On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

This Master of Science thesis is conducted at the faculty Integrated Product Development at theRoyal Institute of Technology and in cooperation with EssNet Interactive AB, both situated inStockholm. In the report the final results and the road to get there is described as well as thedesign process and how the process is used to obtain the goal of this thesis.The author of this thesis has developed the design and the function of an interactive videoterminal (IVT) and by using semantics created an encouraging gaming design. The projectspurpose was to change the anonymous withheld shape and produce an experience of gamingmachine that has been absent. The work was aimed to answer the question: How does oneproceed to develop the IVT and by using semantics creating an understanding of gamingmachine?In general the author wants to show that small changes, with the help of design and its signals,can completely change the overall picture of a product.

The purpose of this thesis was to increase the understanding and discuss safety aspects in two stairwells on Nyforsgatan in Eskilstuna, where the buildings were built during the years 1965-1975. I have presented a proposal for improvement through lighting. I have through different methods, such as surveys, interviews, literature studies and observations, come to a conclusion: that there are opportunities for improvement through better lighting that allows orientation in space and creates a nice atmosphere which will remove the feeling of not being safe, e.g. dark corners and shadows. It has been an exciting process to gather enough of facts to rely on and to develop the lighting design for the environments.

Föreliggande studie omfattar sättningsberäkningar med den senaste kommersiella versionen av datorprogrammet FEM-Design 12, utvecklat i samverkan mellan konstruktörer och geotekniker. Programmet är en uppföljare till den tidigare versionen FEM-Design 11 och även en förbättring av den betaversion 12, som fanns tillgänglig och under utveckling fram tills att den första kommersiella versionen av FEM-Design 12 lanserades under hösten 2013. Tidigare studier har gjorts av en Betaversion 12 i form av ett examensarbete, där jorden modellerades med volymelement, enligt kontinuumsmekanik. Resultaten i studien påvisade en stor procentuell sättningsdifferens (22 %) jämfört med sättningsberäkningar i det geotekniska programmet PLAXIS. Denna procentuella skillnad kan antingen bero på att själva byggnaden inte kan modelleras i PLAXIS och därmed inte kunde beaktas i beräkningarna, eller att det fanns brister i betaversionen FEM-Design 12, vilka gjorde att resultaten som uppvisades inte var rättvisande. I denna naturliga fortsättning har nya beräkningar gjorts med hjälp av den senaste kommersiella versionen av FEM-Design 12 för att validera sättningarna i en ny pilotstudie och undersöka om rimliga resultat erhålls. Som en del av denna jämförelse och värdering har även sättningsberäkningar för hand utförts. Interaktionen mellan FEM-Design och användarna har granskats för att se hur brukarna upplever den nya versionen samt om programmet uppfyller de mål som formulerades i samband med utvecklingsarbetet. Tre olika projekt har modellerats i FEM-Design 12 där jorden beskrivs med finita element (volymelement)..

My final essay is a design proposal for a schoolyard that pertains to the senses. The proposal consists of an illustration plan and this paper. The design proposal takes start in sense stimulation to create a varied environment. The title leads to the concept ?surprisingly predictable?.

This project was conducted during the spring semester 2013 at mechanical engineering program at University Halmstad. The project was conducted in collaboration with MPQ Consulting in Halmstad. MPQ Consulting is a newly established company looking to take step into the product development world. The company has already had ideas and existing products. One of the ideas is to construct and design a form of beach games whose rules are based on the volleyball rules.

The purpose of this thesis is to describe what Building Information Modeling, BIM, could mean for landscape architects, and also hopefully to make sense of the possibilities and problems of the system. BIM is about virtual design and is based on all consultancy groups in the design team modeling in 3D. Intelligent objects and metadata, such as price and material, are used. The project group has a common interchange format for simple sharing of information. To get an idea of how the situation with BIM for landscape architects looks like today, I collected information mostly through interviews.

Examensarbetet har gått ut på att genom kvalitativa undersökningar ta reda på hur grafisk form ochinformationsstruktur samverkar för att skapa användarcentrerade webbplatser. Målet var att ta fram en grund för huranvändarcentrerade webbplatser bör byggas. Denna grund är tänkt att fungera som riktlinjer för formgivare som villskapa användarcentrerad webbdesign.Studien visar att det viktigaste för att skapa användarcentrerad webbdesign är att involvera användarna kontinuerligti utvecklingsprocessen. Detta sker genom användartester och intervjuer med representanter för målgruppen. Vi harkommit fram till att graden av användbarhet spelar stor roll för hur målgruppen uppfattar webbplatsen som sådan,men också vilken uppfattning de får om företaget bakom..

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.