The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

The Kedertruss is the loadbearing part in the Keder weatherprotectionsystem and it has been analyzed concerning its loadbearing capacity. The Kedertruss is produced and manufactured by Wilhelm Layher GmbH & Co. KG and this report has been made for their Swedish division Layher AB.  The Kedertruss, designed in Germany according to German designcode, has been recalculated concerning Swedish conditions according to Eurocodes and a ongoing European standardization project. The two-dimensional program Winstatik Frame Analysis has been used for evaluation of load effects. Capacity has been calculated by hand-calculations and it has been verified that the Kedertruss in its larger spans isn?t able to withstand the loads.

The purpose of this paper is to make an analysis of the urban Roman water system. I have chosen to work with the system as a general field, not as a case study of a single town. In my opinion such a study would not give a proper and fair view of the subject. Therefore, this paper will discuss the different parts of the system, each one for itself and name examples wherever possible, to give a wide survey of the reality of the Roman water supply system. The aim is to give the reader a clear picture of different solutions used in the time of the early Roman Empire and a good understanding of the subject..

Combustion of fossil fuels is today the dominating source of energy. During combustion,carbon dioxide is formed. The carbon dioxide accumulates in the atmosphere,which raises the global average temperature on earth through the so called greenhouseeffect. The only way to reduce the emissions of carbon dioxide from combustionin a coal fired power plant is through carbon capture and storage (CCS).Post-combustion capture is a technology to separate carbon dioxide from the uegas after the combustion for efficient transport and storage. The steady state operationof coal fired power plants with post combustion capture has already beenthoroughly investigated on a pilot scale, however much work remains to investigatethe plants dynamic operation.

The EU's Water Framework Directive aims to a long-term and sustainable use of our water resources and wants to ensure good water quality in Europe's water bodies. Discharge of polluted stormwater into receiving waters can be a threat to their ecological and chemical status. Municipalities are responsible for supervision of the environmental quality standards (EQS) and therefore need to gain knowledge of current stormwater management, the expected level of pollution emissions and possible appropriate purification steps to ensure that the goal of good water quality is achieved.This master thesis aims to provide this knowledge in the example case of Vallentunas urban area and wants to prepare future oversight so that it can be assessed how much the discharge of polluted stormwater into the local receiving water is a threat to its status. With the help of maps, aerial photographs, site observations and individual discussions those areas are mapped where appearance of moderate to highly polluted stormwater could be suspected. The degree of pollution at the discharge points is determined based on land use upstream and uses standard values according to the administrators assistance "Tillsyn av dagvatten" (MSL 2014).The study identifies 100 areas in need of supervision regarding their stormwater management.

Skärgårdsstiftelsen, which is responsible for several of the archipelago islands in Stockholm, has chosen to explore the possibilities for more sustainable heating systems in buildings on the islands in collaboration with KTH. A reduction of energy use and improving the efficiency of existing heating systems are included as part of the environmental work. This report studies the island of Grinda, which is located outside the area of Vaxholm in Stockholm. The study area consists of a guesthouse consisting of a restaurant as well as conference facilities and four neighboring cottages used for overnighting. The cottages now run solely on direct electricity, both for heating and hot water.

Billions of children, women and men lack access to safe water supplies, whichputs the affected in both social as well as economic despair. This paper willpresent some of the conclusions leading Non Governmental Organisations suchas the UN has presented recently concerning the terms of sustainability. Much ofit is true and important, but nothing can be done without extended cooperationbetween nations worldwide to find arguments that prevent short-term thinkingand economic wealth on the behalf of future sustainability.With a growing population and an increased competition for fresh water, theworld will soon face a severe shortage of good quality water for irrigation. This isbecause the distributions rarely match the demand, neither in Australia nor inAfrica. Important to notice is the major factor that the degradation of theenvironment is not one country?s problem to solve.

The Kedertruss is the loadbearing part in the Keder weatherprotectionsystem and it has been analyzed concerning its loadbearing capacity. The Kedertruss is produced and manufactured by Wilhelm Layher GmbH & Co. KG and this report has been made for their Swedish division Layher AB.  The Kedertruss, designed in Germany according to German designcode, has been recalculated concerning Swedish conditions according to Eurocodes and a ongoing European standardization project. The two-dimensional program Winstatik Frame Analysis has been used for evaluation of load effects. Capacity has been calculated by hand-calculations and it has been verified that the Kedertruss in its larger spans isn?t able to withstand the loads.

Tomo Hugglink (TOMO Skog) is an innovation for harvest and transport of biofuels. The system consists of a truck, a chipping unit and crane mounted on a link and a wood chip trailer. The system works in such a way that the chipping unit is disconnected and placed on the site and wood chips are loaded directly into the wood chip trailer.The aim of this study was:- To examine the performance of the TOMO Hugglink system under different conditions such as the size, placement and quality of the pile.- To calculate the cost per raw ton for two vehicle combinations at different transport distances and to examine the effect of a reduction in set-up time and an increase in load weight.- To identify possible improvements with the TOMO Hugglink system.A time study was conducted within the thesis work to make it possible to determine production and time consumption. In the subsequent economic analysis the cost per tone at different transport distances was calculated for two different lorry concepts. Furthermore the effect of a reduction in set-up time and an increase in load weight was calculated.Under current conditions the utilization of the chipper is low and only 29 % of the total system time is occupied by chipping.

A pavement construction designed to cope with the different type of traffic loads; it is exposed to and at the same time it can resist the effect of the climate. A road structure consists of sub- and superstructure which is divided by a boundary known as terrace. During the construction of unbound layers (base course and sub-base course) in the superstructure, it is always ensured that the material meet the requirements for bearing capacity and the degree of compaction. These parameters are controlled by various laboratory tests and control methods. To obtain increased knowledge of the material and improve the quality of the compaction in the field, it is necessary to perform laboratory tests in order to determine material properties.A base course material 0/ 32 mm limestone from Gotland (Hejdeby) was investigated in this study.

Water related problems are highlighted as a challenge to sustainable development and the topic of forests and water is gaining increased attention worldwide. Governing forest and water is a complex issue, as the interactions are affected by policies and actors from multiple levels and sectors. In Sweden, forests cover much of the land and forestry is an important land-use, inevitably impacting the water in the landscape. This study aims to understand and explain the existing governance framework around forestry and water in Sweden. Based on the Policy Arrangement Approach, the study?s research questions focused on the actors involved, the formal and informal rules, the resources and power structures and the discourses related to forestry and water in Sweden.

This essay aims to explore continuity in water centric cult within the period of the Christianization of Scandinavia (ca 800-1100 AD) and to understand the changing of symbolism of water in pre-Christian cult and early Christian religion. It has previously been thought that Christian priests took over the old holy wells and renamed them after saint, all to ease the pagan people into a Christian lifestyle. But archaeological evidence shows that the cult at these wells, and other water centric sites, where almost completely abandoned a few hundred years before the Christians came to Scandinavia. The Christians should not have felt the need to transform this tradition since it was only practiced in a very small and supposedly private scale. On the contrary, religious activities at these wells seems to increase with the new religion and perhaps this is explained by Christianity itself.

Water hardness indicates the concentration of calcium and magnesium ions in water. Water with high concentrations of these ions is described as hard water and water with low concentrations is described as soft water. Water that is too hard or too soft can lead to technical and economical problems. In collaboration with Midvatten AB, groundwater hardness in the Badelunda esker between Leksand and Avesta has been mapped, and an attempt has been made to explain the variations. For this purpose, different GIS programs, such as ArcView, ArcInfo, IDIRISI, and one geochemical modelling program, PHREEQC, has been used.

In this study potential health risks for employees in connection with handling of bottom ash and bottom ash water at a Municipal Waste Incineration (MWI) plant have been investigated. Air surrounding the bottom ash and the bottom ash water has been examined. MWI is one of the primary ways to manage solid household waste, and bottom ash is the main solid residue produced by the incineration process. Bottom ash constitutes about 15-20% of the original waste. The bottom ash is extinguished in a water bath (bottom ash water).The study was carried out in a MWI plant in Karlstad, Sweden.

AbstractThe purpose of this study is to find out how pupils give expression of a water cycle model and if the model causes any misunderstanding. Two problems constitute the starting point for this investigation. The first question is: how do the pupils explain the water cycle with the help of the jar model (can of glass). The other question is: can the children see any similarities between the can of glass and our earth. Qualitative semi structured interviews with seven pupils in the ages of 8-9 have been used to show the pupils? own thoughts and how they express them.