There are many different recommendations on how to keep pelargoniums over winter, but most of the recommendations suggest ?the higher the temperature, the more light and water the pelargonium needs?. The purpose with this paper is to try to explain the best and the worst results that are achieved with different storage alternatives of zonal pelargoniums. The results are based on an orientating investigation carried out in January-February, and a questionnaire that members of the Swedish Pelargonium Society answered to. Both the orientating investigation and the questionnaire showed that zonal pelargoniums are best stored light and cold but frost free. They should be irrigated according to their needs which is when the soil is dry, about every second to third week. Zonal pelargoniums are very resistant to drought and can survive without water for at least 44 days, both when kept under light and cold as well as under light and warm.

Today?s climate changes will probably give rise to precipitation in Sweden, which will cause more floods in Swedish rivers. Many of the Swedish rivers are regulated and have lots of hydro-electro power plants. Higher floods in the rivers will give greater water loads on the dams, which mean that a higher discharge through the sluice gates and in the spillway channels is needed. High discharge of water in a spillway channel can create scour of the material in the channel.

Drinking water is produced from raw water and is either from groundwater or surface water. This thesis aims to find out if the cleaning process of raw water is sufficiently effective. This is important because consumers are otherwise at risk of waterborne infection caused by pathogens. There are three groups of pathogens; bacteria, virus and parasite. These have different characteristics which mean that they require different water treatment to be separated.

By immersion in the situation of the food production today and a historical study of how past development has led us to this point, one goal of this essay is to discuss whether the current way of farming can be applied in a sustainable future. Another objective of the essay is to study the vision Vertical farming as an alternative approach, and to focus on different aspects of this phenomenon in order to provide as comprehensive a picture as possible.The paper, thus, seeks to broaden the views for alternative approaches regarding a well-established method which we often take for granted. The aim is also to initiate a discussion around the need to also take radical ideas in regard if we want to face the future in a sustainable manner. The method is a qualitative literary study where scientific articles and papers have been used to discuss the issues: why has the idea of Vertical farming arisen, what is Vertical farming and how is the Vertical Farm meant to operate? Does Vertical farming have a place in the sustainable city of the future? For a long time us humans lived as one with nature, in a symbiotic relationship in which we gave and took as a functioning part of an ecosystem.

Drinking water is produced from raw water and is either from groundwater or surface water. This thesis aims to find out if the cleaning process of raw water is sufficiently effective. This is important because consumers are otherwise at risk of waterborne infection caused by pathogens. There are three groups of pathogens; bacteria, virus and parasite. These have different characteristics which mean that they require different water treatment to be separated.

The purpose of this study is to investigate if there is enough consideration taken to sensitive forest areas close to water or wetlands during clear cutting assignments, and to estimate the extent of damage made by forestry machines used at that time. A field and literature study is used to show how to improve and prevent the damage made in the wake of the machines. This study is made for Sydved, and shall culminate in a policy to prevent ground damage during their clear cutting assignments. The areas which were part of the field studies were clearcuttings on fine grained soil close to water and wetlands. The purpose was to find out if the water had been affected, what had been done to prevent ground damages and what more could have been done. The results of the field studies show that more work needs to be done to reach up to expectations. More information about the assignment area, better planning of sensitive regions, and strengthening of the main haul roads with brush are some of the improvements that can be done. There is also a need for more exact guidelines, follow-ups and education for everyone involved to have the same goals and understanding to prevent ground damage..

The guest harbor on Utö, Utö Gästhamn, is currently using electricity for heating all of the water used in the showers and taps. Because of the large amount of visitors, especially during the summer months, the hot water usage gets very high and that is also the case for the electrical bills. During the year of 2011 the cost of electricity for Utö Gästhamn reached a total of 257 500 kr. Out of these 257 500 kr approximately 142 000 kr, 55 % of the total cost, were because of the water heating.The report is the result of a cooperation with Skärgårdsstiftelsen, the Green Islands-project and Utö Gästhamn where the mutual goal is to dimension a solar energy system, to promote the sustainable development.Initially the different techniques for the solar energy system are researched. The techniques are plane solar collectors, evacuated tube collectors, pool collectors and photovoltaic cells.

In the EU the amount of waste increased by 14 percent during the years 2000 to 2010. EU?s target to reduce waste generation runs parallel with the aim of increasing the efficiency and profitability aligned with energy recovery. In Sweden the energy recovery through incineration is increasing steadily, and 46 percent of the municipal solid waste (MSW) is treated by combustion. This report aims to examine the profitability of processing MSW into Refuse Derived Fuel (RDF) from an economic-, energy- and environmental perspective.

The purpose of this thesis is to assist the Swedish energy company NIBE Energy Systems in their studies of adaptive regulation applicable to electrical water heaters. Due to coming energy classifications of these appliances in the European Union, NIBE Energy Systems needs to use adaptive regulation, called Smart Control, to keep their products in the best possible energy class and remain competitive to the market. By using this Smart Control regulation a 2-3 % improve-ment of efficiency can be credited the system. This is a small number, but heavily needed, since the energy classes are based on the idea that the European Union is provided with electricity from coal condensate power resulting in a 40 % maximum efficiency. Furthermore, doing noth-ing will result in some water heaters not being approved to use on the market from 2015 due to low efficiency.

SummaryIn the area to the east of Hue city, in Vietnam, lays Tam Giang lagoon, one of Asia's largest lagoons, with an area of 22,000 hectares. This lagoon is suitable for aquaculture. One reason for this is because the salinity differs from sweet to salty in different parts of the lagoon. The Vietnamese Government advocates an increase in environmentally-friendly aquaculture and the fish Siganus guttatus (Rabbit fish) is a candidate for this. This fish eats mainly algae and can be cultivated in a polyculture.

Drinking water is produced from raw water and is either from groundwater or surface water. This thesis aims to find out if the cleaning process of raw water is sufficiently effective. This is important because consumers are otherwise at risk of waterborne infection caused by pathogens. There are three groups of pathogens; bacteria, virus and parasite. These have different characteristics which mean that they require different water treatment to be separated.

During the last few years the presence of high arsenic (As) concentrations in ground water has been of major concern both internationally and in Sweden. Much evidence has been reported about toxic effects caused by arsenic. The carcinogenic effects and the possibility to measure the toxic impacts at low concentrations made the World Health Organisation (WHO) to reduce the guideline value from 50 to 10 ?g l-1 in 1993. In Sweden the corresponding reduction was implemented in 2003. Several surveys in Sweden have shown that high arsenic concentrations may occur in ground water.

The purpose of the thesis was to map the hydraulic load on the Knivsta river from stormwater runoff, and build a platform for further studies of pollution loads on the rivers ecosystems. New residential areas are planned to be built in Knivsta municipality and it will have an impact on stormwater flows to Knivsta river. To examine the impact this will have, simulations were made in the area as it stands today and after expansion work. The work includes calculation of flows from the populated areas but also from the catchment area around it consisting of woodlands and fields. Because of expected climatic changes which may affect rainfall, the simulations have been performed with different return periods for rainfall data.

AbstractResource efficient manufacturing is a term that has been increasingly applied within manufacturing, where one of the key points is to reduce waste of such forms that do not add value for the end customer. By the Lean principles, there are seven plus one types of waste, in which the definition of the eighth point varies among sources. In this study, the eighth type of waste has been interpreted as the untapped creativity and competence among employees that has not been put to use. From this, our question was incubated; How can you make the most of the employees? untapped creativity and potential within manufacturing? The case study will be developed with empirical data obtained from Dometic Group by conducting interviews.From the gathered literature, it was concluded that the communication between employees contributed to an increased understanding of one another as well as it allowed for improvement in work.

This report is the result of a thesis work in Integrated Product Development, regarding hygienic features in dishwashers and especially disinfection by the use of steam.The thesis is performed at Electrolux Primary Development Dishcare in Stockholm and in collaboration with the Department of Machine Design at the Royal Institute of Technology.The targets of the thesis are to prove the advantages of a technology suitable to implement as a hygienic feature inside a dishwasher and to realize a functional prototype of a differentiated hygienic feature that does not exist on the market today.The process followed to perform the thesis is the process defined for Electrolux Primary Development.The technology chosen for development is disinfection by heating the water on the surface of the dishware, by the use of steam.A number of tests on how steam behaves when injected into the dishwasher tub have been performed, providing the results that have been taken in consideration when designing the prototype.The prototype consists of a pipe system provided with nozzles to eject the steam into the upper parts of the dishwasher. Tests of the final prototype show that thermal disinfection of water in a dedicated area of the tub can be reached within 9 minutes. The operation requires 0,17 liters of water and consumes 0.2kWh..