Lean has been studied intensely since the 1980s and it has been tested and successfully implemented in a wide variety of businesses. This thesis aims to examine the potential effects of a Lean implementation on meeting efficiency, a topic that has gotten little attention in the research community. First, a number of meeting problems are introduced, as they are perceived from the company that is the subject of the study. Second, the potential of introducing Lean in a meeting process is evaluated using the Lean Thinking principles. Third, the wastes that are generated from the meeting problems are identified.

Background: Several accounting scandals have caused a development from rules-based to principles-based regulation. Swedish municipalities follow the principle-based recommendations issued by RKR (The Council for Municipal Accounting). An explicit requirement of component depreciation has been introduced prior to 2014. The principles-based regulatory framework raises some choices regarding the introduction and demands that professional judgments are made. There is some risk that comparability decreases.

Background: Sweden is one of many countries which have a long history of immigration during the past decades. Each yearSweden receives numerous immigrants from different parts of the world, which has madeSweden to a multi-culture country.Aim: The aim was to describe nurses? experiences of encounters with patients from different cultures.Method: A literature-based study based on qualitative research, nine scientific articles were performed.Result: The analysis of the data resulted in four themes such as; insufficient communication, family members as a link to the patient, unfamiliar situation, and attentive to the patients? vulnerability with seven subthemes.Conclusion: For a well functioning encounter between nurse and patient from different cultures, a prerequisite is that the nurses establish a relationship based on good communication with the patient and relatives. This can prevent inequality, suffering based on lack of nursing, violation and misunderstandings..

Emhart Glass is the world?s leading manufacturer of equipment, controls and components to the glass container industry. The goal of this project has been to identify improvements and propose cost saving solutions when moving one of Emhart Glass work cells in Sundsvall. The changes shall result in improved work environment and increased product quality. The method contains value stream mapping, concept selection and P-FMEA and complies with Emhart Glass goal to become a more Lean focused business.

The aim of this thesis is to examine the customer profitability in a wholesale company. A case study of Eugen Wiberger AB has been conducted. Firstly the authors have examined the current perception of the company regarding their customer profitability and the results of their calculation of the customer profitability. Secondly an Activity-Based Costing analysis has been performed and has been compared to the perception in the case company. The conclusions are that the smaller customers are the least profitable, and in some cases unprofitable, whereas the larger customers are profitable.

AbstractThis essay aims to problematize and illuminate the connection between special-education and nature-based activities. With a theoretical ground that is based upon a sociocultural perspective I consider the information from the field. Through a qualitative and critical perspective I performed individual interviews with five pupils from the sixth school-year in the Swedish elementary-school. I also performed Focus-group interviews with two educators and three teachers in the same school-form. By a Hermeneutical working-method I have found out that the informants in my survey have a common experience that activities performed in nature has a positive effect on learning.

The purpose of this paper is to examine whether the sentences handed down to young offenders can be considered fair. We wanted to take an in-depth look at the penalties to understand how they work. To clarify our purpose, we used the following questions: How does organizing sanctions work in practice? What support services are offered to the young? What can be done to ensure sentences are as favorable as possible for young people? The empirical material is based on qualitative semi-structured interviews with six social workers from two different municipalities. We also made use of previous research in the field as a reference tool.

Pappersmakulatur uppstår i tryckpressarna, men orsakerna finns i företagets alla funktioner. För ett framgångsrikt förbättringsarbete med att minska makulaturen krävs därför att all personal är engagerad.Examensarbetet utfördes på Bobergs Tryckeri AB i Falun, ett familjeägt företag med 60 anställda, som producerar personifierad direktreklam och blanketter. Syftet var att undersöka hur pappersmakulaturen kan minska och målet var att hitta orsaker samt ge förslag på åtgärder för att minska den.Genom intervjuer med personalen kartlades produktionssprocessen och utifrån det utarbetades förbättringsförslag. Exempel på förbättringsförslag är att kontinuerligt mäta och rapportera makulaturen, förbättra kommunikationen mellan avdelningarna och utveckla färgstyrningen. Litteraturstudier och kontakter med nyckelpersoner inom branschorganisationer och andra liknande företag, var till stor hjälp i arbetet.

The building industry consumes approximately 40 % of the total energy consumption in Sweden, where the using stage is dominating with 80 %. There is a lot of work in progress to reduce energy use in the building industry, and the demands from authorities regarding energy use increases. As a part of this work Building and planning department of Sweden has established a requirement that has been applied since 2006, and restricts a maximum energy use for buildings.The requirement includes that an energy simulation must be done in advance to demonstrate that it is possible to meet the demands.Reality is however more complex than an energy simulation program, that frequently underestimates the energy use of buildings. The purpose of this thesisis to study and analyse deviations between estimated and actual energy use in modern apartment buildings. The study includes four apartment buildings in Stockholm, Gothenburg and Jönköping that were built in 2007-2009.

Problem: The corrugated board industry is highly affected by customer uncertainty, various demands and short delivery times. In combination with a complex multi-step production process managers have to be able to identify bottle-necks and gain knowledge and understanding of how different changes in process will affect the production output. <br/><br/>Purpose: The purpose of this master thesis is twofold, (1) to examine applicability of complexity theory through agent-based modelling on a production process (2) to identify improvement areas in order to increase the production output at SKS production site in Eslöv, by modelling and simulating the production process through an agent-based model. <br/><br/>Method: The chosen method of this study is a combination of a case study and a complex system approach. The empirical data was collected through interviews, observation and document studies which were analysed through an agent-based simulation model.

A district heating plant has the advantage that it can take advantage of the waste heat from industries and use of cheap fuels to produce heat. But for the long term is competitive requires that energy is also saved in district heating plants. One way to save energy in a district heating system is to increasing cooling to the return temperature. This leads to less power needed to drive the distribution pumps,  and that more energy could be extracted from the same amount of fuel by an improved flue gas condensation.In Karlskoga the return temperature into the district heating plant is high. They would therefore reduce the return temperature in order to extract more energy from the flue gases.

The purpose of this study is to describe and analyze homelessness in a medium-sized municipality from an organizational perspective. Some of the central questions in this study are: How is the cause of homelessness explained? How do different actors in the community address, prevent and combat homelessness? Who is responsible for the homelessness?This study is based on four semi-structured interviews with organizations that work with homelessness. The analysis is based on problem definition theory.The result of this study shows that homelessness is a problem in this medium-sized municipality even if it is not a big one and that it is often closely combined with substance abuse. The responsibility for the homeless is on the homeless themselves and the social service because that causes is, according to this study, individual based.  .

This rapport is based on a survey that was sent to 196 randomly selected forest owners, who during 2013 ordered a forest management plan from Norra Skogsägarna. The purpose was to examine how forest owners experienced advice given by an inspector based on their forest management plan..

This report is about the experiments with mixing of the separated water and the vacuum pump seal water at Hellisheiði power plant. This is done to prevent silica scaling and clogging in pipes and reinjection wells as well as eliminating vacuum pump seal water from the plant. The experiments were done in four stages: the first stage comprised of tests with different flows of separated water at 70°C, the second stage was carried out by mixing the separated water at 70°C and the seal water with different amounts of the seal water, the third and the fourth stages were like the first and second but with the separated water at 120°C. The results show that this method is good if the mixture is around 50/50 separated water and seal water, to control the silica scaling in the separated water and to be able to reinject the seal water with the separated water. This does not eliminate the silica scaling in all of the separated water because the amount of separated water is much more than the amount of seal water that comes from the plant. .

Due to a constantly increasing competitive pressure it is of great importance to constantly strive for improvements in order to gain competitive advantages. Lean Production is a concept that has been introduced with the aim to minimize waste and increase profitability. The purpose of this report is therefore to investigate how to perform effective planning according to the principles of Lean Production, in companys with customer exclusive products, through a case study at Sandvik Mining and Construction (SMC), and to investigate how SMC kan improve their planning of drifting rods at the production unit in Sandviken.The study started by creating a theoretical framework, to describe the subject planning and planning based on Lean Production. This frame work constituted the base for the case study which took place at Sandvik Mining and Construction, and also for the model and planning tool that has been introduced.The result of the study is partly a general model with factors that contribute to a more effective planning. These factors has beed identifed as SMED, which focuses on reducing set up times and in the end to facilitate the planning.