The aim of this undergraduate thesis was to formulate advices regarding the use of field beans, cultivated together with spring wheat, as whole-crop silage in feeding to dairy cows. In the thesis, optimal harvest time of the field bean/spring wheat crop, as well as the feeding value and the fermentation quality, was studied. On the research station at Röbäcksdalen in Umeå field bean/spring wheat (70 % respective 30 % of normal seed rate for the pure crop) and pea/oat (70/30) was grown in field experiments both 2002 and 2003. The following year, 2004, the pea/oat crop was excluded and instead field bean and spring wheat was cultivated in three different mixed ratios (field bean/spring wheat; 100:0, 70:30, 30:70). Every year the crops were harvested at four different development stages and the green forages were used in ensiling experiments.

For centuries, springs have played a significant role in our society as water supplies, reasons for where to settle down, and in folklore. There are different reasons why and where a spring forms, e.g. in what kind of soil it has its outflow. Geographic and geochemical surroundings have an influence on spring-water quality.For this project some of the springs in the Lagga perish, Knivsta municipality, Sweden, were selected for a closer study. Water samples were collected from springs for analysis.

Introducing a new type of IT-structure means a change that employees within an organization must adapt to. Today, many companies have implemented information technology in the form of Enterprise Resource Planning (ERP) Systems and find themselves in th so-called Second Wave stage where an after work is ongoing with continual improvement that involves changes that employees need to understand and act upon. To learn how to work with these recurrent misadventures is of importance because it is seen as a critical factor in order to take advantage of the ERP system and its benefits. To study this a study was conducted through personal interviews at Apoteksgruppen AB which a few years ago introduced a new ERP system. There the authors saw that employees learned in different ways depending on the position, and that the more responsibility this person had the greater freedom this person had to resolve their problems and therefore learned more effectively.

Studier på universitetsnivå omfattar oftast mycket eget ansvar och individuellt arbete. På samma gång hörs röster om kollaborativt lärande och gruppkognition där studenter lär bättre när de arbetar tillsammans. I min förstudie intervjuas 4 studenter på det systemvetenskapliga programmet vid IT-universitetet i Göteborg om sitt laptopanvändande i skolan. I intervjun framkommer de att många av studenterna i årskursen på eget initiativ startat kollaborativa mötesplatser för att kunna arbeta och diskutera tillsammans med sina klasskamrater online utan lärares interaktioner. Efter vidare undersökning framkommer det att sådana mötesplatser finns hos alla de tre årskurserna på det systemvetenskapliga programmet.

Full-field flash electroretinography is an electrodiagnostic method used to examine the function of retinal cells. Light stimulation of the eye elicits electrical potentials in the retina. By aid of a corneal electrode and a reference electrode close to the back of the eye, the electrical potentials can be recorded and presented as an electroretinogram (ERG). ERGs driven by mainly one type of cones can be used to examine the function of a single cone class. In human beings, studies have shown the cone class sensitive to light of short wavelengths, the S-cones, to be more vulnerable to acquired damage than the other cone classes (Daley et al., 1987; Gouras et al., 1993; Greenstein et al., 1989). Dogs have two cone classes, S-cones, and M/L-cones (most sensitive to medium to long wavelengths).

This report presents an independent thesis corresponding 15hp and was carried out on Högskolan in Halmstad during the spring of 2014. The thesis is the final course which ends a three-year mechanical engineering program with focus on technical design.The thesis started in an operation which electricians are exposed to every day. The operation in question is cable laying or wiring. The tool they use is called a tension spring and is a long and stiff wire, usually made out of nylon or fiberglass. The tension spring is fed through pipes in the walls and brings the desired cables with it on the way back.

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

Today 70 percent of the world's sand beaches are under recession due to erosion. The global warming may have the effect upon the sea level increasing and the erosion increasing on the sand beaches. To save these sand beaches, the erosion must be prevented. Coast erosion shelters like gabions and sea walls are functioning extremely well to protect the land behind the sand beach, but due to the wave reflections, created in front of these so called hard erosion shelters, the erosion of the front beach is accelerated. During the last decades, artificial sand supply (beach nourishment) has been the adopted praxis.

BRP Systems utvecklar och säljer affärssystem till mindre och medelstora tjänsteföretag. Huvudsystemet är en Java Swing-applikation och för att få bättre struktur på programmet önskar man vid utvecklingen använda ett lämpligt ramverk om något sådant går att identifiera. Denna rapport undersöker två sådana ramverk.Ett ramverk kan användas som hjälp vid utvecklingen av komplexa applikationer. De fungerar som en grund till applikationen som utvecklas och kan erbjuda olika hjälpfunktioner som ofta behövs i vanliga program. Ramverk kan även få källkoden att bli mer strukturerad och lättunderhållen.

Seabased Industry AB develops system for extracting electrical energy from ocean waves with a Wave Energy Converter (WEC). The components is bought from subcontractors and then assembled into wave energy converters, buoys and marine substations by Seabased. In the future Seabased will produce more of the components themselves to reduce costs and to have better control over tolerances. The production line will also include the painting of the WECs and substations, which is performed in a painting line.The purpose of this thesis work is to study what is required to build a painting line, regarding the types of stations, transporting types and the space needed. This will result in layouts for the painting line.To receive the necessary information about production theory and corrosion and surface treatment, literature concerning this area has been studied.

This study investigates a farm in Dalarna which includes 16 ha of farmland and 1, 7 ha of pasture. The purpose is to find out if it is possible to start an animal production in Dalarna. The study is set only to compare spring lamb production with nurse cow production. There are two buildings on the farm that can be used for this purpose. One is an old cowshed, and the other is an unused silo for silage with a roof on top. Both of the buildings are compared to every alternative in the calculations.

How does the recent wave of preferential trading arrangements affect, the incentives for further trade liberalization of member states, and the possibility of obtaining global free trade? And are there any differences in this aspect between custom unions and other forms of preferential trading arrangements? These questions are well debated and have divided international trade researchers into two camps, one in favour for preferential trading arrangements and the other side against them. I have used well acknowledged researchers in the area of international trade theory to make a literature study of the above mentioned key elements in the debate. When comparing the two sides I have focused mainly on their differences, assumptions and results. I have come to the conclusion that there is nothing to be alarmed by of the wave of regionalism that?s occurring in the world today, but caution should be applied and more research in this area is necessary before any certain conclusions can be drawn.

The purpose of this project is to get a fully functional, automatic steering system and a variable breaking system with an emergency breaking function to an off road vehicle. This off road vehicle is supposed to work as an aid in military situations. A team of two, Sebastian Attervall and Nichlas Gustafsson, got an order from Jonas Nyårds and the PreeRunners Project to construct a steering system that could manoeuvre an off road vehicle without any human involvement. To make this possible the vehicle would be guided by onboard sensors, cameras and computers. The team where also assigned to construct an automatic breaking system, there also no human would be involved.