational power.This projects aim is to compare calculations of pressure, flow and forces carried out by RELAP5 and Fluent for an arbitrary pipe section during transient flow conditions. This has been accomplished by constructing a simple geometry for which a transient flow is simulated in both programs.

During the time of membership in The European Union Swedish domestic policy has gone through many changes. A lot more political areas are being influenced by the EU policy. Today every ministry has got some sort of EU office. Swedish politicians are functioning on two arenas, domestic and European. At the same time Swedish membership has gone from being highly discussed to being a state of normality.

Through interaction with customers, companies can acquire knowledge about- and satisfy the needs of customers. In retailing, the ranges of products are standardized and staffing numbers are scarce. How do companies in retailing deal with adaptation towards their customers given the small staffing numbers? The purpose of this study is to examine if and if so, how companies in the Swedish retailing industry are making adaptations towards their customers and also why these adaptations are being made. To answer this purpose, observations in the retailing industry are conducted and the results show that companies adapt to customers? needs.