ITT Water & Wastewater (före detta ITT Flygt) tittar på att eventuellt genomföra en förbättring av ytbehandlingen av deras pumpar för att eliminera de rostangrepp pumparna utsätts för idag. Examensarbetets uppgift är här att analysera och beskriva miljöeffekterna av de nya ytbehandlingsmetoderna som företaget undersöker.Målet med studien är att få fram ett underlag och en rekommendation om vilken ytbehandlingsmetod företaget bör välja ur miljösynpunkt.De olika metoder som studerats är:? Järnfosfatering + ED-lackering? Zinkmanganfosfatering + ED-lackering? Oxsilan + ED-lackeringDessa metoder har jämförts med nollalternativet, vilket innebär att samma metod som tillämpas idag fortsätter att användas.Miljöeffekterna som studerats för de olika metoderna är:? utsläpp till luft och vatten? avfall? energiAv de tre nya metoderna samt nollalternativet är Oxsilan följt av ED-lackering det alternativ som ger minst påverkan på miljön. Metoden har inga utsläpp av flyktiga organiska ämnen till luft, inget farligt avfall bildas och det avfall som ändå bildas är litet. Metoden har även lägre energiåtgång än de andra studerade metoderna.2008:Nr 2 Teknik.

This thesis was done after a request from the county?s administrative board of Västmanland to provide the board with a better understanding of how green areas have changed within Västerås municipality over time.The purpose and goal of this study was thus to measure and analyze how much of the green areas within Västerås municipality that have disappeared during the past one hundred years as well as to provide a review of previous studies regarding the importance of green areas for humans as well as the biological diversity.In order to answer these questions I have in this study used a combination of a literature study, cartographic analysis as well as a time series analysis. The computer software used to do the measurements of the green areas was ArcGIS which is a geographical information system.In the cartographic and times series anlaysis measurements and analysis was made of the district map of 1911, the economic map of 1950 and the property map of 2011. The measurements show that the municipality has grown with 46,3 km2 over the last one hundred years. New neighborhoods? have emerged and the municipality has expanded.

Fartyg använder sig av stora dieselmotorer för framdrift och för att producera elektricitet ombord. Motorerna samt diverse kringsystem har behov av kylning och till detta används kemikaliebehandlat vatten i ett slutet kylsystem. Vid tömning och läckage från systemet tenderar det kemikaliebehandlade vattnet att hamna med länsvattnet. Länsvattnet genomgår en reningsprocess innan det pumpas överbord. Denna reningsprocess är inte utformad för att avskilja kemikalier och dessa tenderar att hamna i havet.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Bebyggelseantikvariskt program15 hpInstitutionen för kulturvårdGöteborgs universitet2015:23.

For many years, the construction industry in Sweden has not developed much of an integral approach for design across disciplines. The sector?s impact on society, economics and environment is huge. To make the interactions within the construction industry more efficient, a relatively new concept called BIM (Building Information Modeling) has been introduced. The idea with BIM is that the different actors of the construction industry will work through intelligent CAD software, with common file formats and more cooperation between different actors during the various steps of the building and construction process.The technical consultancy company WSP Sweden is working actively to implement BIM within the frame of its activities.

A study was made on four environmental ponds in Sölvesborgs municipality. The reason forthis was to see if the ponds had fulfilled some of the questions that was mentioned in theproject ?Rädda Hanöbukten?. The questions were as following; do the environmental pondsdecrease the leakage of nitrogen and phosphorus into Hanöbukten, do the ponds decrease theuse of groundwater in Sölvesborgs Municipality and are there any restrictions on what thewater in the ponds is allowed to be used for. In order to answer these questions aquestionnaire was made and interviews were held.

The interest in small-scale electricity in Sweden has increased strongly in recent years. The interest is noticeable both among politicians to increase the share of renewables in the energy mix, and among electricity consumers to partially replace purchased electricity with self-produced. This has resulted in a significant increase of electricity production in low voltage grids in recent years, and the trend appears to continue in the coming years. The majority of the new production plants are solar cells, followed by wind turbines, and it is also in these the greatest efforts are made in this paper.Distributed generation is often seen as something positive since it will contribute to reduced transmission losses and reduced voltage drop in the networks, and that it increases the share of electricity from renewable sources. In cases where the grids are not strong enough, or in other ways not adapted to manage the installed production, power quality may be adversely affected.

The report comprises two separate parts:part 1:  Temperature needs for district heating in the paint shop for axles in building 210part 2:  Energy and low temperature waste heat solutions in heating and cooling systems for   building 64 with surroundingsThe paint shop for axles in part 1 has air quality requirements in places for coating of axles. Toachieve desired air properties there are different process ventilation systems, which consist ofventilation coils for heating and cooling, plus air humidifier. The ventilations coils for heating usedistrict heating. Today the ventilation coils use water of 100°C to achieve necessary air demands inthe coating boxes. This part of the report investigates whether the existing system would achievethe air requirements with a water temperature of 75°C instead of 100°C in the ventilation coilsduring the coldest parts of the year.

Ground construction has to a large extent been dominated by traditional meth-ods during the last 50 years. Although the construction has been changed meanwhile innovations are not accepted. In collaboration with NCC Ltd Region South, I have examined a modern con-struction methodology that has been developed by NCC for future large pro-jects. The method is divided into two central phases. Phase 1 is? Single Pro-duction? which is a preliminary period for ground constructions to come.

This bachelor?s project deals with both the problems of high water temperatures in fishponds at a fish-breeding station and of the nutrient load to nearby lakes and streams in Harasjömåla, Blekinge, Sweden. Theory, methods and results of the analyses are presented in the report..

There are records of lowering of the water level in a lot of the Swedish lakes from the middleof the 1700th century. The aim was gaining more areable land to meet the needs of more foodto support the expanding population. In areas with top soil which contents of clay or loam asin the southwest of Scania in southern Sweden this was proven to be a successful wayexpanding the total outcome of the harvest.The studied area in the northeast of Scania, though, consists of morain with a lot of mires -much less nutritious conditions. When the water level is lowered the atmosphere gets accessto the peat. The dissolving of the organic matter that has been suppressed by the lack ofoxygene below water level continues.

?Mechanical debridment ? A studie in irrigation optimization? is a final thesis which was executed by Fredrick Ekman, in close collaboration with the other group member Mikael Johansson, during the spring 2012. The thesis was carried out through Karlstad University Faculty of Technology and Science in the study program of Innovation and Design Engineering (180 ECTS credits). The client of the project was Medilink AB located in Lindesberg, and the contact person was Nils-Erik Söderström, Chief Executive Officer. The project was supervised by lecturer, Lennart Wihk, and examined by lecturer and professor Fredrik Thuvander at Karlstad University.

Forest streams and the associated riparian zones are sensitive to disturbances and changes that occur within these riparian areas. Particularly sensitive are small streams of low order, which will have large impacts down-stream. The disturbances that occur in the riparian zones are reflected quickly in the stream. Driving with forestry machines in the riparian zone will have detrimental effects to the soil and water. Driving the machines will lead to changes in the mineral soil composition, resulting in the reduction of porosity, less infiltration, compaction, and an increased bulk density.

Vattenfall AB is a large producer of electric energy where approximately half of the energy comes from hydropower. Vattenfall Hydropower has got almost a 100-year old history and the company has developed a lot since 1909. After that the number of power plants increased and the competition got more intense, there were higher demands on the reliability. One way to secure the reliability with a good satisfaction at the power plants is to implement a maintenance method named Reliability-Centred Maintenance. RCM is a result of the introduction of the complex aeroplane Boeing 747 in the 1960?s.

Quality assurance means to systematically work for better understanding of the customers needs, demands and expectations. The goal for this study was to investigate how quality can be assured in the job follow up that is made by forestry contractors after soil scarification and planting. The study consisted of a description over the current follow up process at SCA forest AB Jämtlands forest administration, analysis of current follow up situation and an investigation of follow up process made by contractors in other line of business. The first step was a statistical comparison where the own follow up made by contractors were compared with follow up made by SCA them selves over 100 stands. Two soil scarification contractors and two planting contractors carried out the silvicultural measures. The results showed that significant differences between a number of quality factors measured, for example number of approved plants or approved scarification points, average score on stand and number of totally planted plants.