AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

SCA is the largest private owned forest owner in Sweden, with an ownership of 2 million hectares of productive forestland. To manage the planning of such large areas and to fit the traditional organization structure of a Swedish forest company, the planning approach is subdivided into three stages; strategic, tactical and operational. The strategic part, based on a statistic sample of stands, returns a harvest level estimate which should then be implemented at actual sites in the tactical part. This procedure can lead to incompatible solutions as the strategic solution is not necessarily possible to translate into actual sites in the tactical plan. The geographic aspect is important in tactical planning due to the large costs for moving equipment and maintenance of a large number of forest roads.

In this thesis the methane gas potential of three different substrates, two algaes Saccharina latissima and Laminaria digitata and biosludge mixed with paper fiber was studied. This was done by batch experiments in a laboratory environment to examine the gas production and composition of the produced gas.Biogas production is a complex anaerobic digestion process in which various microorganisms decompose the substrate in steps and at the end produce biogas and a residue. Many factors affect the production of gas, for example the substrate content, temperature and pH in the digester.The analysis of methane potential were divided into two experiments. In experiment 1 substrates were digested along with inoculum from Växjö waste water treatment plant in a temperature of about 37 ?C.

In this report female farmers use of technical equipment is investigated. There is little research made on this subject in Sweden, therefore this report can be seen as an explorative study. Research makes it clear that machinery, throughout history and even today, has been seen as a male area. Heavy machines are often associated with the same attributes as masculinity. Force, power, efficiency and control are some examples.

Mek Stans 07 is a machine developed for Tetra Pak in Lund as a 10p candidate theses project at Halmstad University. The commission behind the project involved development of a machine that punches holes in packages for the inspection division at Tetra Pak. The task for the machine was to facilitate the process of making openings for testing in the company?s other equipment. Researches on different methods of cutting, types of automatization and possible designs were made. To implement the project a design and construction from the base where chosen.

Syftet med förelagda undersökning var att karlägga de krav som ställs vid återvinning av han-delsfartyg i de nya regelverk som antagits av IMO och EU med målet att åstadkomma en miljövänlig fartygsåtervinningsindustri. Fokus har legat på de krav som de aktuella regel-verken ställer på fartygsägare och fartygsåtervinningsanläggningar, främst beträffande hantering och bortskaffning av de miljöfarliga material som finns ombord på fartyg. Med dessa krav som utgångspunkt har det redogjorts för hur ett återvinningsförfarande organiseras för att uppfylla de miljökrav som regelverken ställer.Resultatet av undersökningen pekar på att det med dagens teknik och kunskap i allra högsta grad är möjligt att åstadkomma miljövänlig återvinning av handelsfartyg. De problem och utmaningar som resultatet pekar på ligger på ett annat plan än det rent praktiska, bland annat lyfts den långsamma process som implementering av regelverk är fram som en utmaning för fartygsåtervinningsindustrin.Slutdiskussionen handlar till största delen om implementering av lagstiftningen, men också om hanteringen av fartyget och de material som finns ombord, samt om definitionsfrågor rörande ägendeskap. Vidare diskuteras rollen för andra aktörer inom sjöfartsnäringen och de åtgärder som dessa skulle kunna vidta för att åstadkomma en miljövänlig fartygsåtervinning innan de aktuella regelverken träder i kraft och blir bindande.

In 1997, the Swedish parliament adopted a decision on Vision Zero (nollvision) in the road and transport system. Vision Zero means that no one should be killed or seriously injured in traffic accidents in the road transport system (Prop. 2003/04: 160). For the Transport Administration in Sweden (Trafikverket), this means increased demands on security and signage at road work sites around the country. This in turn means increased demands on the contractors that carry out road work for the Transport Administration.

In Dar es Salaam, as in many cities in developing countries, green areas are decreasing due to the fact that the growth of buildings, infrastructure and services has become a priority. As the population increases more buildings and infrastructure are needed and much of the building activity takes the form of uncontrolled settlements, which encroaches the public green space. Dar es Salaam has approximately three million inhabitants, of which about 70 percent are living in informal settlements. The aim with this study is to make a design proposal for a park and recreation area where the Msimbazi river basin in the centre of Dar es Salaam is today. The basin consist of a few playing fields, footpaths and some urban farming, but apart from this it mostly consists of unused grasslands, swamps and forests. Because it is an unsafe place and badly connected to the rest of the city infrastructure, it has become a barrier. The annual flood combined with the constant still shallow water creates a good breading ground for malaria mosquitoes.

The Swedish pulp and paper industry meets higher demand for energy efficiencyi mprovements with increasing energy prices and changes in the Swedish renewable energy certificate system. One action of energy efficiency improvement is by using secondary heat, that otherwise would have been treated as waste heat, for use in a system with lower temperature demands. The aim of this Master´s thesis is to identify possible secondary heat sources in a typical Swedish pulp and paper mill and to investigate what economic benefits the secondary heat will provide when being used for pre heating of wood chips to a kraft digester.The Master´s thesis focuses on three secondary heat sources; dry warm air, warm water and moisture saturated warm air located inside the pulp or paper mill. Two types of kraft digesters are simulated within this study, a typical Scandinavian digester and a modern twin vessel steam phase digester.Due to quality aspects and low temperature level drying is the drying technology with dry warm air rejected. Using warm water in direct contact with wood chips increases the quantity of water to the evaporation plant and thus reduced pulp or paper production and is therefore also rejected.

Olaer är ett bolag som utvecklar, tillverkar och marknadsför oljekylarsystem. Bolaget startades 1957 i Frankrike med engelska finansiärer. Sedan starten 1957 har företaget blivit en global koncern. Idag är företaget representerat i fem kontinenter. Deras kylarsystem är applicerade i fyra olika branscher, industri, anläggning- och jordbruksmaskiner, energi och, olja och gas.

The number of people in the world and the urbanization increases. This leads to a bigger need of space for the built environment, space that soon doesn?t exist. A large portion of humanity?s energy disposal is used for heating of buildings.

Fall accidents are a big problem in the construction industry today and stand forapproximately 23% of all accidents. Skanska is a construction company that has avision toachieve zero accidents. Eliminating fall accidents is one step on the way towards theirvision. The state of Skanskas fall safety has been analyzed in this thesis to show whichimprovements are possible in fall safety.A literature study has been performed in which Arbetsmiljöverkets (The Swedishwork environment authority?s) laws and rules, together with Skanskas own rules havebeen studied.

The construction industry has not undergone the same logistical development as the manufacturing industry; this, in combination with increased material price, leads to the fact that the construction industry must be improved. This master thesis is a part of the research cooperation Brains & Bricks goal of reducing production costs for the construction sector by 25 percent. Brains & Bricks is a cooperation between Linköping University, Peab and Katrineholms municipality. The master thesis aims to identify improvements in the flow of material, the Supply chain operation reference, SCOR, model has been used and the work has been carried out on one of Peab?s construction sites. At present the business is characterized by bad communication both between the construction site and the office as well as between the construction site and suppliers.

Syfte: Syftet med examensarbetet är att undersöka möjligheter till effektivisering av fjärrvärmeinstallationer i småhus med hjälp Lean. Detta har gjorts genom att besvara de tre följande frågeställningarna:Hur ser en fjärrvärmeinstallation i småhus ut i dagsläget?Vilka slöserier går att identifiera i processen för fjärrvärmeinstallation i småhus?Hur kan slöserier i processen för fjärrvärmeinstallation i småhus minskas?Metod: För att uppfylla examensarbetets syfte har en fallstudie genomförts på Jönköping Energi som är en leverantör av fjärrvärme. Där har intervjuer och dokumentationsstudier använts som datainsamlingsmetoder. Litteraturstudier har gjorts för att samla in information kring teorier som sedan använts för att utvärdera och analysera empirin.Resultat: Genom studien har slöserier identifierats i processen för fjärrvärmeinstallation i småhus.

This master thesis concerns the occupational safetyenvironment at Outokompu Stainless, Avesta Work.The study is of a sociotechnical approach wherehumans are involved and interconnected in the samesystem with technology and organisation. In order toreach the corporation?s goal of zero accidents with losttime injury, the work of improving and maintainoccupational safety and health has to regard behaviourand cultural aspects. The aim of this study is todescribe the safety culture at a specific production unitand research what work which has to be done in orderto change and improve the safety culture at AvestaWork.There are several opportunities for improvementpointed out in this paper and here are some mainresults presented. First and foremost, the concern ofsafety among blue-collar is often secondary due toproduction.