Earlier studies of musculoskeletal problems with milkers working in milking parlour operators have shown that it is a physically demanding occupation. The extremities that are most exposed are neck, shoulders, hands and wrists. Those systems that have been studied in present cases are fishbone and some tandem barns. There have been changes in the working environment during the past ten years. The mechanisation has been developed for the better with automatically removers of the milking units and vertically adjustable floors in almost every daily milking barn. In other hand the milk production are more industrialised and more related to stress today.

SUMMARY The purpose of this study was to explore how nurses in the emergency department experience and cope with stress in their workplace. The study had a qualitative, descriptive approach and was based on nine individual, semi-structured interviews. They were then processed using content analysis. The content analysis of interviews resulted in two categories, "the nurse's experience of stress," "the nurses coping with stress." Together, the categories highlighted how nurses experienced stress during and after their shifts. The study showed clearly that all nurses experienced and coped with stress in their daily work activities..The authors noticed that stressful time for the nurses were repeated at each session and were similar in character.

Vaccination of fish can be assumed to cause pain. This study was designed to see if we can minimize the suffering of fish following vaccination. Fishes are cold-blooded animals and thus more primitive than warm-blooded animals. Despite this, many organs, e.g. the nervous system, have the same basic structure as that of other vertebrates. The fibre system for conducting pain is more diffuse than in humans.

The aim of this study is to illustrate, and analyze how social workers are able to more effectively pursue operative possibilities within their own particular organizations. The main question concerning this issue is: How are social workers, working within the same district organization able to realise any potential for co-operation with other social workers, in different locales and units, yet working within the same organization? Following on from this question, further issues arise such as: 1. How do the varying demands of the clients affect the workload of the social worker? 2.

Mankind has always been communicating, it is almost impossible to not communicate. The communication tree has grown a new branch, the environmental communication branch, and an ISO standard, the ISO 14 063 Environmental communication- guidelines and examples was issued October 2006. The purpose of this thesis is commissioned by the managing director of NQA Nordic AB in order to examine and analyse how organisations communicate environmental issues today, and how big the need for ISO 14 063 actually is, and further more if there are needs and wishes to make ISO 14 063 a certifiable standard. The main conclusion is that the there is a need for the standard, but it is difficult to say in which form since the knowledge about the standard is far to low among the organisations examined in this thesis. Clarity and transparency as ISO 14 063 promotes are important ingredients in organisations? environmental work, so sure a standard for environmental communication can help improve environmental performance, for example through opening up for two-way communication and from that on take part of the stakeholders? opinions.This study is based on a literature study and a questionnaire survey where 70 organisations (in this case authorities, corporations and non-governmental organisations) randomly chosen from the seven criteria, which ISO 14 001 defines as the environment: land, water, air, flora, fauna, natural resources and man and his collaboration with those.

Waste appears to be a low-cost fuel compared to biofuel. This Masters thesis was conducted for Vattenfall Utveckling AB and deals with how waste in the fuel affects the performance of a SCR-catalyst. Different mechanisms of deactivation were surveyed, focusing on the poisoning mechanism. A literature study was carried out, which was used as a reference when analysing the results.Small samples (9x2x2 cm, 64 pieces) cut out from a full-scale unused honeycomb catalyst were exposed up to 1500h in two different combustion plants, Johannes in Gävle (co-combustion) and Högdalen in Stockholm (waste-combustion). The activity was measured mainly at 300°C but also at 250, 350, 375 and 400°C.

In the year 2010 a transition will take place here in Sweden from the present rules how to dimension buildings in to the common rules with have been developed in Europe, the Eurocodes. Eurocode is the term for a collection standard that contains calculation rules in how to dimension constructions and buildings. They are developed by the European standardize committee.The purpose with this examination work is to get an insight of what changes this will contribute to, and how it will affect the dimensioning. Are there going to be any differences in the dimension you finally chose?To investigate these possible differences two constructions will be calculated first in the present Swedish rules, and then in the coming eurocodes.One of these two constructions will be build completely in steel, while the other will be build completely in concrete.

BACKGROUND: Chronic Obstructive Pulmonary Disease (COPD) is a slow progressive disease affecting the family caregivers by limiting their lifestyle. Subsequently the situation can be experienced as stressful for both the afflicted and the relatives. To easier understand the needs of the caregivers of family members suffering from COPD have, it is important to get an insight into their experience of every-day life, so that medical staff can help, support and promote their health according to their needs. AIM: To illustrate caregivers? experiences of living with a family member suffering from Chronic Obstructive Pulmonary Disease.

This report describes a study of two different methods to achive the best possible result in setting out apartment details. These two methods are the setting out of details with a measuring tape from baselines and the setting out procedure with an instrument (totalstation).Through our knowledge in surveying and mapping technology and help from a carpenter, this investigation has been implemented. The setting out using a tape has been performed by letting the carpenter to set out windows, bathroom and water- and drain-details from baselines and drawing. The setting out using a surveying instrument was carried out by means of a Trimble Total Station. These two methods have been compared in order to detect and show the difference that occurs.The report shows the investigation background story from the practice of Swedish Mätcenter in Karlstad.A result of differences in accuracy and time is described in the report, as well as their theoretical consequences.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

Open pit mining creates huge amounts of tailings and waste rock deposits. Due to it's content of sulphide minerals, predominantly pyrite (FeS2), there is a risk of oxidation and formation of acid water containing heavy metals, known as Acid Rock Drainage (ARD). To prevent the process of oxidation, the tailings and waste rock have to be reclaimed. The most commonly used methods of reclamation are a coverage of water or soil. Mining also results in a large-scale interference in the landscape that will make an eternal change of its appearance.

The aim of this project was to look into ten small sewer systems in the municipality of Laholm, in Sweden, in order to work out common assessment grounds for them. The sizes of the systems for purification of wastewater were within the range of 25 to 2000 population equivalents. Our method was to study literature, the laws and regulations applicable and the files at the municipality. The conclusion is that every sewer system is different and every situation is unique. We concluded that based on laws and assessment grounds sewer systems equal in size and pollution load ought to have similar demands attached to them.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

Syftet i detta examensarbete är att få en inblick i hur förskollärare/barnskötare planerar och stödjer barnen i deras sökande efter olika matematiska begrepp i lek med vatten. Vi har gjort en tvärvetenskaplig undersökning på fyra 1-3 års avdelningar, som är baserad på ett hermeneutiska tankesätt där vi har tolkat förskollärarnas/barnskötarens agerande vid vattenlek. Vi har använt oss av kvalitativa undersökningsmetoder i intervjuerna och observationerna. Resultatet i vår undersökning visar att förskollärarens/barnskötarens egna kunskaper i matematiska begrepp, planering av aktiviteten, förståelse för barnens kunskaper är viktiga för vidareutveckling av barnens matematiska begreppsbildning.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.