Worldwide consumption of cheese has increased over the years. The average Swede consumes somewhere around 20 kilograms of cheese per year, which is an increase of a 100 % over the past 50 years. One of the most popular kinds of cheese during the past decades is mozzarella, due to its? use as pizza cheese. Flavor and consistency differ between the traditional kind, made out of buffalo?s milk, and the industrially made kind, made out of cow?s milk.

This graduation thesis is about baths and beach like places in city centers. It focuses on recreation and the creation and development of public, social spaces in the city containing water as a visual and useable element. The thesis is divided into three parts; background, inspiration and application. The background examines four factors which we consider important for the occurrence of inner city baths; water, the history of bathing, inner city recreation and social life in public places. A discussion of the (future) importance of inner city baths and beach like places' is then presented. The inspirational part is divided into examples of existing places and examples of types of places. The first is used in an attempt to examine the function and importance of inner city baths and beach like places as well as the opportunities and challenges associated with them. The latter contains a presentation of six categories developed by us to facilitate the planning of inner city baths and beach like places.

Obesity and overweight are today classified as one of the largest epidemics in the Western world and is threaten a large part of the population. As a reaction to this a major health trend has emerged in recent decades. Every day consumers are exposed to information from the media about what is healthy or unhealthy to eat and the recommendations change frequently.There is great interest in healthy food on the Swedish food market, but still healthy foods only represents a small proportion of the total food sales. The essay examines the gap between the current and potential demand for healthy food and if it can be explained by any of the following factors: lack of information, price, taste or cognitive behavioral.To study these questions a quantitative method have been used and 213 questionnaires were collected. The intention is to draw general conclusions about the entire population.

Slopes in fine till soils are exposed to surface erosion due to rainfall, snowmelt and upland water sources. Large areas of road slopes are therefore covered for surface erosion protection. Preventive methods like ditches and trenches are also being used. Silt tills are particularly troublesome since the water can bring the soil into suspension and cause mudslides. Different methods for erosion protection have been studied in this work, with the emphasis placed on rockfill covering. The need for and the dimensioning of this type of covering has been examined in literature and field studies.

This master thesis was initiated with the aim to answer at what level of installed capacity of wind power in the northern parts of Sweden it would be beneficial to improve the transmission capacity from the northern Sweden. During the process of this work the aim has changed to try and create a model that can be used to analyze how well the hydro power installed in the northern Sweden can even out the quick changes in wind power production.To create a good model of all hydro power in northern Sweden is a very large job, unfortunately too large for a master thesis. This report therefore ends with an extensive analysis of the simplifications that have been made and their effects as well as a list of the future work that has to be done.The model that has been created have shown to be effective and produce good results. The conclusions that can be made is that the northern Swedish hydro power have very good possibilities to balance the wind power production. Only a few cases where water have been spilled even though there has been some free capacity has been discovered.

It´s important when you are about to build a new stable or just increasing your production that you choose the right housing system and that it fits your own farm. In this study I have put together facts about different housing system for fattening bulls in order to get a clearer picture of witch system is the most suitable for my own farm depending on the conditions I have. The background of this work is my own interest for breeding bulls and I will hopefully increase my own production. Due to this I wanted to learn more and increase my knowledge about different housing systems. Through a literature study I have found out the facts about the housing systems I find suitable for housing bulls.

The purpose of the study was to describe hemodialysis patients self-reporting salt habits associated with cooking and food intake. Furthermore, the purpose was to investigate possible differences in inter Dialyze significant weight gain at low and high self-reported salt consumption. The study was an empirical descriptive study of comparative features and consisted of a convenience sample from two hemodialysis units in southern Norrland. Study group consisted of 37 persons who had been ongoing hemodialysis treatment and their age ranged from 42-86 years. A questionnaire was used in two parts and both parts contained 15 foods.

The aim of this study was to evaluate the effects on a simulated wastewater plant regarding GHG emissions and use of energy and resources when implementing source separated wastewater systems. The effects were studied for different restrictions of effluent quality and for different temperatures on the influent. The simulation model BSM2G calibrated for Käppala wastewater treatment plant was used. The task was executed by simulating nine different scenarios with an increase in influent load from new connections equivalent to 3, 10 and 30 % of the present connections. These new connections were served by conventional, urine separated or black water separated systems.

Naturskyddsföreningen gav författarna uppgiften att undersöka förekommande viskosprocesser och alternativa regenereringsprocesser, detta för att identifiera hur hållbara de är ur ett miljöperspektiv och vilka processer som går att applicera på bambu. Detta för att se möjligheten att märka bambuviskos med Bra Miljöval och för att klargöra frekvent uppkommande frågor angående bambuviskos. Syftet är att se på de olika processernas kemiska innehåll samt vilka utsläpp de orsakar till luft och vatten. Ett delmål med rapporten är att den ska kunna användas som material vid vidareutveckling av kriterierna för Bra Miljöval Textil. Resultat som erhållits vid jämförelser av studerad litteratur är att de betydande faktorerna för miljöpåverkan från massaframställningen samt viskos- och lyocellprocessen beror av: använda kemikalier i processen, energianvändningen och vilken typ av energi, möjligheten till rening av utsläpp till luft och vatten samt återvinning av energi och kemikalier.

As energy prices skyrocket and the environmental issues become more frequently debated, interest in energy-efficient buildings has increased sharply in the past decade. Because of this, the interest to achieve high air tightness in building envelopes have once again awakened, due to a good air tightness contributes to lower energy consumption in several ways and to a healthier indoor environment.As the regulations for energy consumption and controls of achieved air tightness has tightened considerably in recent years, the work regarding sheets for air tightness changed significantly for construction contractors. This thesis includes a study that aims to detect what kind of manuals, recommendations or instructions contractors working according, and how a number of randomly selected construction companies in Halland, Sweden, are dealing with the matter of high air tightness of the building envelopes. The study also includes a knowledge inventory of supervisors, site managers and skilled workers, and what their opinions and attitudes are like towards work regarding the sheets of air tightness. The results have been compared with a similar survey dated to 2004, conducted by the SP Technical Research Institute of Sweden in collaboration with Chalmers University of Technology.

A pavement construction designed to cope with the different type of traffic loads; it is exposed to and at the same time it can resist the effect of the climate. A road structure consists of sub- and superstructure which is divided by a boundary known as terrace. During the construction of unbound layers (base course and sub-base course) in the superstructure, it is always ensured that the material meet the requirements for bearing capacity and the degree of compaction. These parameters are controlled by various laboratory tests and control methods. To obtain increased knowledge of the material and improve the quality of the compaction in the field, it is necessary to perform laboratory tests in order to determine material properties.A base course material 0/ 32 mm limestone from Gotland (Hejdeby) was investigated in this study.

An analysis of a specific application of anaerobic wastewater treatment at a pulp and board mill, Stora Enso Skoghall, was carried out. A literature study was done and effluent wastewater from CTMP pulp production was analyzed. The analysis consisted of a broad constituent analysis and an anaerobic treatment trial. Results from these test where used to calculate the treatment effectiveness and resulting energy potential at the mill.The literature study and constituent analysis showed that toxicity of the water to be treated, due to wood extractives and sulphur content, was of concern. Detoxification chemicals targeting these constituents where used in the anaerobic treatment trial.

ITT Water & Wastewater (före detta ITT Flygt) tittar på att eventuellt genomföra en förbättring av ytbehandlingen av deras pumpar för att eliminera de rostangrepp pumparna utsätts för idag. Examensarbetets uppgift är här att analysera och beskriva miljöeffekterna av de nya ytbehandlingsmetoderna som företaget undersöker.Målet med studien är att få fram ett underlag och en rekommendation om vilken ytbehandlingsmetod företaget bör välja ur miljösynpunkt.De olika metoder som studerats är:? Järnfosfatering + ED-lackering? Zinkmanganfosfatering + ED-lackering? Oxsilan + ED-lackeringDessa metoder har jämförts med nollalternativet, vilket innebär att samma metod som tillämpas idag fortsätter att användas.Miljöeffekterna som studerats för de olika metoderna är:? utsläpp till luft och vatten? avfall? energiAv de tre nya metoderna samt nollalternativet är Oxsilan följt av ED-lackering det alternativ som ger minst påverkan på miljön. Metoden har inga utsläpp av flyktiga organiska ämnen till luft, inget farligt avfall bildas och det avfall som ändå bildas är litet. Metoden har även lägre energiåtgång än de andra studerade metoderna.2008:Nr 2 Teknik.

This thesis examines the effects of electricity visualization in an office building. The subject was investigated through the creation of a web based visualization tool that was made accessible to the about 1500 employees in a large office building. The visualization was available for three weeks. During this period interviews, user studies and observations took place in order to evaluate what, if any, effects the visualization had on the attitudes and behaviors in the office. Electricity use data was collected and analyzed to see if the project had a statistically significant effect on the electricity consumption in the office.The results from the interviews and the data analysis indicate that no reduction in electricity consumption took place, and a number of factors that could increase the chances of success were identified.

The report describes a measuring method for analysis of energy consumption measurement in microwave ovens. Concurrently that the awareness of the environment evolves the demands are growing for more power saving products. This is also counting within the Home Appliance business, which is Whirlpools business area. Whirlpool is therefore interested of launching microwave ovens with documented low power consumption. To be able to implement this, both asserted measuring equipment, that fulfils all demands, and a standard procedure is required.