Legionella can be prevented, the question is how. This report is a degree in construction engineering education at Chalmers University in Gothenburg. A comprehensive written publication for Legionella-safe plumbing installations is not available and therefore requested. The purpose of this report is to present preventative measures against Legionella bacteria growth in tap water and in other systems where Legionella bacteria are a potential problem. Technical solutions are presented including how different systems function and what their advantages and disadvantages are.

In today?s World is climate change an important and hot topic. Climate scenarios for Sweden show a warmer climate, especially during the autumn, winter and spring. The same climate scenarios also show that the precipitation will increase during this part of the year, however, during the summer the opposite is expected to occur. The purpose of this essay is to examine how future climate change will affect Stockholm especially the expected increase in precipitation, which may lead to a rising level of the Lake Mälaren. During 2000/2001 was Stockholm hit by a flood. This flood nearly resulted in major consequences and showed that there were significant risks for the city of Stockholm and increasing precipitation will result in even more water in the drainage systems of Lake Mälaren. The results presented here show that it is important to increase the drainage capacity of Lake Mälaren in order to reduce the risks of flooding in the central parts of Stockholm.

Wetlands are important ecosystems and form habitat for both common and threatened species. In Sweden, as well in many other places on earth, there is a lack of wetlands. There is an expressed will to adjust this lack through restoration of wetlands with reduced function and through construction of new wetlands. Follow-ups and evaluations are important steps to optimize these actions. The wetland Vattenparken was constructed 1999 ? 2000 for treatment of surface water.

Emerging infectious diseases poses a great future threat, not only to humans but also to domestic animals and wildlife. Even though the majority of these infections only cause minor health problems, the relatively recent emergence of HIV clearly illustrates that the next major human pandemic may surface at any time. Regardless of what the name indicates, most emerging human pathogens are not believed to be recently evolved, but to have existed previously in the natural environment. Most emerging pathogens are zoonotic, i.e. able to infect animals besides humans.

Every year, pesticides are found in surface and ground waters in Sweden. Fungicides are in common usage and applied in high amounts against potato late blight. The present thesis examined the possible removal of four fungicides (metalaxyl, cyprodinil, propamocarb and mandipropamid) from water using the microalgae Chlorella vulgaris. Microorganisms are capable of decomposing a range of organic pollutants and the main focus in previously published studies has been on bacteria and fungi. Microalgae are mostly studied due to their high capacity in biosorbing heavy metals.

The depth-to-water-index (DTW-index) is derived from digital elevation models (DEM) to map soil wetness, in terms of distance from soil surface to the ground water table. The aim of this GIS based study was to investigate the existence of a relationship between DTW-index and forest site productivity (SP). The belief of such an assumed relationship was based on knowledge that the ground water level is related to site properties that can either promote or impede tree growth. Data primarily comprised rasters of the Krycklan catchment in northern Sweden and depicted DTW-index and a laser scanned vegetation height. The 100th height percentile of each pixel in the vegetation raster was assumed to mirror the top-height, letting it act as a relative measure of SP within a delineated area of equal stand age.

Rock groundwater has always caused major problems when tunnelling. Water leaking into tunnels can cause large problems, not only on the construction itself but also on the environment. A continuous water leakage can lead to a declining water supply, and geotechnical problems can occur as subsidence in the ground. Therefore it is of great importance to predict the consequences that can appear in the surroundings due to a declining groundwater surface.The aim of the study was to investigate different methods for predicting leakage and changes in groundwater level due to tunnelling excavations in rock. This thesis was performed by comparing mathematical methods, actual groundwater changes and results from preliminary investigations.Investigations were made for three railway tunnels planned by Botniabanan AB.

A study was made to evaluate how current measurementscould help to determine how particles from fish farms are dispersed. During sixweeks of the summer 2012, two different current measurements were conducted.One of them consisted of measurements each fifth minute at 5 m and 15 m atthree locations for 14-16 days each. The other consisted of profilemeasurements at each location at four times during the period of six weeks. Forthe current measurements two instruments (model RCM 9) were used. A two weekmeasurement can give enough data to make an evaluation of how the currents at alocation will transport litter from a fish farm.

In Sweden, the eutrophication of lakes, water courses and the coastal areas is considered the major threat to aquatic ecosystems and therefore actions taken to reduce the nutrient load to aquatic system including the Baltic Sea has high priority. There are many different sources of phosphorous and nitrogen and domestic wastewater is one contributing factor to the high load. Especially waste water from households that is not connected to municipal sewage treatment or a local small scale plant with appropriate nutrient removal efficiency is considered a problem. These types of households are quite common in rural areas in Sweden and in areas where summer houses has been converted to permanent living. Swedish legislation now permit the municipalities to decide in which areas within the municipality higher demands of the local small scale treatment facility should be met by the households (i.e.

In this bachelor essay an attempt is done, to recreate a probable Bronze Age landscape on Gotland, with GIS as a tool. The landscape on Gotland is situated with many different monuments dated Bronze Age, such as cairns and stone ships. In creating of the maps, two possible shorelines contemporary with the Bronze Age have been calculated and marked on the maps. Furthermore, peat lands have been drawn upon the maps, by using the information from geological maps.A landscape variable have been compared between Bronze Age places and Early Iron Age houses; the soil type. On Bronze Age places gravel is the most common, while moraine marl is the most common on places with Early Iron Age houses.From a selection that were made, all Bronze Age places where within 3 km from the water, either the recreated shoreline or peat land.

Powder Metal (PM) gears are machine element components which operate under the same principle as conventional gears, but, due to their intrinsic material characteristic need to be designed slightly different, and its manufacturing process offers advantages previously unobtainable by conventional steel gear manufacturing methods. The use of PM in similar applications, such as synchronous hubs, makes them a suitable candidate for production in such material. The current master thesis work focuses on gear design using PM by utilizing finite element method (FEM) to reduce weight and inertia taking into account root bending strength and tooth deflection.First a topological optimization is used to determine feasible candidates for different web designs which have as objective to reduce volume, similar topologies were shown during different loading conditions; and hence, this topology was chosen as a suitable candidate. A shape optimization of the topological candidate was performed having as state variables root bending strength, independent for compressive and tensile side of the tooth loading; and tooth deflection, which in concept can be correlated to static transmission error (TE).Another aspect in this thesis analysed is the possibility to incorporate non-trochoid root geometry, a trochoid root is always present when machining with a hob, into the gear root and hence reduce the stress concentration here. Due to the use of PM, a non-symmetric optimized root can be achieved and hence be optimizing compression and tension.Results showed significantly lower inertia, for example certain results showed 40% reduced when compared to solid gear, with adverse effects as increase in tooth deformation and increase in maximum principal stress.

Grubbe Ventilation AB is a sheet metal and ventilation company who provides design, installation, service, and repair of ventilation. The company is expanding their business by building a new facility in Umeå, Västerbotten. The property is designed to be used for both office and industrial work.Grubbe Ventelation AB has not yet decided upon wish system which is to be established to provide the building with heating and cooling. The consulting firm Umeå Projekt Team has therefore been asked to investigate the possibilities to invest in geothermal- heating and cooling.If the investigation of a geothermal heating- and cooling system would provide favorable results it would be a very appropriate alternative that provides energy at low costs and are an environmentally friendly option as the energy comes from stored solar energy in the ground is provided by stored solar energy in the ground.The facility ´s heating and cooling consumptions are calculated in the program BV2 and the result indicate a heating demand of 185 000 kWh per year due to thermal transmittance, transmission losses, heating of warm water and a cooling requirement of 5500 kWh.Three different systems of geothermal heating and cooling were tested in the computer program Energy Earth Design. The results show no difference in the dimensioning of the drill hole if merely heating were to be used or both heating and cooling were to be established.

The boiling properties are an important quality issue of the potato. In order to obtain adequate boiling properties the growth of the potato needs to be controlled and interrupted at the right time. However, it is difficult to determine when to stop the growth. Specific gravity can easily be measured and can sometimes be used as a tool for estimating the boiling properties. This report discusses different aspects of the specific gravity of the potato and how it can be used as a tool to determine the appropriate time for vine killing.

The boiling properties are an important quality issue of the potato. In order to obtain adequate boiling properties the growth of the potato needs to be controlled and interrupted at the right time. However, it is difficult to determine when to stop the growth. Specific gravity can easily be measured and can sometimes be used as a tool for estimating the boiling properties. This report discusses different aspects of the specific gravity of the potato and how it can be used as a tool to determine the appropriate time for vine killing.

The cat has evolutionary become an obligate carnivore. Today it is common to feed the cat a dry food. Studies have shown that the dry formula can have negative consequences for the cat. A literature study where conducted to investigate whether the cats origin makes it incapable to compensate for the changes a dry food entails. The impact and implications regarding water intake, energy intake and blood glucose concentration when feeding the cat dry food where examined.