Kugghjul är ett av de viktigaste elementen som finns i en maskin. Kuggväxlar har den högsta verkningsgraden bland kända energiomvandlare idag. Kuggväxlar har höga krav och det krävs en robust konstruktion för att göra dem okänsliga för störningar. Störningar på kuggväxlar ger upphov till transmissionsfel. Transmissionsavvikelser orsakar olika typer av oönskat beteende som exempelvis utmattning och buller är ofta en följd av tillverkningsavvikelser.I detta arbete har ett kommersiellt program, Helical3D, som bygger på kontaktmekanik och finita element metoden används för att studera inverkan av tillverkningsavvikelser på växelns prestanda i form av kontakttryck och transmissionsfel.

Since the Human Immunodeficiency Virus (HIV) that causes Acquired Immune Deficiency Syndrome (AIDS) was discovered in the 1980s, the condom has scientifically proven to be the only technological device that can prevent transmission of the virus during sexual intercourse. This technical approach to the HIV has strongly emphasized that prevention is only possible if the condom is properly used. However, as a technological artifact the condom has shown that its use is laden with values. The question of values on condoms has brought in a heated debate on the moral justifications of its use. In Malawi, just as in other African countries, the Faith Community has rejected the Governmentsplea to promote condoms as the preventive measure against the virus.The Faith Community has emphasized on abstinence and mutual faithfulness as the only reliable means to the prevention of HIV/AIDS.

Artificial insemination (AI) has had a great influence on the development of pig production and is today widely practiced (Gerrit et al., 2005). With AI, genetic progress can at a short period of time be spread worldwide compared with using natural service and the best boars can be intensively used. This is also one of the biggest risks with AI; the impact of semen containing a genetic disease or contamination of pathogens can be enormous. Fortunately, it is a small risk of disease transmission due to many tests of the boars and the semen before use (Maes et al, 2008). It is important that the boars used for insemination have good breeding values along with good reproduction features and have good fertility results (Robinson et al., 2005).

The purpose of this report is to collect, compile and complement the scientific and experience based knowledge concerning high pressure fire fighting today. The goal is to produce a decision data for the Rescue Service concerning the use of high pressure systems for fire fighting. Focus is on hose reel high pressure systems but other systems are discussed too. The report begins by describing the technical properties of the different systems. Then the fire fighting properties are evaluated, including manoeuvrability and safety for users.

In the spring of 2006 we had our first outbreak of avian influenza of highly pathogenic H5N1 (HPAI) among wild birds in Sweden. This disease have impact on poultry industries world wide. Sporadically the virus infects other species than birds and we now know it can even cause fatal infection of humans. There are not yet any confirmed cases of transmission of the disease between humans though a suspected case in an Indonesian family is under investigation. If a mutation occurs that changes the pathogenicity and host affinity to humans we are at a risk of a new pandemia, perhaps like the Spanish flu in 1918-1920.

Preporsition for bachelor thesis project, working from the inside and out. Emphasising spatial quality and experience, More or less ignoring form and program. I?ve had issues with these aspects in earlier project, the form or the program takes alot of place in the project. I haven?t tried this approach before, it?s an attractive thought to allow the project take a form of it?s own, enclosing those spaces i create.The initial concept was to place the pools on the ground (not digging them into the ground) making them volumes that divide and define spaces.

Ticks and the diseases they transmit are of major importance throughout the world. In Uganda, cattle are the most important livestock from an economic point of view. Livestock keepers fear bi-directional transmission of tick-borne pathogens between their livestock and wild animals. This cross-sectional study was conducted to establish and compare the sero-prevalence of the tick-borne pathogen Babesia bigemina among randomly selected Ankole Long-horned cattle and European crossbred cattle on 30 farms in Kiruhura district, in two sub-counties near Lake Mburo National Park in South-western Uganda. Half of the farms were situated in close proximity to the park and thereby housed cattle with more frequent wildlife-livestock interface (Sanga), whereas the other half had less frequent contact (Kikatsi).

The purpose of this thesis was to develop and optimize a method of analysis for combustion of organic chemical products, followed by an ion chromatographic quantitative analysis. This was to be achieved with the decomposition equipment IKA AOD 1. The aim was to receive a precise and repeatable method that would be able to be applied to the process of qualification and technical marking of chemical products at the company, OKG AB in Oskarshamn. A complete instruction for the decomposition equipment and the method of analysis was written. A number of parameters were chosen from the general method of the combustion equipment, which then was tested parallel with a simultaneous development of an appropriate ion chromatographic method.

The use of forage maize has increased over the last years. The aim of this litterateur review was to summarize a part of the research that has been conducted on forage maize for growing cattle, including cultivation and conservation of the maize. The forage maize is planted in April or the beginning of May when the temperature in the soil is between 6 and 10°C. Maize needs high temperatures and much water. Maize is harvested in the autumn when the dry matter (DM) is more then 30% or the plants have been exposed to the first frost in the autumn.

The aim of this work was to investigate possible risk factors for colic in horses, and to describe what horse owners can do to prevent this condition. The gastrointestinal system of the horse is constructed for continuous high fibre consumption for a period up to eighteen hours a day. Under those conditions, the continuous flow of digesta stimulates gut motility so that the intestines move constantly. When the diet is changed rapidly and the horse is being fed high rations of concentrates each day, the risk of getting colic is higher compared to when consuming less concentrates and giving the horse a stable diet. Lack or absence of access to water and restricted allowance to move freely every day increases the risk of colic. Changed management practices and decreased activity contributes to increased risks, as well as other critical risk factors such as breed, season and age combined with rapidly changed management. More knowledge and education is required of the horse owners about feed requirements in the horse, management routines and rapidly changed activity..

In this project a washing station has been constructed for Albany International AB. At present, there is no existing system to clean the dirty pipes that are coming back to the company.The work followed the product development process, and it started with the requirements list. This was followed by brainstorming, evaluation and completion.The result was a concept for de present time and one concept for the future.The present concept is intended to be built immediately. This is an adjustable bench with sliding bearings to facilitate the work. The actual cleaning is done with a high pressure washer that uses hot water.

In this essay the renewal of the modern sacred art has been examined through the creation of three works of art from the art project ?Kyrkorummet?. The aim has been to show that renewal of the modern sacred art is best accomplished by the combination of the artist history and Bible knowledge and the open mindness of the beholder towards the new and creative, in order to communicate the gospel in modern time.The large extend of the art project demanded a selection of the art works. Therefore, three were chosen and they show the last supper and the baptism in a renewal way including both symbolism and creativity. To complete and facilitate the analyses, a theme, light and water, have been used as well as relevant theories in art history with Kandinsky as main art critic.Through the art project and it?s teaching, history in combination with present time through visits in different and modern churches, thoughts have been stimulated and the result has been new works of art that speaks of our time.

People are constantly using there friends in order to ask for a favor or to get hold of some information. This is usually done unconsciously and it is just viewed as everyday life behavior. The function and the use of these links definitely have a value, which means that it can be viewed as a form of capital. But this capital is not caught in the traditional theories of physical capital or human capital; it demands it?s on theorization.

Today, many veterinary hospitals offer rehabilitation as a service. We think that this is an interesting subject and therefore we want to find out what rehabilitation methods that are available in Sweden for dogs and horses. We want to give animal nurses and other persons who have animals as an occupation an survey that shortly describes how the methods are performed, what physical effect they have in the body and to give examples in what conditions they are used. To find out what rehabilitation methods that are available we sent out two different questionnaires, one to hospitals/clinics for small animals and one to hospitals/clinics for horses and other companies that works with rehabilitation of horses. The information about the methods described in our project we have found in literature and on the Internet.

The thesis is an examination of the methods that are appropriate and long-term choice to obtain clamping force and secure screw joints in production. The employer, Scania CV AB, transmission manufactures axle gears to all trucks produced in Södertälje. One of the most common assembly elements is screw joints, where the clamping force is essential to achieve a secure joint. Current methods to secure the joint is due much of the friction effect and is an indirect method to measure the clamping force. The clampforce accuracy becomes more widely with torque angle control.