More often consumers demand instant dry soup that can be prepared with a water temperature below 100o C, which is currently not possible, because the dry soup becomes too thin when using water with a lower temperature. In this study, various kinds of starch studies were made to optimize the starch used in the existing product to make it more viscous at both high and low temperatures. The result was that one of the two starches present in the existing product was retained by change in quantity as it contributed to important flavor parameters. The second was removed and replaced with a starch that made the product more viscous at lower temperatures. To find out if the new product differed from the existing product a viscosity measurement and a sensory paired preference test were made.

The main purpose with the project has been to approximate the magnitude of the pollution transport from the actual road surfaces and to get an approximation of the possibility to collect the pollutants to reduce the load to the water and improve the water quality.The quantity of pollution transport from the most trafficated roads areas in Örebro city has been calculated. Roads whith a traffic exceeding 10 000 vehicle/day. The study has been done with the calculation tool StormTac. Through analysis of traffic loads and road surface, which together with a different kinds of parameters gives an approximation of the pollutant transport.The calculation has included some metals and other substances in the stormwater and has also included the present of suspended solids. Included the overall study, some smaller areas has also been calculated for the possibility to remove pollutants.The work also includes calculation for three different areas for stormwater treatment.

Mitt examensarbete fra?n Designprogrammet ? ha?llbar utveckling, a?r en under- so?kning av flera dimensioner. Det o?vergripande arbetet a?r ett platsspecifikt insamlande av framtida visioner hos inva?nare, kommun och kreato?r. Visualiseringen involverar samtliga av de ovan na?mnda parterna i skapandet av en ny mo?tes- plats i ett medialt kategoriserat miljonprogramsomra?de.

This study explores the effects of two different post-treatment methods on stain reduction in glazed creamware from the late 20th century. The objects stains have been characterized by type one and type two stains which is the result of prolonged contact with food residues, were subjected to the same initial stain reduction. The two post-treatment methods examined are soaking the objects in deionized water and surface rinsing with deionized water. The comparative analysis included photographs under normal and UV-light exposure to assess stain visibility, weight measurements before and after treatments to monitor the absorption and evaporation of liquids, and observations throughout the experiment. The results revealed that while type two stains showed significant alterations after treatments, specifically after soaking, type one stains remained unaffected by both methods.

This report describes how the system may be exposed to oscillations and how this can lead to resonance. Resonance is a phenomenon that occurs when a system is affected by external periodic oscillations with frequencies close to the system's natural frequencies. Structures subjected to resonance can risk great damage and destruction, why resonance is something that is important to take into account when designing structures. Alternative ways to counteract resonance is to supply damping in the system. Damping means that the resonance decreases instead of letting the amplitude increase.The report discusses some examples on constructions that have experienced the effect of resonance.

To create multifunctional buffer strips along a watercourse in an economically sustainable way requires consideration of many different factors. In this plan we have selected pollutant reduction as the main purpose of the buffer strip. We have also strived to achieve minimal income loss due to reduced production, increased biological diversity, good game preservation that leads to higher income from hunting, aesthetical satisfaction and possibility to profit from available subsidies. This is done mainly to make landowners/farmers more interested in creating buffer strips along water courses. As sand is the dominant type of soil in the area, the water course is less affected by surface runoff compared to if the soil would be clay or some other finer texture. Game preservation and subsidies have therefore been the main factors when establishing the width of the strip, because these require wider buffer strips in some cases.

When stormwater occurs near human activity the water gets polluted. The purity and composition vary widely depending on the types of activities in the area, the type of surface the water comes in contact with, precipitation and many more parameters. It has long been known that stormwater quality can affect both human health and the environment as stormwater is a major contributor to pollution of receiving waters.A human activity that has an impact on the environment in several different ways is traffic and stormwater is no exception. Airborne gases that react with precipitation, oil leaks and fuel systems that drops down on the ground, metals from brake linings and rubber particles from tire wear are some of the aspects you have to take into account when categorizing the relationship between traffic and polluted stormwater.In this project, stormwater samples from a parking lot in Halmstad, Sweden were collected and analyzed with an atomic spectrophotometer. The presence and relationship between copper, cadmium and zinc with different rainfall parameters have been studied.

Three methods of sensitivity and unceartainty analysis have been applied to the operative stormwater- and recipient model StormTac. The study area is the watershed of lake Flaten in the municipality Salem. StormTac?s submodels for stormwater, pollutant transport and the recipient are cosidired. In the sensitivity assessment, the model parametres and inputs were varied one at a time by a constant percentage according to the ?one at a time? (OAAT) method and the response of the outputs were calculated.

Wood has always been an important material for people, and it is used for many applications. As for example, fuel for cooking and heating houses, construction materials and for constructing means of transport. Since wood also is a material that with time biologically degrades due to activity by micro organisms and wood fungi it is important to find ways to protect and further lengthen the life span of the material when in service. One method is to decrease the amount of water in the material by impregnation with an hydrophobic oil. The Linotech method which uses only pure linseed oil is one such possible method. The aim of this study was to investigate the possibility to at the same time impregnate and stain/colour wood samples of pine and spruce by using the Linotech method.

Mitt examensarbete fra?n Designprogrammet ? ha?llbar utveckling, a?r en under- so?kning av flera dimensioner. Det o?vergripande arbetet a?r ett platsspecifikt insamlande av framtida visioner hos inva?nare, kommun och kreato?r. Visualiseringen involverar samtliga av de ovan na?mnda parterna i skapandet av en ny mo?tes- plats i ett medialt kategoriserat miljonprogramsomra?de.

Arbetet behandlade vilka konsekvenser inom driften (ekonomiska kostnader och teknologi) som rederier kommer att drabbas av när IMO:s barlastkonvention träder i kraft då barlastvattnet måste renas innan inträde i Östersjön. Arbetets syfte var att få fram vilka konsekvenser det blir för rederier när IMO:s barlastkonvention träder i kraft. Resultatet skulle jämföra skillnaden mellan lag och rekommendation då Helsingforskonventionens rekommendationer baseras på IMO:s barlastkonventions krav. En kvalitativ metod valdes för att komma fram till resultatet, i form av en öppen intervjustudie, där fyra olika företag har intervjuats. Syftet med intervjuerna var att se ifall de följde Helsingforskonventionens rekommendationer och vilka konsekvenser det skulle innebära och skulle komma att krävas då Barlastkonventionen träder i kraft.

Using leaching test is a way to get a picture of pollutants retention and leaching in a risk assessment on contaminated land. There are several different types of standardised leaching tests today, where the natural leaching processes are speeded up to make it possible to predict the leaching of pollutants. These leaching tests have been developed for waste and there are no specific guidelines on how to judge the results from the tests, when making a risk assessment on contaminated land. This work is an investigation on how to use leaching test in this type of risk assessments. The strengths and weaknesses of the different types of tests are discussed. Depending on what type of information you want from your leaching test, different types of tests are suitable.

For several years Uppsala University together with several companies has been involved in a WISENET project aimed at improving railway transport security. By placing a sensor system near the wheels of each wagon, the temperature of the bearings can be measured and transmitted to a collector placed centrally on the wagon. This in turn transmits the collected data to RFID receivers placed intermittently along the railway.As the signals are transmitted wirelessly, problems may occur as the antennas get dirty or coated with ice and snow. To determine the effects of these coatings, several tests were performed examining the reflection coefficient S11, the impedance Z11 and the efficiency eta of an antenna, and how they varied when various coatings were placed over the antenna. Examined coatings were ice, snow and water to determine the effects of weather, and various metal-based coatings: powdered iron both pure and partially oxidized, and iron ore granules.

Arvika Fastighets AB is a municipal subsidiary tasked with managing all green areas in the municipality, with a strong focus on the City Park and plant beds in the city centre. These areas generate large amounts of green waste, which is currently transported to the municipality's composting area at Lycke. Currently, the material is piled up and turned once a year without using the resulting soil for flowerbeds, lawns, and shrub/tree plantings. The purpose of the study is to determine if Arvika can compost the green waste in a more efficient manner and produce weed-free soil ready to be mixed into various substrates for different purposes. Interviews with the Swedish Church and several municipalities in Sweden have been conducted to learn from their experiences and knowledge of how they make their composting work.

This report describes how the system may be exposed to oscillations and how this can lead to resonance. Resonance is a phenomenon that occurs when a system is affected by external periodic oscillations with frequencies close to the system's natural frequencies. Structures subjected to resonance can risk great damage and destruction, why resonance is something that is important to take into account when designing structures. Alternative ways to counteract resonance is to supply damping in the system. Damping means that the resonance decreases instead of letting the amplitude increase.The report discusses some examples on constructions that have experienced the effect of resonance.