Traditionally, rolling mills use emulsions based on a mixture of oil and water for lubrication. Since two years ago SAPA has been using (instead of oil) a synthetic lubricant so called conditional emulsion for hot-rolling of aluminum. This lubricant is water based and homogenous at ambient temperature, but switches to a two-phase system at heating above the cloud point.This project aims to validate and if necessary modify an existing HPLC method for quantifying two out of three key components (A, B and C) in the conditional emulsion. Attempts to develop a method to quantify the pH adjusting components, X and Y were also made. These two methods are required to optimize the lubricant.Due to the complexity of the components, it has been difficult to present a method for quantification, and HPLC with ELS detection was chosen after a long series of trials.

The dishwasher is a wide spread product that occurs in many households. It saves the user time,water and energy. When using a dishwasher instead of doing dishes by hand a lot of energy issaved.The importance of lowering the energy consumption does not only come from the consumerwinnings but also from an environmental point of view. Scientists are certain that the globalwarming comes from the emission of green house gasses that is created by human consumptionof oil, gas and coal.Dishwashers today are a lot more energy efficient than older dishwashers, but there are stillmargins to lower the energy consumption. The aim with this project is to investigate thedishwasher and it?s washing cycle, noting different phases and components that contribute towaste of energy.

The purpose of this thesis was to make an energy survey and quantify energy flows of individual unit operations associated with the biogas production in Uppsala Vatten och Avfall AB:s biogas plant, located at Kungsängens gård. Moreover, large consumers of energy would be identified and analyzed. The objective of this energy survey was to obtain a detailed understanding of the energy use in the biogas production. The energy survey was divided into two parts: electricity and heat. Each part was treated separately and with somewhat different approach. To estimate the electricity usage during the projcet the rated power of each selected unit operation was noted and multplied with the measured time of usage.

The purpose of this thesis was to make an energy survey and quantify energy flows of individual unit operations associated with the biogas production in Uppsala Vatten och Avfall AB:s biogas plant, located at Kungsängens gård. Moreover, large consumers of energy would be identified and analyzed. The objective of this energy survey was to obtain a detailed understanding of the energy use in the biogas production.The energy survey was divided into two parts: electricity and heat. Each part was treated separately and with somewhat different approach. To estimate the electricity usage during the projcet the rated power of each selected unit operation was noted and multplied with thenmeasured time of usage.

Interference in an ecosystem means a disturbance. When harvesting, forest roads have to be build to cope with heavy duty vehicles. Crossing brooks can not always be avoided. In this case bridges or culverts have to be built. There are many different kinds of culverts and depending on what type you choose and how you place the culvert, the watercourse and the water organisms can be harmed in different ways.

The idea of using algae in different areas and exploring its possibilities is nothing new. Already in the early 1950s microalgae was explored as a possible food resource because of its high protein content. Lately there has been an increased interest in its potential for industrial use. Wastewater treatment is a possible use of algae since the algae grow well on the nutrients present in the water. This offers the possibility to grow algae for nutrient reduction and use the biomass for energy or animal feed since many alga species has a good nutritional value. Approximately 800-1000 m3 water is applied per 1000 m2 of greenhouse area during one season in a tomato production.

Successful broiler production in hot climates requires knowledge of how birds are affected by heat stress. It is important with access to water and good ventilation to facilitate coping with the heat. It may be useful to reduce the consumption of feed during the hottest hours of the days, which together with a few hours of extra light available could improve both productivity and animal welfare. The vision in birds is superior to that of humans and most other mammals. Continuous light and light with low intensity can cause eye injuries, affect the eye development in young chicken negatively, as well as provide increased incidence of foot pad lesions. Access to light affects the production but also the welfare of birds.

Syndecan-1 is a cell surface proteoglycan which participates in cell adhesion, differentiation, motility, morphogenesis and intracellular signaling. The two glycosaminoglycans heparan sulfate and chondroitin sulfate are covalently attached to the ectodomain of syndecan-1 via a tetra saccharide linkage sequence. However, the ectodomain can be modified having only one or neither of the glycosaminglycans attached. The glycosaminoglycans are capable of binding ligands such as fibroblast growth factors (FGFs) and support activation of receptors. The ectodomain is proteolytically cleaved from the cell surface by metalloproteinases in a process known as shedding.

AbstractThe purpose of this study was to see if there is a connection between smolt length from Brattfors salmon cultivation and temperature. Climate changes are expected to give a higher temperature that could result in a longer growing season for the fish.Cultivated smolt is today bigger than it was before, it is also bigger than the wild salmon. The growth season of salmonids depend on the water temperature, salmonids need 6-80C to grow. Water temperature has been surveyd since the late 50´s in Brattfors. The result shows that it?s now considerable more days per year with higher temperature.

AbstractDegree thesis Solid content in Lime Mud By Andre Flodin Process operator program ? Umeå University 17/6 ? 2014 Pages: 21A thesis was made on Billerudkorsnäs production unit in Karlsborg where lime kiln in the causticising department of chemical recovery plant does not meet the required production. Causticising department is the final step in the chemical recycling unit. There, the filtered green liquor is mixed with lime to recover the cooking chemicals used in the pulp factory. The cooking liquid is called white liquor.

The freshwater pearl mussel (Margaritifera margaritifera) is a large freshwater mussel. Because of its sensitivity to human impact, such as eutrophication, acidification and alterations of hydromorphology, the species is considered as a robust indicator of stream water quality and biodiversity. Moreover, due to the species complex life cycle, including a larval stage on the gills of salmon and trout, and sensitivity of early life stages, regeneration is often used as an indicator. The freshwater pearl mussel is also used in the expert judgement of status classification of benthic invertebrates according to the European Water Framework Directive. The purpose of this study was to gain a deeper understanding of the freshwater pearl mussel as an indicator for Swedish streams. It was made with two types of association analyses.

The aim of this project was to improve taste of a liquid food product, comprising extremelybitter and unpalatable amino acids and one unrevealed ingredient. The amino acids were Lleucine,L-isoleucine, L-valine, L-threonine and L-lysine monohydrochloride. Experimentaldesign was set up as a screening of water solutions comprising these ingredients (called BCAAsolutions) and added ingredients with potential to improve flavour. BCAA solution withingredients that were potential bitterness suppressors were evaluated in flavour, bitternessand/or palatability. Solutions of separate amino acids were also studied.

PSI-N is one of the subunits in eukaryotic Photosystem I (PSI) and is located on the lumenal side of the thylakoid membrane. It is known to interact in the electron transport chain between plastocyanin and PSI, but the mechanism behind the interaction is still unclear. To achieve a better understanding of PSI-N´s role in the photosynthesis it is necessary to develop a method for purification of PSI-N. The goal with this project was to design a plasmid that encodes a fusion protein containing PSI-N. With use of proteases the fusion protein can be cleaved into purified PSI-N.

PSI-N is one of the subunits in eukaryotic Photosystem I (PSI) and is located on the lumenal side of the thylakoid membrane. It is known to interact in the electron transport chain between plastocyanin and PSI, but the mechanism behind the interaction is still unclear. To achieve a better understanding of PSI-N´s role in the photosynthesis it is necessary to develop a method for purification of PSI-N. The goal with this project was to design a plasmid that encodes a fusion protein containing PSI-N. With use of proteases the fusion protein can be cleaved into purified PSI-N.

This report describes how the system may be exposed to oscillations and how this can lead to resonance. Resonance is a phenomenon that occurs when a system is affected by external periodic oscillations with frequencies close to the system's natural frequencies. Structures subjected to resonance can risk great damage and destruction, why resonance is something that is important to take into account when designing structures. Alternative ways to counteract resonance is to supply damping in the system. Damping means that the resonance decreases instead of letting the amplitude increase.The report discusses some examples on constructions that have experienced the effect of resonance.