Sökresultat:
4841 Uppsatser om Water model - Sida 4 av 323
Miljö- och hälsoskyddskontorets tillsynsarbete - ur verksamhetsövarens perspektiv
Nanofiltration is a proper way of preparation of drinking water. The process has a lot in common with reverse osmosis where a semipermeable membrane is used to separate a pure water flow from the remaining water. A pilot plant was used to ensure that nanofiltration is a suitable technology for a specific waterworks station in Glemmingebro, Ystad. The purpose was also to find out if a pH-adjustment is needed for feed water in a possible full scale plant. In this case nanofiltration is used mainly to remove sulphate and calcium since the raw water contains concentrations of these substances which exceed the limits for potable water. It is important to receive a high recovery (RC), otherwise the deliviery of water won?t be high enough.
DEHP - från mjukgörare till hormonstörande
Eutrophication is a major problem in the Baltic Sea, as a result of increased loading of nitrogen and phosphorus. In the coastal parts of Östergötland the soil largely consists of clay and contains high levels of phosphorus bound to clay particles. Erosion of the soil in agricultural areas makes the water turbid and transports phosphorus to the Baltic Sea. The aim of this project was to examine the relationship between phosphorus and turbidity in the coastal streams of Östergötland. The aim was also to evaluate the possibility to use turbidity as a surrogate measure for phosphorus.
Balansering av vindkraft och vattenkraft i norra Sverige
This master thesis was initiated with the aim to answer at what level of installed capacity of wind power in the northern parts of Sweden it would be beneficial to improve the transmission capacity from the northern Sweden. During the process of this work the aim has changed to try and create a model that can be used to analyze how well the hydro power installed in the northern Sweden can even out the quick changes in wind power production.To create a good model of all hydro power in northern Sweden is a very large job, unfortunately too large for a master thesis. This report therefore ends with an extensive analysis of the simplifications that have been made and their effects as well as a list of the future work that has to be done.The model that has been created have shown to be effective and produce good results. The conclusions that can be made is that the northern Swedish hydro power have very good possibilities to balance the wind power production. Only a few cases where water have been spilled even though there has been some free capacity has been discovered.
Beräkningsmodell för massbalanser för Slottshagens reningsverk
In the next few years the pollutants loading at the Slottshagen wastewater treatment plant in Norrköping is going to increase due to the reason that one of the waste water treatment plant in the district will be shut down.A survey of how these different pollutants are divided in the treatment process is therefore necessary for mapping out both the loading and treatment efficiency.This can be achieved by studying mass balances.Mass balances were carried out for the water treatment process for the mechanical/chemical,biological and the chemical stage.The mass balance studies show that the treatment efficiency was very good. However in order for the mass balances to be quite consistent and to ensure complete coverage of results and conclusions i.e. more reliable results, sludge samples should be collected and taken at different times per day and the influent rate should be investigated.In this work mass balance has been set up in order to illustrate and identify the factors that should be considered and taken care of for further estimation using mass balances in the future. Furthermore this survey results in a calculating model for the mass balances at thisplant.This calculating model is used as a tool to facilitate future calculations for mass balances for the water treatment process at Slottshagens wastewater treatment plant.Moreover it provides a basis for carrying out further estimation of the treatment process in the near future.In this project the importance of some operating parameters was also taken in consideration.This calculating model can be modified so that calculations of such operating parameters i.e. sludge loading and sludge age can be easily performed.Such information can be used further to evaluate different operation alternative in order to ensure an optimal use of the treatment process with in the plant..
Water balance and nitrate leaching from arable land in a changed climate : a model study
This thesis aims to present the essential background on how to perform climate changeimpact assessments, and to present the results from a climate impact assessment on waterbalance and nitrate leaching for an arable Swedish soil. The soil is a sandy soil in southwesternSweden, grown with spring cereals. This study is meant to be a benchmark example,and cannot be seen as a regional or national assessment for Sweden, rather as an approachto present and analyze the most important parts of these kinds of assessments.A dynamical simulation model (COUP, Jansson and Karlberg, 2004) was used for thisstudy. The model was parameterized and calibrated against data from an experimental site,located in Mellby in Hallands county, south western Sweden. Measurements were carriedout between 1st of April 1988 and 1st of April 1991.
Utveckling av en HBV/PULS-model med sammanfogade markfuktighets- och responsrutiner
Soil properties affect the chemical composition of soil water. When studying transport of chemical substances through a basin, it is therefore important to know from which soil layer the main part of the runoff is generated. The aim of this study is to develop an HBV/PULSE model with merged soil moisture and response routines, which generates good approximations of groundwater levels. It should be possible to extend the model to simulate transport of substances and take into account which soil layer the groundwater level is currently in. The hydrological version of HBV/PULSE is used since there is no need to account for pH or alcalinity at this stage.
INOMHUSMILJÖ I SMÅHUSMED FTX-VENTILATION : EN LITTERATURSTUDIE MED ENKÄTUNDERSÖKNINGAR OCHMÄTNINGAR
This master thesis was initiated with the aim to answer at what level of installed capacity of wind power in the northern parts of Sweden it would be beneficial to improve the transmission capacity from the northern Sweden. During the process of this work the aim has changed to try and create a model that can be used to analyze how well the hydro power installed in the northern Sweden can even out the quick changes in wind power production.To create a good model of all hydro power in northern Sweden is a very large job, unfortunately too large for a master thesis. This report therefore ends with an extensive analysis of the simplifications that have been made and their effects as well as a list of the future work that has to be done.The model that has been created have shown to be effective and produce good results. The conclusions that can be made is that the northern Swedish hydro power have very good possibilities to balance the wind power production. Only a few cases where water have been spilled even though there has been some free capacity has been discovered.
Energieffektivisering av färskvattensystemet på Skärblacka pappersbruk
The purpose of this master thesis was to study the water system for mechanically cleaned water at Skärblacka mill, in order to find and evaluate possibilities of using energy more efficiently. The thesis also includes an evaluation of the software tool ?Pumpanalys?Skärblacka mill produces pulp and paper. The large amount of water required is cleaned mechanically through filters and called mechanically cleaned water (MR0). The MR0 water is pumped out to the factory by four crude water pumps.
Mänsklig påverkan på mindre vattendrag i skogslandskapet : en inventering av vägtrummor och skyddszoner kring dessa i Uppsala län och norra Västmanlands län
Interference in an ecosystem means a disturbance. When harvesting, forest roads have to be
build to cope with heavy duty vehicles. Crossing brooks can not always be avoided. In this
case bridges or culverts have to be built. There are many different kinds of culverts and
depending on what type you choose and how you place the culvert, the watercourse and the
water organisms can be harmed in different ways.
Zenbuddhistiska meditationsträdgårdar - för ökat välbefinnande i Sverige
This paper is intended to provide a picture of which associations water can wake in the human
mind from the perspectives of garden history as well as from that of environmental
psychology. I hope to paint a fairly broad picture of our perception of water that can serve as a
basis for discussion and as a starting point for different forms of design work in landscape
architecture. The historical perspective emphasizes the importance of water as a condition for
the emergence of gardens and in a wider perspective the importance of water in early cultures.
Also, I describe a picture of how water has been used throughout the history of gardens from
early Egypt to the baroque era. The garden history analyzed from an art historical perspective
gives a picture of human associations to water, and the history behind these associations is
presented. As a compliment to the art history approach, I have chosen to highlight our
associations with water from the perspectives of environmental psychology and evolutionary
science.
Förslag till placering av anläggningar för att förbättra vattenkvalitén i Tidan
Considering water quality, landuse and reducion of wetland area in the watershed of Tidan, areas witch are in need of constructions to improve the water quality are identified. Constructions are suggested to be located within the smaller streams in the watershed, so that the water is treated before it reaches the stream Tidan..
Vattenlogistik vid stubbehandling i slutavverkning
Water logistics has long been a problem in order to effectively carry out stump treatment in both thinning and final felling. It is important that the stump treatment?
equipment is configured as well as a sufficient amount of water is carried out on the harvester to get a cost? effective treatment. The flow control of the equipment has improved and water can be dispensed more efficient, but still the amount of water on the machine is a crucial factor in the total cost estimate.
The knowledge of the tools available to bring water as well as the internal logistics of loading and transport to the felling site is deficient. Increased focus on "smart" solutions to manage water cost is of great importance in order to combat Hetrobasidion spp in both thinning and final felling.
The purpose of the study is to describe and summarize different solutions of water logistics at stump treatment in final felling.
Analys av off-design prestanda för ett absorptionskylsystem
This master thesis project at KTH is performed in the Mechanical and Aerospace Engineeringdepartment at University of Florida (UF). The thesis is a small part of a gas turbine researchproject where a vapour absorption refrigeration system (VARS) and a high pressure regenerativeturbine engine (HPRTE) are integrated together. The main objective is to build a computermodel of the VARS. The computer model is supposed to be used to analyse the off-designperformance of the VARS and should also be easy to integrate as a subroutine in a more complexsystem model. To model the VARS some knowledge of the absorbent/refrigerant mixture had tobe well known, in this case a mixture of ammonia and water.
Förslag till placering av anläggningar för att förbättra vattenkvalitén i Tidan
Considering water quality, landuse and reducion of wetland area in the watershed of Tidan, areas witch are in need of constructions to improve the water quality are identified. Constructions are suggested to be located within the smaller streams in the watershed, so that the water is treated before it reaches the stream Tidan..
Computer Modelling of the Influence of Surface Topography on Water Repellency and a Study on Hydrophobic Paper Surfaces with Partly Controlled Roughness
A computer model based on minimization of the free energy, capable to predict contact angles and spreading transitions between Wenzel and Cassie mode for drops placed on surfaces with different topography were implemented in matlab. Simulations were compared with experiments documented in the literature. These showed that reported transitions between Cassie and Wenzel mode can be explained by minimization of the free energy. In this report, a study on the possibility of constructing water repellent paper surfaces with a combination of treatment with octadecyltrichlorosilane and topography changes, is included..