The key elements of sourdough fermentation are the presence of active lactic acid bacteria (LAB) and yeast. Sourdough fermentation originates from the ancient Egypt. One theory concerning its onset states that a portion of bread dough was set aside to be baked at a later date and started to ferment spontaneously.Sourdough may contain a wide variety of microorganisms, mainly dominated by LAB and yeast. There are over 50 species of LAB that has been identified in various sourdoughs and more than 20 species of yeast. Sourdough fermentation has been shown to have various impacts on baked cereal good, most of which are attributed to LAB.This study addresses some effects of LAB from fermented milk products in sourdough and sourdough bread.

Swedish agriculture stands in front of big changes the whole time. As a milking producer you have to adapt and develop the company to these changes and find the best solution. This potential is easy to find if you compare your company with other similar companies. Labour cost is the biggest cost in milking production after the cost for food. Today it is rather easy to measure how many hours per cow different system of cow houses needs, but we do not know so much about how many hours it takes to breed a calf. To learn more about the labour time with the calves during the first time after the calf was born, I made time studies on five different farms with calf hutches, automatic milk system, large calf boxes, and smaller calf boxes with teat buckets.

This report, written by Ma?ns Ridze?n and Jonas Stenberg, presents the thesis carried out the spring of 2012. The authors met the first time in 2008, when they started their studies at Uppsala University. Since then they have completed various projects, both within and without the university. This study is based on a theory that was first conceived when Jonas Stenberg did his internship in the summer of 2010.

The purpose of this essay is to draw attention to the obstacles that affects the internal trade of waste within the EU. The essay doesn?t in any way encourage pollution or illegal handling of waste but unfortunately there are large profits to be made from illegal destruction and recycling of waste and especially hazardous wastes. Therefore the dependable companies handling waste must access a market with fast and flexible (but predictable) regulations as well as lower transaction costs to help make the environment better and encourage a strive for increased recycling. There are examples where some waste only can be sent to a land-fill within the country but could be recycled in other EU-countries.

The evaluation of the function of the feeding of sheep herds is suggested to involve the work effort, the fulfilment of the nutrient needs of the sheep and the feed waste. Mechanisation of the feeding can be very simple or include high degrees of mechanisation. Three different farms, representing different levels of mechanisation are presented. Descriptions and analysis of the feeding systems including mechanisation, work effort and estimations of the feed waste are made on each farm. The herd with the most advanced feed mechanisation included a rolling feed band and mix wagon. The other farms were partly or little mechanised including ad lib feeding from big bales and manual distribution of hay and concentrates. The most mechanised farm was able to feed a large herd of sheep at a low work effort and little feed waste. However, the investment in machinery has to be weighed against the improved efficiency.

In some herds it has been observed that extremely short teats have become a problem; with a negative influence on the milking performance. The aim of this study was therefore to investigate to what degree the quality of the teats and the milk in cows with short teats is affected as compared with cows with normal teat length and furthermore if the milking performance could be improved by using a liner adapted to short teats. This study was divided in two parts. In the first part, it was examined if there were any differences between short teats and teats with normal length with reference to the milking performance, udder emptying, teat treatment, milk quality, and udder health. 11 pairs of cows were used and in each pair of cows one cow had teats shorter than 40 mm while the other cow had teats longer than 50 mm.

The European Union provide 27 % of total volume raw milk produced in the world. This number is steadily decreasing due to that the world milk production increase is more rapid than EU production growth. The growing middle-class change the demand for food, a higher standard of living increase the demand of milk products as well as other various animal products. Since 1984 the EU milk quota has limited the supply from EU, but the quota will expire April 1st 2015. The European Milk Board expect that the removal of quotas will make the farm gate price decline.

Automatic milking systems (AMS) provide the opportunity for less manual labour and an increased milking frequency. But in order to reach an optimal milking frequency a well-functioning cow traffic is crucial. There are many factors affecting cow traffic but one factor that has not been studied thoroughly yet is the effect of different light intensities during the night, 22.00 h to 05.00 h. Therefore the aim of this study was to determine the effect of different light intensities during the night on number of selection gate passages (GP), milking frequency and milk yield. The study was conducted as a Latin square were three light intensities were applied: LOW (11 ± 3 lux), INT (33 ± 1 lux) and HIGH (74 ± 6 lux), in three different herds.

The production costs have steadily increased within the construction industry during the 21st century. Voices are raised meaning that the construction industry is too unsuccessful in making the production more efficient and to develop it?s way of working. One way to deal with the production costs is to minimise the waste, with waste meaning activities that doesn?t add value to the finished product.

According to recent statistics the construction industry is responsible for the largest waste discharges of both dangerous and non-dangerous waste, when disregarding the "non-dangerous" amount of granite waste produced by the mining industry and the waste produced by the pulp and paper industry. Preventive work within waste management is an ongoing practice so to be able to reduce negative environmental effects. One of the most common actions for the companies to take is to separate the different kinds of waste from one another at the construction site. Although by working with the problem in earlier stages of the process a large amount of the waste could already have been reduced.Companies in the construction business that are actively working to decrease environmental impact in their operations often use an EMS (Environmental Management System). By using environmental management as method the company can manage their environmental work so that actions can be taken where they are needed the most.

The world?s growing need for energy together with a desire to ward off the worst consequences of global climate change has resulted in a never seen desire to invest resources in renewable energy sources. Biogas production through anaerobic digestion is one of those growing energy sources. In Sweden there are over two hundred plants that uses this biological process to break down organic substances while producing carbon dioxide and the energy-rich gas methane.This master?s thesis has focused on development of the mixture of different organic substances that is treated at a specific plant, namely Mosserud biogas plant.

Outside of many Swedish households today, you will find a typical green wastecontainer. This container has not changed since its introduction, despitecomplaints about foul-smelling and its impractical system. Even if the system usedtoday, still is the most optimal choice, there is a lot of newly developedalternatives out there.Its purpose is to get a broader perspective on how a waste management systemcan be developed into a working, land efficiently and aesthetically pleasing systemof humans and the environment in a small residential area.The authors treat the residential area of Jära, Ekhagen, in Jönköping, which ismanaged by JM AB as a problem area in regards to waste management.The issues raised by the authors are the different waste management systems usedin the corresponding areas of the world, how to apply technical andenvironmental as well as the waste management facilities from financial aspects.In the process, the methods used were literature reviews, case studies and aninterview. The case study was done through a modeling of waste managementsystems in the area Jära and an interview was conducted with the company Envacworking with vacuum systems. Studies have been made by different systems n theareas around the world.The results show that using directives and guidance will reduce the environmentalimpact done without replacing the traditional system.

Intercropping involving trees is called agroforestry and makes it possible to get higher production for every area unit. The trees can function as food, fodder, fuel, medicine; prevent mark erosion and much more. Agroforestry can also be combined with animal husbandry. The aim of this study was to document the animal production systems used by rural small-scale farmers maintaining ruminants and using agroforestry in the northern province of Rwanda. The farmers using agroforestry is expected to have higher milk yield than average due to homegrown protein. The method used during the study was semi-structural interviews with booth open and closed questions. In order to get in contact with farmers that matched the criteria; small-scaled rural farmers with ruminants and using agroforestry, the ?Vi Agroforestry Programme? (Vi-Life) in Kigali were contacted and the staff worked as supervisors, translators and contact with the farmers throughout the study. During the study nine individual farmers, two cooperatives breeding sheep and one group interview were conducted.

Botanically diverse pastures are commonly used in New Zealand to reduce the ruminant environmental impact by reducing the methane production from the rumen digestion. In order to evaluate the effects diverse pasture species have on the milk fatty acid profile seventy-two lactating Friesian-Jersey crossbred dairy cows were used in a randomised block design with two replicates of six treatments. Six different pasture mixtures were fed at a daily allowance of approximately 15 kg DM/cow/day. The mixtures were categorised as either a simple or a diverse pasture. The simple mixtures all contained white clover with the addition of either a standard diploid perennial ryegrass (RG), a diploid high sugar ryegrass (HS) or tall fescue (TF).

The decrease in the number of dairy farms in Sweden has been ongoing for a longer period of time. But the fact is that this has previously not had any big effects on total amount of milk produced in Sweden. The main reason is that the remaining dairy farms get larger. However, during the past year, there has been a decrease in the total amount of produced milk, because the decrease is faster than the increase within the farms that are left. During the same period of time the supply of milk on the global market also has decreased. In spite of the fact that the global supply have decreased and the fact that the milk price increases, there are dairy farmers in Sweden who chose to exit the market.