The construction industry is always looking for ways to make the work more efficient aswell as minimize the waste of money in general. At the same time the industry is showing alow awareness of logistics which has to increase in order to improve the industry in thesekind of questions. Projects located in the inner city have high demands on the logistic andthe handling of material due to the so often limited space for storages of the material. Dueto this the purpose of this report is true a case, study and analyze what kind of factors thereis to take into consideration during the materials way from the supplier to the workstationin a project located in the inner city. The data for the report was collected with the help of acase study, and in three different ways.

This report describes what wireless local area networks are and the use and configuration of them. These WLAN as they also are called can be used both in new installations and expansion of existing networks. Further on this report reveals security in this area. Security is incredible important in all networks not at least wireless because you don?t have to be in the environment physically to get the information, you only have to be in the coverage area that can be several hundred meters.

This project aims to investigate whether algae can be used for biodiesel production in Italy. Algaes are a good option since they are fast growing and do not occupy arable land. The aspects that have been considered are growing, harvesting, which algae strain that is most suitable, extraction of oil, the production of biodiesel and where in Italy this could be possible due to climate. Cost? and energy calculations have been made to investigate if biodiesel produced from algae would be profitable. During the production of biodiesel there are several residues obtained. When the oil has been extracted from the algae, biogas is produced from the residual biomass by anaerobic digestion and then the electricity that can be produced is supplied to the production of biodiesel.

It takes a very long time for ionizing radiation of used nuclear fuel toreturn to a natural background level, for this reason one of the requirements for theselection of the location of a repository was that the environment as well people'shealth would be protected from the harmful effect of radioactivity. This requirementmeans that the waste must be isolated in a geological formation. In Sweden therepository will be built in the crystalline bedrock. The location for the Swedish nuclearfuel repository at nearly 500 meters depth at Forsmark in Östhammar was decided 3June 2009. The repository will be located at Söderviken, close to the Forsmarknuclear power plant in a 1.90 billion year old bedrock that will accommodate 12,000tons of spent nuclear fuel.

This report presents the results of a thesis in which the department PL Hus at Grontmij AB isstudied. The study has been done in order to locate problem areas in order to streamline andimprove the quality of working. The study was done by an engineering student from theDepartment of Industrial Management at KTH on behalf of Grontmij AB. The project extendedover a period of 20 weeks during spring 2011.In addition to the Department itself has two project managers in two different projects beenfollowed. The method used has been participant observation and was used to be able to comeclose to reality and thus find problem areas where there are opportunities for development.Validation was made through comments and opinions from workers at Grontmij AB, afterreading the reports analysis.Based on a system and holistic approach has parallels been drawn to the production systems suchas TPS (Toyota Production System) and lean production.

The dishwasher is a wide spread product that occurs in many households. It saves the user time,water and energy. When using a dishwasher instead of doing dishes by hand a lot of energy issaved.The importance of lowering the energy consumption does not only come from the consumerwinnings but also from an environmental point of view. Scientists are certain that the globalwarming comes from the emission of green house gasses that is created by human consumptionof oil, gas and coal.Dishwashers today are a lot more energy efficient than older dishwashers, but there are stillmargins to lower the energy consumption. The aim with this project is to investigate thedishwasher and it?s washing cycle, noting different phases and components that contribute towaste of energy.

The construction industry is always looking for ways to make the work more efficient aswell as minimize the waste of money in general. At the same time the industry is showing alow awareness of logistics which has to increase in order to improve the industry in thesekind of questions. Projects located in the inner city have high demands on the logistic andthe handling of material due to the so often limited space for storages of the material. Dueto this the purpose of this report is true a case, study and analyze what kind of factors thereis to take into consideration during the materials way from the supplier to the workstationin a project located in the inner city. The data for the report was collected with the help of acase study, and in three different ways.

It takes a very long time for ionizing radiation of used nuclear fuel toreturn to a natural background level, for this reason one of the requirements for theselection of the location of a repository was that the environment as well people'shealth would be protected from the harmful effect of radioactivity. This requirementmeans that the waste must be isolated in a geological formation. In Sweden therepository will be built in the crystalline bedrock. The location for the Swedish nuclearfuel repository at nearly 500 meters depth at Forsmark in Östhammar was decided 3June 2009. The repository will be located at Söderviken, close to the Forsmarknuclear power plant in a 1.90 billion year old bedrock that will accommodate 12,000tons of spent nuclear fuel.

The aim of this study was to establish knowledge about the most suitable substrate for cultivating different kinds of anaerobic beer spoilage bacteria in the brewing industry. During the study, two other aspects were investigated; if the sample volume affects the results and which anaerobic beer spoilage bacteria are present in the micro flora at the brewery. The method used was standard cultivation with four different substrates; Universal Beer Agar, Nachweismedium Bierschädliche Bakterien, Raka Ray and VLB S7-S. During the identification of bacteria in the micro flora, a method using PCR was used. None of the substrates showed a significant advantage over the others.

The aim of this report has been to investigate the use of electricity energy before and after a conversion of foodservice. The ambition was also to highlight the food safety and the retention of nutrients in relation to the conversion. The methods being used were qualitative interviews, case studies, study visits and literature. The equipment and the use of energy was the same in 2008 as in 2011 for hot-holding of the tested component, sauce with ham. The chilled system used more than three times the energy and cost for one portion than one portion in the hot-hold system.

Formulation and testing of a new type of chainsaw lubricantThe company Agro Oil has come up with the idea of developing an environmentally adapted chainsaw lubricant with a new unusual base fluid. A field test with a tree-harvester shows unsatisfactory low temperature properties and high wear. In this work the viscosity, price and pour point of different combinations of the given base fluid and three other base fluids have been investigated. Desired viscosity and price are determined for different formulations. The new lubricants tested show lower pour points than almost all products on the Swedish market.A test equipment has been developed to investigate the wear.

The purpose of this work is to study a circulation project in Enköping municipality, where the society?s rest products are used to make beneficial products. In Enköping the rest products from waste treatment plants and private sewers are used to fertilize and irrigate Salix plantations that later are harvested and burned at the local combined heating and power plant, ENA Energy AB, to produce electricity and heat. Possibilities to apply this kind of project ona municipality in Russia are also explored.Guryevsk municipality in Kaliningrad region was chosen since there is a need to improve energy systems and reduce emissions to water and air. This municipality strives to become environmentally friendly.

In Sweden, a big part of the energy use is used in the housing sector. Political goals and targets are set up which the housing sector needs to work towards. Apartment buildings are a major part of the housing sector in Sweden and therefore reduction of energy use in these kinds of buildings are key to lower the energy use in Sweden. But there are not only political incentives to reduce the energy use. Some energy?saving measures are directly profitable and should thus be performed.

When the costs for a company increase it is normal to look for alternatives to lower thesecosts. One of the expenditure that farmers have is energy costs. The price for the energy mayvary because of the free market. To look at the possibilities for a farmer to invest in sunpower, to make the company less sensitive for the changes on the electrical market, isinteresting. The biggest part of the electricity that is produced in Sweden comes from a fewcompanies on the market.

This master thesis covers the seasonal planning of a small scale hydropower system. The system in this study is owned and operated by Mälarenergi Vattenkraft AB. The total system consists of 4 different main rivers with 24 hydropower stations and several dams. The total installed power in the system is 43.75 MW. Most of the hydropower stations are regarded as small scale hydropower stations and thus entitled to green certificates.In this report the issue of planning is formulated as an optimization problem.