Sök:

Sökresultat:

7368 Uppsatser om Water and Sewage pipe design - Sida 8 av 492

Anva?ndning av markfuktighetskartor fo?r sta?ndortsanpassad plantering

Digital depth-to-water maps can be produced from a digital elevation model (DEM). Then GIS- based algorithms are used to calculate water flows and the depth-to-water index classes dry, fresh, moist and wet. The purpose of this study was to investigate the possibility to use depth- to-water maps for site adapted planting.The results showed that use of depth-to-water maps for site adapted planting, roughly halved the proportion of improperly planted surfaces from an average of 9 % to 4 %. The variation in the values of proper surface decreased and the result became more even.. In addition, more pine than spruce was incorrectly planted.

Identifiering av deponerat material i en deponi samt metodikförslag för upprättande av vattenbalans.

Högbytorp is Ragn-Sells? largest waste facility and it is located north of Stockholm. There is an old landfill still in use, but at the end of this year it will be closed. The waste deposited on the landfill can, through decomposition, give rise to a large amount of methane gas, which is an energy rich gas that can be used for heat and electricity production. To receive a relatively large amount of gas, the decomposition requires a high moisture content in the waste.

Marmorering i nötkött : påverkan av ras och foderintensitet

The water tower in Uppsala city forest was built in the late 1950's in what is now a nature reserve. The unique place was supposed to be visited by people, which is currently not the situation. This bachelor thesis aimed to perform an analysis and make a design proposal for the environment surrounding the water tower. The analysis was performed using the methodology previously described by architect Arne Branzell. The methodology focuses on how a space is perceived by a person moving through it.

Kvantifiering av föroreningstillskott från dagvatten inom skyddsområdet för Göta Älv : en simuleringsstudie med modellen SEWSYS

The river Göta Älv reaches between Vänern and Gothenburg and is the main raw water source for Gothenburg that supplies about 700 000 people with water. To protect and maintain a high water quality, continuously samples and water analyses are made throughout the river. In 1998 a protection area was founded between surte and Lärjeholm where the raw water intake is. This was made to increase the awareness of the importance to protect the water. However, there is a lot of contribution of untreated stormwater to Göta Älv within the protection area.Göteborg Water and Sewage Works commissioned this thesis where two areas, Tagene industrial area and Kärra residential area, with untreated stormwater outlets within the protection area are studied.

En jämförelse mellan amplifierad singelmolekylanalys och selektiv agar vid kontroll av hygienisering av avloppsslam

Bringing back the nutrients from the city to the country is becoming increasingly important, as the world?s stores of nutrients get more exhausted. Sewage sludge is an unapplied resource, rich in plant nutrients, which could replace parts of the commercial fertilizers used in Sweden today. Sewage sludge may contain large amounts of pathogens, such as Campylobacter and Salmonella, why use can cause severe spreading of infections, both to animals and humans. These pathogens have the ability to survive for a long time in soil and water and therefore some sort of treatment of the sludge is recommended before use.

Bottensubstrat och dess inverkan på reducering av BOD5, COD och TKN i lakvatten genom konstruerade rotzonsanläggningar : En pilotstudie vid Univates, Lajeado ? RS Brasilien

Treatment wetlands been showed efficient for reducing pollutant in waste water. In Lajeado ? RS, Brazil the landfill has poor leachate water treatment. It is necessary to supplement the treatment plant because they need to reduce BOD, COD and nitrate of the water going to recipient. A subsurface flow wetland (SSF) can be a good choice.  In order to be able to design an efficient SSF it is important to understand how the grain sizes of a substrate affect the reducing of pollutants in waste water.

Dagvattendammars reningseffekt : påverkande faktorer och metodik för statistisk modellering

Storm water is defined as runoff from precipitation such as rain or snow. It is collected in sewage disposal systems and since it mainly originates from urban areas it can contain high levels of heavy metals, nutrients and oil etc. Polluted storm water is currently treated by different methods such as wet ponds, constructed wetlands and filter strips. This study investigates these methods, which in earlier studies have shown to give varying results regarding their treatment efficiency.This thesis has been written on commission of SWECO VIAK and was aimed at studying those parameters that may affect the treatment efficiency of nutrients and heavy metals in storm water treatment facilities (STF:s). Through literature studies the dominating treatment processes in ponds and wetlands were examined.

Förstudie till våtmark i Rimbo : Design för optimal hydrologi och kväverening

The euthropthication of the Baltic Sea is a threat that is beginning to be taken seriously by the governments concerned. In Sweden, regulations concerning the allowed nitrogen (N) concentration in the effluent water from wastewater treatment plants are being tightened up. The Rimbo wastewater treatment plant has been imposed to reduce the annual mean concentration of total N in the effluent water to levels below 15 mg l-1. A more and more common way to reduce the nitrogen level in wastewater is to let the water pass through a wetland. This study investigates the possibility to build this kind of wetland at the outlet of the Rimbo wastewater treatment plant.A prestudy of the topography, soil characteristics and groundwater flow indicates that the land area in question is well suited for the construction of a wetland.

Stadsnära hav : en intervju/enkät om upplevelsen

The environment that surrounds us affects us all. Research has shown that we feel physically and emotionally best in natural environments with greenery or water elements. Urban environments are likely to be more stressing then natural environments. How we experience specific elements, as water, of an environment is not as much investigated. There is a need of further knowledge for us to fully understand the interplay between our senses and the environment. Human beings have always been depending on water and the search for it has characterized our deeds and doings through out evolution.

Förslag till placering av anläggningar för att förbättra vattenkvalitén i Tidan

Considering water quality, landuse and reducion of wetland area in the watershed of Tidan, areas witch are in need of constructions to improve the water quality are identified. Constructions are suggested to be located within the smaller streams in the watershed, so that the water is treated before it reaches the stream Tidan..

Krafter på rörsystem vid transient flöde : En jämförelse mellan RELAP5 och Fluent

At Forsmarks Kraftgrupp AB (FKA) forces on pipe systems due to transient flow are frequently calculated as a step to verify their structural integrity. In nuclear industries these forces are often calculated with a one dimensional thermal-hydraulic analysis-code called RELAP5. When calculations regarding more complex geometries are needed, the three dimensional code Fluent is often used. This code is highly time consuming and requires large computational power.This projects aim is to compare calculations of pressure, flow and forces carried out by RELAP5 and Fluent for an arbitrary pipe section during transient flow conditions. This has been accomplished by constructing a simple geometry for which a transient flow is simulated in both programs.

Vattenlogistik vid stubbehandling i slutavverkning

Water logistics has long been a problem in order to effectively carry out stump treatment in both thinning and final felling. It is important that the stump treatment? equipment is configured as well as a sufficient amount of water is carried out on the harvester to get a cost? effective treatment. The flow control of the equipment has improved and water can be dispensed more efficient, but still the amount of water on the machine is a crucial factor in the total cost estimate. The knowledge of the tools available to bring water as well as the internal logistics of loading and transport to the felling site is deficient. Increased focus on "smart" solutions to manage water cost is of great importance in order to combat Hetrobasidion spp in both thinning and final felling. The purpose of the study is to describe and summarize different solutions of water logistics at stump treatment in final felling.

Avvikelser i energiprestanda

Calculated and measured energy in residential buildings is going to differ. The reason to this may be due to many factors. In this study there is a study on how these factors affect the energy use in a building. To get an insight in what defines energy, there is first a description of energy supply both worldwide and used in Sweden, followed by a description of the energy balance. In this study energy will be studied in residential buildings only.

Förslag till placering av anläggningar för att förbättra vattenkvalitén i Tidan

Considering water quality, landuse and reducion of wetland area in the watershed of Tidan, areas witch are in need of constructions to improve the water quality are identified. Constructions are suggested to be located within the smaller streams in the watershed, so that the water is treated before it reaches the stream Tidan..

Vibrationsdämpning av värmepump

Thermia Värme AB is one of the market leading manufactures of heat pumps. In order tomaintain this position, the company wants to improve the vibration characteristics of theirproducts. The aim of this thesis is to develop product design changes that lead to a reductionof vibrations in the heat pump Thermia Diplomat 8.The main cause for vibrations in the system is flow pulsation and mechanical forces inducedby the scroll compressor. Vibration is transmitted through the compressor piping and receivedby the heat exchangers, from where it is further transmitted to the connection points for theradiator and heat source circuits.A number of design changes in order to improve the vibration characteristics have beenevaluated through calculations and practical experiments. The changes have included thecompressor and heat exchanger mountings, the compressor suction and discharge line pipingand also pulsation dampening.The results of the experiments show that the vibration levels in the connections for the heatingand brine circuits can be decreased strikingly through changes in suction and discharge linepiping.

<- Föregående sida 8 Nästa sida ->