The content of the following report is the summarized result of three students thesis at Blekinge Institute of Technology in co-operation with Water Jet Sweden AB. This report will give the reader a description of principles how to measure the abrasive mass flow in a waterjet cutting system. The work began with a visit to Water Jet Sweden AB to get a closer look at the problem. When the analysis of the problem was done the criteria were defined in the form of demands and desires. The main task of the criteria was to guide the search for the solution.

Moisture damage in kitchens is an area that many people believe to be irrelevant andnot a subject to concern, however the problems encountered might be larger thananticipated.The purpose of this essay is to get a view of how problematic moisture damagecurrently is as well as what can be done to prevent damage during the constructionand building of new housing.Statistics regarding moisture damage as well as several tools for damage preventionhave been studied and investigated. Industrial regulations have been reviewed tounderstand the requirements construction companies must legally follow during theconstruction and building of new kitchens. Home manufacturers and largerentrepreneurs have been contacted in order to get their point of view regarding theproblems with moisture damages in kitchens.The knowledge of moisture safe constructions is prevalent by home manufacturers,insurance companies and entrepreneurs. Despite this knowledge, the constructioncompanies predominately follow the industries regulations, which normally onlyimplement the minimum requirements.In order to get construction companies to design and build kitchens with increasedmoisture security, stricter industrial regulations might be needed to be implemented.Unlike bathrooms and laundry rooms, kitchens are not defined as a ?wet room? andthe regulations for the construction of kitchens are more lenient.It is difficult to detect water leaks in an early state and the moisture damage is usuallyextensive before it is discovered and repaired if the kitchen lacks moisture securedconstruction and water security.

The aim with this thesis is to make a comparison between forcing tulips in a hydroponic system and the forcing off tulips that have been planted in soil. The results are mostly based on interviews with six Dutch and one Swedish tulip forcer and the managing director at the Horticultural Research Centre, Proeftuin Zwaagdijke, in the Netherlands. There are benefits and disadvantages with both methods. Tulip bulbs planted in soil seem to get a brighter colour after forcing, compared with those forced ?in water?.

AbstractElectricity consumption is a globally increasing problem caused by the high share of electricity produced in coal power plants. These contribute to high carbon emissions when only about 1/3 of the heat generate electricity and the remaining 2/3 of the heat cools off. Combined heat and power plants (CHP) have high efficiency because they use the residual heat for domestic heating. The CHP plant often use fuels from renewable resources, giving them a lower carbon footprint, but are also depending on the heat demand. If electric powered products such as drying cabinets convert to heat powered products more environmentally friendly electricity will be produced by CHP plants, which can supplant electricity, produced from coal power plants and reduce carbon emissions.

This thesis within the field of Integrated Product development at the Royal Insitute ofTechnology, performed at Primary Development Dishcare at AB Electrolux, is supposed to finda solution to enhance the hygiene inside an Electrolux dishwasher. The outcomes of this thesisare functional prototypes to evaluate the efficiency of disinfection by the use of Ultra VioletLight and Ozone.The thesis has followed Electrolux Primary Development process, with delivarables andcheckpoints.Ultra violett light with a wavelength of around 264 nm penetrates through the cell wall ofbacteria and micro organisms and causes a molecular rearrangement of the cells DNA. Thisprevent the bacteria from reproducing and it is considered dead. Commonly used UV-C lampstransmits the wavelength 254 nm which is very close to the optimum for germicidal action.A competitive brand have reacently launched a dishwasher claiming to achieve greaterdisinfection with an UV feature. This dishwasher was tested during the thesis and proven tohave a very low effect on the hygienic result.Two prototypes were devolped and tested for UV disinfection of dishware.

Studies show that activity based costing (ABC) is not widespread in practice even though it has been present in the academic world since the 80's. This thesis examines the reasons for the discrepancy between theory and practice through a case study of a Swedish manufacturing company. The intension is to answer the question of what contributes to the choice of precision in product costing.We found arguments for increasing precision in product costing but not to the extent of a full-scale ABC implementation. The company's estimation of the value of increased precision. In the study three company unique factors were isolated that affected the company's estimation of value; drifting purpose of product costing, historical use of product costing and knowledge about product costing..

The purpose of this study was to investigate what attracts children to activity and movement on the playground in a central and municipal preschool in a town located in middle of Sweden. The method was to use a qualitative group interview with five children, two girls and three boys, at the age of five. The interview consisted of a general question about what kids think is fun to do on the playground and was complemented with follow-up questions depending on what the children said. A qualitative interview with a preschool teacher and observations were carried out in the hope that they would confirm what children claimed about play and movement. This study showed a gender difference when girls like to swing together while the boys are making the swinging for a contest.

On the 26th of January 2010, the Supreme Administrative Court in Sweden gave five rulings which greatly affect the possibility to keep a close company within a family by transferring the ownership of the company to the next generation. The five rulings concern the interpretation of the prerequisite, same or similar activity, which can be found in section 57, clause 4 of the Swedish Income Tax Act.    The prerequisite is fulfilled when an entire or parts of a business is transferred to another close company and the receiving company?s business activity is within the framework of the transferring company?s business activity or when the companies have a similar connection. Depending on which shares that are being evaluated, the prerequisite can refer to both the shares in the receiving or the transferring company. When the prerequisite is fulfilled, a standardized amount of the business income will be taxed as capital gains and the surplus will be taxed as earned income.

Filtermaterial av 75 % torv och 25 % kolaska har använts under 2 respektive 4 år för rening av avloppsvatten från två biltvättar. Jämförelse med Kristianstads kommuns riktvärden för avloppsvatten från fordonstvättar visar att filtren fungerat. För avfallsklassning krävs kunskap om innehåll av miljöfarliga ämnen i produkter som använts i tvätthallarna. I brist på kunskap om innehåll av ej analyserade miljöfarliga ämnen i filtren anses förbränning vara ett bra omhändertagande ur miljösynpunkt, då energi och aska återvinns..

The aim of this thesis was to answer a number of questions about the environmental consequences of aircraft de-icing. A further aim was to suggest how the environmental consequences due to the release of de-icing fluids can be measured and reduced.The main impact of the aircraft de-icing on the environment is due to the large oxygen demand for the degradation of glycol based de-icing fluids which are released in the environment. The effect of the increase in oxygen demand depends on where the degradation occurs in the ecosystem. In a sensitive ecosystem, the large demand of oxygen could provide an anaerobic environment which would be harmful for many types of organisms.In order to reduce the negative effects of the applied de-icing fluid, there is some type of collection system at every regular airport in Sweden. The methods of collection can be divided into two general groups, hydrological isolation or vacuum sweeper trucks.

The popularity of vegetated, or green roofs, has grown over the past years due to their potential function of maintaining urban environment quality. The aim of this study was to investigate if substrates with different organic material, peat and charcoal, with two contents (3 or 6 weight%) influenced the growth of the cuttings during the first critical period of the establishment. Biochar is used as amendment to agricultural soils and has, theoretically, many of the properties suitable as organic content in green roof-substrates. Peat is one of the materials that is commercially used in green roof industry. The substrate has been treated with different amounts of water.

The mining industry, in terms of ore excavation and metal production, is and has been important to the Swedish economy. In connection with the ore excavation process, large amounts of partly sulphidic waste are produced. When the metal sulphides are exposed to air and water they are eventually oxidised, which leads to the formation of acidic water with high concentrations of metal cations and sulphate ions, so called Acid Mine Drainage (AMD). This water may reach the nearest surroundings and cause negative environmental effects. By covering the waste with soil or water, the oxidation process can be minimised. At the Rävlidmyran mine in the county of Västerbotten open pit mining took place between 1951 and 1991.

The euthropthication of the Baltic Sea is a threat that is beginning to be taken seriously by the governments concerned. In Sweden, regulations concerning the allowed nitrogen (N) concentration in the effluent water from wastewater treatment plants are being tightened up. The Rimbo wastewater treatment plant has been imposed to reduce the annual mean concentration of total N in the effluent water to levels below 15 mg l-1. A more and more common way to reduce the nitrogen level in wastewater is to let the water pass through a wetland. This study investigates the possibility to build this kind of wetland at the outlet of the Rimbo wastewater treatment plant.A prestudy of the topography, soil characteristics and groundwater flow indicates that the land area in question is well suited for the construction of a wetland.

Antifouling paint containing the biocide bisTributyltinoxide (TBTO) has been used since1960 to reduce the occurrence of fouling on hulls on boats/ships. January 1st, 2003 theantifouling paints containing TBTO were prohibited. This ban covered all use of paintcontaining the substance TBTO. The ban was introduced because of alarming observationssuch as development of imposex in aquatic non-target organisms. Imposex is the impositionof male sexual characteristics on mainly female marine snails and occurs due to exposure toTributyltin (TBT).

Through the rulings RÅ 2010 ref. 11, HFD 2011 ref. 75 and HFD 2011 not 88 the Swedish Supreme Administrative Court have extended the concept of same or similar activities which can be found in section 57, clause 4 of the Swedish Income Tax Act. Through the ruling the Court has partly clarified the application area of the regulation but question marks still remains.In the statutory text there is no definition of what shall be regarded as same or similar activity and the preparatory work does not give any further direction on how the concept should be interpreted. Ever since the amendment in 1995 the general view has been that activities can be transferred between different companies without affecting the waiting period in the company of origin.