Wastewater handling of private sewage systems has become an all increasing matter. In Stockholm region the 90 000 private sewage systems contribute with larger phosphorus flows to the Baltic Sea than the two biggest sewage plants in the area, Henriksdal and Käppala, contribute together, even though these two plants purify wastewater from more than one million inhabitants. When summer house areas turn into areas for permanent living ? transition areas ? the load on the existing systems increases, systems that already often are unsatisfying. In those areas it is not clear what the best system choice is; On-site systems for single households; Local collective systems or Connection to central systems.

The aim of my thesis is to obtain knowledge of textile wastewater and textile sludge from an environmental perspective, which can be used as a basis for the  ?Sweden Textile Water Initiative? guidelines for a sustainable sludge management. In my study I have mainly focused on textile dyes, salts and metals and their routes during wastewater treatment.This paper is partly a literature review, which I began by identifying the pollutants discharged from each textile process. Then I studied wastewater and sludge quality, environmental aspects, possible treatment and recycling methods. I have also tried to find existing type of guidelines in order to make comparisons.

This report summarize what have been done during the Master of Science Thesis that Klas Schjelderup has written for the company RANOTOR Utvecklings AB. The company is developing modern steam engines and this work should develop a machine to perform tests on a new type of piston seal that hopefully could be used in the future. The steam engines will be both volumetric and energy compact, around 1600hp/literof cylinder volume, and it will have a lot of practical applications.The new type of piston seal is hydrostatic lubricated which means that a fluid is separating two faces that normally is in contact. In this case pressurized water is used to separate the piston seal from the cylinder wall. RANOTOR have earlier formulated that at least the expander in the modern steam engine have to be oil-free, due to other components functionality in the closed water system.

The interest for children´s clothing has increased in society. More and more children are born and parents are older when they have children. Education has become a natural feature in most people´s life, just as both parents often work today. The households have therefore better economy and thus greater consumption opportunities. Parents are, in greater extent, looking for personal and different clothing with focus on quality and, to some extent, exclusivity rather than just a cheap and functional garment.

Francisella tularensis, the causative agent of the zoonotic disease tularaemia, is highly contagious and potentially fatal for a wide range of wildlife species of the northern hemisphere, also humans. Although recognized as a pathogen for over 100 years, much still remains to be elucidated concerning the ecology and transmission of the bacterium, hence this literature overview aims at compiling data regarding the aquatic association and the role of mosquitoes in transmission of Francisella tularensis subspecies holartica, the sole subspecies in Sweden. While a linkage between the bacterium and natural waters stands beyond dispute, there is no consensus in the literature concerning its potential as a reservoir. However, two prevailing theories can be distinguished; one proposes the water association being mammaldependent and thus merely the result of contamination from semi-aquatic mammals living in close vicinity to the water source. The other, quite contrary, suggests mammal-independence and hence that water, possibly in association with protozoa, serves as an environmental reservoir for the bacterium.

The need of raw material does of course fluctuate but the long term view is an increasing demand due to the growing consumption of sawn timber products, pulp, paper and lately also biomass. This has led to a keener competition for wood. At the same time there is an ongoing structural change of a significant part in the Swedish wood supply market, the private forest owners. In 1992, 22 % of Sweden´s 335 000 private forest owner lived apart from their forest. In 2007 this figure had risen to 36 %.

Every year, KTH participates in the Shell Eco Marathon, a competition whose goal is to design a vehicle that can go as far as possible using only the equivalent energy of one liter of petrol fuel. This year, one of KTH?s contributions to this race is the Agilis prototype; a car powered by a uniquely configured HCCI-engine developed at the university. The engine is dependent of several subsystems in order to work properly, among other, systems for cooling and lubrication.Combustion engines are in need of a cooling system that reduces the heat developed during the combustion. In general, two main types of cooling systems are employed; either air cooling, where the outside of the cylinder is exposed to a flow of the surrounding air, ore water cooling, where water flows in tubes around the engine, and the heat are transferred by the water to the surrounding air through a heat exchanger.The purpose of the lubrication system is to prevent the friction that builds up in the interference between moving parts in the engine.

In today?s fast growing and closely connected society, a reliable and energy efficient transportation system is more than ever desirable. Nowadays the significant part of the transportation sector?s energy demand is supplied by fossil fuels.Improving energy efficiency in combustion engines will result in reduction of fuel consumption and CO2 emissions. A modern internal combustion engine has an efficiency of 30-45 %, where the most energy loss occurs as result of heat losses in the exhaust and cooling systems.

This essay is a study of the various attitudes and behavioral habits for music consumption and discovery of new music amongst young people in Sweden from a receivers perspective. The aim of the study is to review and map out the current trends, habits and cultural views on music consumption. An online survey was posted and spread on Facebook with 195 respondents as a result. The analyzed result and conclusions of the survey was then to be of use for understanding how to market and spread new music more efficiently. The study showed that there are three dominating sources of music for youth in Sweden.

On commission of the County administrative board in Värmland County a method was developed for analysis of the occurrence of artificial land use at lakes and watercourses. With artificial land use is meant land significantly affected by man. Two bases have been used to carry out the analysis. In one of the analysis the vegetation database and in the other GSD¹-Marktäckedata (land cover data) was used (this method has been used by County administrative board in Jönköping County).The analysis comprises all watercourses within Alsterälven river basin. The digital water bodies are created by the Swedish Meteorological and Hydrological Institute on the basis of GSD-Översiktskartan (general map).

The Swedish pulp and paper industry meets higher demand for energy efficiencyi mprovements with increasing energy prices and changes in the Swedish renewable energy certificate system. One action of energy efficiency improvement is by using secondary heat, that otherwise would have been treated as waste heat, for use in a system with lower temperature demands. The aim of this Master´s thesis is to identify possible secondary heat sources in a typical Swedish pulp and paper mill and to investigate what economic benefits the secondary heat will provide when being used for pre heating of wood chips to a kraft digester.The Master´s thesis focuses on three secondary heat sources; dry warm air, warm water and moisture saturated warm air located inside the pulp or paper mill. Two types of kraft digesters are simulated within this study, a typical Scandinavian digester and a modern twin vessel steam phase digester.Due to quality aspects and low temperature level drying is the drying technology with dry warm air rejected. Using warm water in direct contact with wood chips increases the quantity of water to the evaporation plant and thus reduced pulp or paper production and is therefore also rejected.

Svensk Växtkraft is the owner of the biogas plant in Västerås. The company is planning to increase their treatment capacity at their biogas plant. In connection to this work it is also possible to make some energy saving changes to the biogas plant. The objective of this study was therefore to make an electricity and heat survey of the biogas plant, a detailed study of the heat consumption in the sanitation step and also a comparison of energy consumption with the present sanitation method and an alternative strategy where the waste is treated in 55 °C during 10 hours (the current method is heating to 70 °C during 1 hour). The energy survey was conducted in close collaboration with staff at the biogas plant. The current during normal operation was measured, power was calculated and multiplied by the time of usage to obtain the energy consumed.

A future expansion of wind power in the Nordic power system makes the balancing for the transmission system operator Svenska Kraftnät (SvK) more complicated. Up to the hour of delivery the balance responsible parties? (BRP) makes prognoses and plans, for consumption and production, to help maintain the balance in the electrical grid. How well this is accomplished is affected by the setup of the market design. Therefore SvK has proposed the following possible changes in market design: Increase the imbalance costsIntensify the regulation of imbalancesIncrease the temporal resolution on the different marketsPresent the prices for balancing power in real-timeModify the balancing market to simplify auction of consumption bidsA mapping over the BRPs? processes within planning and trading on the day-ahead, intra-day, and the balancing market has been performed in this thesis.

This thesis investigates the overall risks of flooding over the Design Basis Flooding Level (DBFL) at the Swedish nuclear power plants (Oskarshamn, Ringhals and Forsmark), using statistical data and methods, but also considers historical events which might affect the overall risk of flooding at the specified sites.Considering the nuclear accident which happened in Fukushima in conjuction with the earthquake and tsunami which struck eastern Japan on 11 March 2011, operators and licensors of nuclear power plants all over the world conducted reviews and investigations on the overall risks posed to the plants from external events. One important such event is extreme water level.One part of the thesis includes an extreme value analysis (using Generalized Extreme Value distribution and Generalized Pareto distribution) of water level data from SMHI (Sweden's Meteorological and Hydrological Institute) measured at stations close to the Swedish nuclear power plants. The results of the statistical studies indicate that considering the return period used in the thesis (100 000 years), the water levels at the Swedish nuclear power plants are not expected to exceed DBFL.The other part of the thesis consists of a historical study of extreme weather-related events. The results of this study indicate that no historical events seem to have occured which would indicate a higher risk of flooding than the one suggested by the statistical study. .

In this bachelor essay an attempt is done, to recreate a probable Bronze Age landscape on Gotland, with GIS as a tool. The landscape on Gotland is situated with many different monuments dated Bronze Age, such as cairns and stone ships. In creating of the maps, two possible shorelines contemporary with the Bronze Age have been calculated and marked on the maps. Furthermore, peat lands have been drawn upon the maps, by using the information from geological maps.A landscape variable have been compared between Bronze Age places and Early Iron Age houses; the soil type. On Bronze Age places gravel is the most common, while moraine marl is the most common on places with Early Iron Age houses.From a selection that were made, all Bronze Age places where within 3 km from the water, either the recreated shoreline or peat land.