This master thesis is commissioned by Permobil AB. The report describes thoroughly the developing process of an adjustable backrest for wheelchairs. The target group for the backrest are people that suffer from scoliosis or other spinal diseases. Because of insufficient pressure distribution usage of traditional backrests is not an option for them.The current solution has got a frame that is made by several adjustable links that is held in place by friction. Between the links velcro tapes are attached that is adjusts the depth.

This bachelor essay is divided into two parts, the first being a construction of a single-familyhouse and the second an in-depth study of five different isolation materials, analysed from anenergy perspective.The first part, the construction of the single-family house, has been created from knowledgeacquired during three years of studying at KTH Royal institute of Technology in Stockholm, inthe program Architecture and the Built Environment. The constructed house is a one-floorhouse of 137m2with façade plaster, situated in Borlänge, Sweden. The house has a wooden framewhich is built on a on sight cast concrete foundation, on the ground. The house?s roof is a gableroof, which has an angle of 24 degrees.

The low bearing capacity of roads during the spring thaw and periods in the autumn leads every year to increases costs for Holmen Skog. To reduce costs and increase accessibility Holmen Skog decided to install and test a CTI-system. Central tire inflation (CTI) is a system that makes it possible to monitor and vary a vehicle?s tire inflation pressures from the cabin, while the vehicle is in motion. When tire pressures are reduced, the area of the contact surface between the tire and the road increases, thus reducing the ground pressure. The purpose of this study was to evaluate the CTI-equipped vehicle and analyze if the CTI technology is economical defensible during the thaw 2005.

The aim of this project was to improve taste of a liquid food product, comprising extremelybitter and unpalatable amino acids and one unrevealed ingredient. The amino acids were Lleucine,L-isoleucine, L-valine, L-threonine and L-lysine monohydrochloride. Experimentaldesign was set up as a screening of water solutions comprising these ingredients (called BCAAsolutions) and added ingredients with potential to improve flavour. BCAA solution withingredients that were potential bitterness suppressors were evaluated in flavour, bitternessand/or palatability. Solutions of separate amino acids were also studied.

This report describes how the system may be exposed to oscillations and how this can lead to resonance. Resonance is a phenomenon that occurs when a system is affected by external periodic oscillations with frequencies close to the system's natural frequencies. Structures subjected to resonance can risk great damage and destruction, why resonance is something that is important to take into account when designing structures. Alternative ways to counteract resonance is to supply damping in the system. Damping means that the resonance decreases instead of letting the amplitude increase.The report discusses some examples on constructions that have experienced the effect of resonance.

This master?s degree project concerns the combination of a multi dwelling passive house with solar energy for the generation of electricity and domestic hot water (DHW). Different alternatives with either solar thermal systems or photovoltaic (PV) systems are compared with two reference alternatives producing DHW from electricity or district heating. The economical comparison uses a life cycle cost (LCC) perspective based on the present value of expenditures for investment, energy and annual operating and maintenance.The energy yields from the solar energy systems were calculated by hand and with simulation software. Calculation and dimensioning of PV systems were carried out with a software called PVSYST.

We are more aware than ever about our impact on the common environment and the world's population. Consumption awareness can be one way to take social and environmental responsibility. This study aims to examine young adults' (19-30 years) attitudes toward consumption awareness in Sweden. Consumption awareness is treated in this study as the consumption of environmental and fair-trade labeled products that have been certified of a third party. The study is limited to everyday commodities, which in this case is groceries, household consumables and clothing.

To create multifunctional buffer strips along a watercourse in an economically sustainable way requires consideration of many different factors. In this plan we have selected pollutant reduction as the main purpose of the buffer strip. We have also strived to achieve minimal income loss due to reduced production, increased biological diversity, good game preservation that leads to higher income from hunting, aesthetical satisfaction and possibility to profit from available subsidies. This is done mainly to make landowners/farmers more interested in creating buffer strips along water courses.As sand is the dominant type of soil in the area, the water course is less affected by surface runoff compared to if the soil would be clay or some other finer texture. Game preservation and subsidies have therefore been the main factors when establishing the width of the strip, because these require wider buffer strips in some cases.

This report describes how the system may be exposed to oscillations and how this can lead to resonance. Resonance is a phenomenon that occurs when a system is affected by external periodic oscillations with frequencies close to the system's natural frequencies. Structures subjected to resonance can risk great damage and destruction, why resonance is something that is important to take into account when designing structures. Alternative ways to counteract resonance is to supply damping in the system. Damping means that the resonance decreases instead of letting the amplitude increase.The report discusses some examples on constructions that have experienced the effect of resonance.

This report describes how the system may be exposed to oscillations and how this can lead to resonance. Resonance is a phenomenon that occurs when a system is affected by external periodic oscillations with frequencies close to the system's natural frequencies. Structures subjected to resonance can risk great damage and destruction, why resonance is something that is important to take into account when designing structures. Alternative ways to counteract resonance is to supply damping in the system. Damping means that the resonance decreases instead of letting the amplitude increase.The report discusses some examples on constructions that have experienced the effect of resonance.

More often consumers demand instant dry soup that can be prepared with a water temperature below 100o C, which is currently not possible, because the dry soup becomes too thin when using water with a lower temperature. In this study, various kinds of starch studies were made to optimize the starch used in the existing product to make it more viscous at both high and low temperatures. The result was that one of the two starches present in the existing product was retained by change in quantity as it contributed to important flavor parameters. The second was removed and replaced with a starch that made the product more viscous at lower temperatures. To find out if the new product differed from the existing product a viscosity measurement and a sensory paired preference test were made.

People who live in northern part of the world spend much more time indoors than those who live in warmer countries. In addition that home should be safe, it should also protect one against heat, cold, sunlight and pollution. The indoor environment is affected by installations, material and how the building is formed. Those anomalies that are visible, felt or smelled can be noticed and be rectified. But it?s much more difficult if these abilities are missing.

The main purpose with the project has been to approximate the magnitude of the pollution transport from the actual road surfaces and to get an approximation of the possibility to collect the pollutants to reduce the load to the water and improve the water quality.The quantity of pollution transport from the most trafficated roads areas in Örebro city has been calculated. Roads whith a traffic exceeding 10 000 vehicle/day. The study has been done with the calculation tool StormTac. Through analysis of traffic loads and road surface, which together with a different kinds of parameters gives an approximation of the pollutant transport.The calculation has included some metals and other substances in the stormwater and has also included the present of suspended solids. Included the overall study, some smaller areas has also been calculated for the possibility to remove pollutants.The work also includes calculation for three different areas for stormwater treatment.

This study explores the effects of two different post-treatment methods on stain reduction in glazed creamware from the late 20th century. The objects stains have been characterized by type one and type two stains which is the result of prolonged contact with food residues, were subjected to the same initial stain reduction. The two post-treatment methods examined are soaking the objects in deionized water and surface rinsing with deionized water. The comparative analysis included photographs under normal and UV-light exposure to assess stain visibility, weight measurements before and after treatments to monitor the absorption and evaporation of liquids, and observations throughout the experiment. The results revealed that while type two stains showed significant alterations after treatments, specifically after soaking, type one stains remained unaffected by both methods.

To create multifunctional buffer strips along a watercourse in an economically sustainable way requires consideration of many different factors. In this plan we have selected pollutant reduction as the main purpose of the buffer strip. We have also strived to achieve minimal income loss due to reduced production, increased biological diversity, good game preservation that leads to higher income from hunting, aesthetical satisfaction and possibility to profit from available subsidies. This is done mainly to make landowners/farmers more interested in creating buffer strips along water courses. As sand is the dominant type of soil in the area, the water course is less affected by surface runoff compared to if the soil would be clay or some other finer texture. Game preservation and subsidies have therefore been the main factors when establishing the width of the strip, because these require wider buffer strips in some cases.