The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

Objective: To investigate the experiences of ambulance nurses when using Boussignac CPAPcompared to their previous model, and their suggestions for possible improvements in the use of CPAP in the care of patients with pulmonary oedema. Method: A qualitative study with a descriptive and exploratory approach. Data was collected through ten semi-structured interviews with ambulance nurses, seven men and three women. The analysis was conducted using Lundman and Graneheim?s content analysis.

The aim of this review is to assess the ethical implications of aquaculture, regarding fish welfare and environmental aspects. The aquaculture industry has grown substantially the last decades, both as a result of the over-fishing of wild fish populations, and because of the increasing consumer demand for fish meat. As the industry is growing, a significant amount of research on the subject is being conducted, monitoring the effects of aquaculture on the environment and on animal welfare. The areas of concern when it comes to animal welfare have here been divided into four different stages: breeding period; growth period; capturing and handling; and slaughter. Besides these stages, this report includes a chapter on the current evidence of fish sentience, since this issue is still being debated among biologists.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

For most pupils homework is a natural part of school and their education and there are several providers of homework assistance: the pupil's parents, sibblings, friends, Internet forums, hired private tutoring, non-profit organisations and at times even the pupil's school. This study has investigated the use of the school-based homework assistance programme at the Upper Secondary School of Psychology in Stockholm and why the programme is not more frequently used by its pupils. The school offers homework assistance two hours each Thursday afternoon, with at least two teachers being present to tender for the school's 127 pupils. The cost of the programme has been estimated to approximately 12 500 Swedish kronor per week. Through the main use of a questionnaire given to both the school's students and teachers, as well as an interview with the school's headmaster, this study will show that despite receiving the opportunity few pupils take part of the programme on a regular basis.

Ravelsmarks gård have now reached the stage when there are few options for the future. The options are either a construction of completely new farm buildings or a winding up of the milk production. Present on the farm today there is 65 dairy cows plus recruitment. 44 cows stand in long-stalls and 20 cows stand in short-stalls. The objective of this study was to examine the profitability of a completely new cowshed. In order to get costs for investments different milking systems and equipment for feedstuff have been compared. The systems in the investment budget have been chosen on recommendations from advisers, salesmen and on the basis on what is suitable for the farm. One system where a so-called mix feeder wagon is used for the roughage seemed to be best suited for Ravelsmark. The different prices obtained for the manure well show that there are possibilities to decrease the investment costs.

This bachelor degree project was carried out at Saab AB Service and Repair, Arboga, Sweden. The objective was to design, construct and implement a new stable and reliable method of measuring the continuous vertical displacement (height) of the military search radar PS861 mounted on a hydraulic powered elevator. The end product needs to be durable enough to be fully operational in the harsh environment of an outdoor elevator shaft and yet as accurate and precise as possible since one of its purposes is to calibrate control equipment. Previously used technique has proven not to meet any of the above mentioned properties.A prototype using a high resolution quadrature output rotary encoder has been developed, allowing a completely digital interface. This new method has been evaluated in laboratory environment where tests have been conducted regarding both reliability and validity.

One step towards a more sustainable energy system is to create a more flexible electrical grid, where increased demand response among electricity consumers can play an important role. A distribution grid owner can encourage their customers to use electricity more evenly distributed during the day by introducing different types of grid fees such as time-differentiated power tariffs. In this master thesis, the theoretical economic impact of a flattened load profile for a distribution grid owner is investigated. Different factors that impact the distribution grid owner?s economy are identified and two are chosen to be quantified; losses in the grid and the fee to the feeding grid.

Health care costs in relation to GDP are escalating all over Europe and the Swedish health care industry is not an exception. Between 30 and 50 percent of resources used in health care are considered waste, in the sense that they don't contribute to increased health. This illustrates the big need for hospitals to become more efficient which is why many hospitals today are trying to move towards a process-oriented organization. This paper therefore aims to identify the elements necessary for this type of organizational change, the barriers encountered when moving from a functional to process oriented hospital as well as how to overcome them. The case study was conducted at Karolinska Universitetssjukhuset and shows the importance of not just transmitting a sense of urgency but also communicating that the upcoming change is long term.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

Today there are various methods to use when euthanizing horses. Earlier the use of free or captive bullet was the most common method, but in recent decades this has changed and chemical euthanasia is now considered the most common method. The chemical euthanasia has in Sweden been dominated by the use of barbiturates. Somulose® entered the market in the beginning of the 90?s as an alternative to previous chemical euthanasia.