The objective of this work was to introduce measures to reduce energy and water demand at Gävle Söder 17:10. To succeed, this energy audit has been made. The work is based on collected statistics from the property owner Norrporten, measurements, literature review and through consultation with experts in the field. Two models, one for each building, have been created in the simulation program BV2 to estimate the potential of energy measures based on the collected information. The models in BV2 have been verified against the statistics of the energy consumption.With the help of calculations and simulations, seven cost-effective measures have been identified.

This master thesis was initiated with the aim to answer at what level of installed capacity of wind power in the northern parts of Sweden it would be beneficial to improve the transmission capacity from the northern Sweden. During the process of this work the aim has changed to try and create a model that can be used to analyze how well the hydro power installed in the northern Sweden can even out the quick changes in wind power production.To create a good model of all hydro power in northern Sweden is a very large job, unfortunately too large for a master thesis. This report therefore ends with an extensive analysis of the simplifications that have been made and their effects as well as a list of the future work that has to be done.The model that has been created have shown to be effective and produce good results. The conclusions that can be made is that the northern Swedish hydro power have very good possibilities to balance the wind power production. Only a few cases where water have been spilled even though there has been some free capacity has been discovered.

The aim of this study was to evaluate the effects on a simulated wastewater plant regarding GHG emissions and use of energy and resources when implementing source separated wastewater systems. The effects were studied for different restrictions of effluent quality and for different temperatures on the influent. The simulation model BSM2G calibrated for Käppala wastewater treatment plant was used. The task was executed by simulating nine different scenarios with an increase in influent load from new connections equivalent to 3, 10 and 30 % of the present connections. These new connections were served by conventional, urine separated or black water separated systems.

A pavement construction designed to cope with the different type of traffic loads; it is exposed to and at the same time it can resist the effect of the climate. A road structure consists of sub- and superstructure which is divided by a boundary known as terrace. During the construction of unbound layers (base course and sub-base course) in the superstructure, it is always ensured that the material meet the requirements for bearing capacity and the degree of compaction. These parameters are controlled by various laboratory tests and control methods. To obtain increased knowledge of the material and improve the quality of the compaction in the field, it is necessary to perform laboratory tests in order to determine material properties.A base course material 0/ 32 mm limestone from Gotland (Hejdeby) was investigated in this study.

An analysis of a specific application of anaerobic wastewater treatment at a pulp and board mill, Stora Enso Skoghall, was carried out. A literature study was done and effluent wastewater from CTMP pulp production was analyzed. The analysis consisted of a broad constituent analysis and an anaerobic treatment trial. Results from these test where used to calculate the treatment effectiveness and resulting energy potential at the mill.The literature study and constituent analysis showed that toxicity of the water to be treated, due to wood extractives and sulphur content, was of concern. Detoxification chemicals targeting these constituents where used in the anaerobic treatment trial.

ITT Water & Wastewater (före detta ITT Flygt) tittar på att eventuellt genomföra en förbättring av ytbehandlingen av deras pumpar för att eliminera de rostangrepp pumparna utsätts för idag. Examensarbetets uppgift är här att analysera och beskriva miljöeffekterna av de nya ytbehandlingsmetoderna som företaget undersöker.Målet med studien är att få fram ett underlag och en rekommendation om vilken ytbehandlingsmetod företaget bör välja ur miljösynpunkt.De olika metoder som studerats är:? Järnfosfatering + ED-lackering? Zinkmanganfosfatering + ED-lackering? Oxsilan + ED-lackeringDessa metoder har jämförts med nollalternativet, vilket innebär att samma metod som tillämpas idag fortsätter att användas.Miljöeffekterna som studerats för de olika metoderna är:? utsläpp till luft och vatten? avfall? energiAv de tre nya metoderna samt nollalternativet är Oxsilan följt av ED-lackering det alternativ som ger minst påverkan på miljön. Metoden har inga utsläpp av flyktiga organiska ämnen till luft, inget farligt avfall bildas och det avfall som ändå bildas är litet. Metoden har även lägre energiåtgång än de andra studerade metoderna.2008:Nr 2 Teknik.

Fartyg använder sig av stora dieselmotorer för framdrift och för att producera elektricitet ombord. Motorerna samt diverse kringsystem har behov av kylning och till detta används kemikaliebehandlat vatten i ett slutet kylsystem. Vid tömning och läckage från systemet tenderar det kemikaliebehandlade vattnet att hamna med länsvattnet. Länsvattnet genomgår en reningsprocess innan det pumpas överbord. Denna reningsprocess är inte utformad för att avskilja kemikalier och dessa tenderar att hamna i havet.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Bebyggelseantikvariskt program15 hpInstitutionen för kulturvårdGöteborgs universitet2015:23.

For many years, the construction industry in Sweden has not developed much of an integral approach for design across disciplines. The sector?s impact on society, economics and environment is huge. To make the interactions within the construction industry more efficient, a relatively new concept called BIM (Building Information Modeling) has been introduced. The idea with BIM is that the different actors of the construction industry will work through intelligent CAD software, with common file formats and more cooperation between different actors during the various steps of the building and construction process.The technical consultancy company WSP Sweden is working actively to implement BIM within the frame of its activities.

A study was made on four environmental ponds in Sölvesborgs municipality. The reason forthis was to see if the ponds had fulfilled some of the questions that was mentioned in theproject ?Rädda Hanöbukten?. The questions were as following; do the environmental pondsdecrease the leakage of nitrogen and phosphorus into Hanöbukten, do the ponds decrease theuse of groundwater in Sölvesborgs Municipality and are there any restrictions on what thewater in the ponds is allowed to be used for. In order to answer these questions aquestionnaire was made and interviews were held.

The report comprises two separate parts:part 1:  Temperature needs for district heating in the paint shop for axles in building 210part 2:  Energy and low temperature waste heat solutions in heating and cooling systems for   building 64 with surroundingsThe paint shop for axles in part 1 has air quality requirements in places for coating of axles. Toachieve desired air properties there are different process ventilation systems, which consist ofventilation coils for heating and cooling, plus air humidifier. The ventilations coils for heating usedistrict heating. Today the ventilation coils use water of 100°C to achieve necessary air demands inthe coating boxes. This part of the report investigates whether the existing system would achievethe air requirements with a water temperature of 75°C instead of 100°C in the ventilation coilsduring the coldest parts of the year.

Little attention has been paid in the literature to libraryassistants in Swedish public libraries. In this bachelor thesis,the professional role, work duties, career prospects and statusof library assistants are examined at two public libraries.Because of a scarcity of published information on thedevelopment of this profession in Swedish public libraries,retired library assistants, as well as currently employedlibrary assistants, librarians and a library head wereinterviewed.Since the ?80s, work duties of library assistants havechanged, with a reduction in some of the more manualaspects of library work, the development of new duties and,overall, an increasing similarity in the duties performed bylibrary assistants and librarians.Additionally, the public perception of library assistants as acategory distinct from librarians was investigated bydistributing questionnaires to library patrons. Contrary toexpectations prompted by statements in the literature, asubstantial portion of visitors was found to be aware of thetwo separate categories.Library assistants at Swedish libraries have no careerprospects, unless they undertake studies in their own freetime and at their own cost, and obtain a librarian degree. Adifference between the situation of library assistants inSweden and corresponding professional categories in a fewother countries is that, at present and for several years, noformal education for library assistants has been available inSweden.

Ground construction has to a large extent been dominated by traditional meth-ods during the last 50 years. Although the construction has been changed meanwhile innovations are not accepted. In collaboration with NCC Ltd Region South, I have examined a modern con-struction methodology that has been developed by NCC for future large pro-jects. The method is divided into two central phases. Phase 1 is? Single Pro-duction? which is a preliminary period for ground constructions to come.

Biogas is a renewable energy source that is produced by anaerobic digestion of organic mate-rial. In Sweden, biogas predominately comes from sewage water sludge and landfills or from organic waste of households and industries. Small scale digestion plants at farms are espe-cially expected to contribute to increased biogas production in the future. Biogas can be ob-tained directly in it?s raw form and used as fuel in a combustion chamber.

This bachelor?s project deals with both the problems of high water temperatures in fishponds at a fish-breeding station and of the nutrient load to nearby lakes and streams in Harasjömåla, Blekinge, Sweden. Theory, methods and results of the analyses are presented in the report..