The collection of hazardous waste from the household around Swedish municipalities varies. 1% of the households waste is hazardous waste. It has hazardous features that can give bad consequences for the nature and human health if we don?t collect it and treat it. Therefore the law controls it, the municipalities have responsibility for the household waste.

Construction waste from the housing industry includes all unnecessary consumption of building materials. The definition of construction waste is construction materials that has not been built in and becomes waste. Constructions waste can be divided into two types of contributions: operational and work site contribution. Some of the common construction materials in housing industry have such low usage level as 75 % and the rest becomes construction waste. Low usage of construction materials creates unnecessary costs and has a major environmental impact.

In most countries, the dairy industry focuses on the volume of milk produced instead of its composition. This results in a high content of water and a lower proportion of fat and protein. A high proportion of water is not desirable when processing the milk into various dairy products like cheese, cream and milk powder. High water content also increases the costs for transport and storage, and also an unnecessary, albeit marginal, strains on the world?s water reservoir.

There are various arguments for using total mixed rations (TMR) or not. Cows can easily become fat and thus poorly utilize the feed while it can be stated that TMR also has a positive effect on cows? health and wellbeing as the rumen environment is more constant than when separate feeding is applied. Studies do show that that especially low yielding cows kept in groups get fatter when fed TMR. The overfeeding implicates higher feeding costs. This study included 10 herds where 5 had TMR and 5 hade separate feeding of forage and concentrates.

All products will eventually end up as waste, which in a sustainable society has to be handled in an efficient and environment friendly way. This report focuses on waste fractions meant for combustion, often difficult to characterize. However, more homogeneous fractions that are treated biologically are also discussed.The study concerns the region of Borås, Sweden, where the waste plant Sobacken has provided a good starting point. On this site, fuel to the Energy-from-Waste plant of Borås Energi is prepared and the biological waste is treated through anaerobic digestion.One important part of the study has been to collect experience-based knowledge from the technical staff at Sobacken and Borås Energi. This information was compiled into an overview of wanted and unwanted fractions to the preparation plant and the boilers respectively.

Approximately 20% of the milk within the udder of a cow is stored in the cistern and immediately available for milk removal, while activation of the milk ejection reflex is required for removing the remaining milk stored in the alveolar compartment. The aim of this literature review is to describe, evaluate and consider implications of the three different suckling activities that the calf displays during a suckling bout. In terms of milking, these phases are represented by pre-stimulation, stimulation during milking and post-stimulation. Pre-stimulation is commonly performed in order to induce the milk ejection reflex, whereby the hormone oxytocin is released and the alveoli in the secretory tissue are contracted. Time requirements regarding pre-stimulation must be considered in relation to lactation stage and milking interval.

As a result of an increased consumption, waste volumes has grown steadily throughout the 1900s, and this puts great demands on an efficient and ecological sustainable waste management on both local and national level. In order to evaluate collection and disposal of household waste, a large number of Sweden´s municipalities are using waste analyses. The overall aim of this study has been to summarize and assess results from waste analyses executed in Härjedalen´s municipality during the years 2007-2011.The evaluation has given information about the household waste´s composition, quantity and change in time. The report´s objective has been to create a basis which the municipality can use in planning of future information efforts and other measures, and give some proposals on how these can be designed and targeted. Therefore, the report also highlights research on motivations factors that affects environmentally conscious behavior such as recycling, and how different instruments like information can be used to promote this.

This thesis concerns waste management on construction sites and was conducted on behalf of ICA Fastigheter.Areas of concern:How can an environmentally-efficient waste management system on construction sites be defined? What potential exists for exploiting the waste resources that are generated?How can the waste management be optimised by reducing the quantity of waste and by optimal sorting?How can the client of a project influence the waste management?The purpose of the work was to investigate sustainable waste management in the building and construction sector and to highlight waste as a resource from an environmental and economic perspective.The aim of the work was to define an environmentally-efficient waste management system, to analyse the potential that exists in waste management and to draw up guidelines for optimal waste management.The method consisted of a literature study, two visits to construction sites and four interviews.An environmentally-efficient waste management system means that the waste is managed in the following order of priority:Prevention     Reuse  Recycling     Energy recoveryLandfill     The prevention of waste is an important area that has not been adequately explored by the building and construction industry. The quantities of waste could decrease with the implementation of measures such as ordering materials in the dimensions required, prefabricated components, logistics centres with Just-In-Time deliveries, less and improved packaging and less wrapping. The reuse of waste materials and temporary apparatus as well as the use of a return pallet system are examples of reuse that reduces the quantities of waste.In most cases the source sorting work is a matter of course and the proportion going to landfill is down at a low level. The source sorting can be optimised by sorting all materials that can be reused and recycled to use them as a resource.

The waste fractions offered to households in Sweden differ depending on where you live. The responsibility for the waste are grounded by the Swedish law where the municipality are responsible for the collection of household waste and FTI are responsible for collecting all packages and papers that the households sorts out. A new waste regulation is under consideration where the responsibility for the household waste may change. The bulky waste from households is collected at recycling centers where the households leave it in different containers for different fractions. These recycling centers are formed different and the fractions offered in them also differ depending on in what municipality they are located.

The purpose of this report was to identify the current waste management of non-hazardous construction and demolition waste in a few Swedish construction companies, based on the different steps in the waste hierarchy with a focus on waste prevention, reuse and recycle. Additionally, the purpose was to attempt identifying opportunities, obstacles and as well as to propose possible solutions from an environmental perspective. The method used was a qualitative study using interviews conducted through emails and phone with employees occupying positions that could answer this reports questions. The results of this report indicates that waste management of construction and demolition waste has improved, and less waste goes into landfills. The concern is that the overall amount of waste being produced is not decreasing, thus calling for actions preventing the production of waste.

When facing the fact that high yielding dairy cows has an increasing energy requirements, the practice of adding lipid supplements such as concentrates rich in palm oil and/or palm oil industry by-products become more common. Palm oil containing high levels of C16:0 causes high levels of free fatty acids (FFA) which are linked to larger milk fat globules (MFG) which affect the reaction of lipolysis resulting in rancid flavour and processing problems. Instead of using palm oil, rapeseed oil rich in C18:1 C18:2 can be used. In order to evaluate the effect of added C18:0 and C16:0 on milk lipolysis, 30 Swedish Red lactating dairy cows including 15 multiparous (MP) and 15 primiparous (PP) cows were randomly divided in three groups resulting in 3 10 cow-groups (5 PP and 5 MP cows per group) and fed one out of three concentrate mixtures: control (C), a standard concentrate mixture with no fat added; palmitate (P) as C plus the addition of palmitate methyl ester (10 % in DM basis); and stearate (St) as C plus the addition of stearate methyl ester (10 % in DM basis). Milk yield was registered, and milk samples were collected and analysed for milk composition, FFA content and size of MFG.

Swedish goats are mainly held for cheese production and therefore, both milk quality and composition are of great importance for dairymen. Today, only few data exists on milk composition from Swedish dairy goats and the casein content is still unknown. One way to reduce the work load for goat farmers and increase animal welfare can be to keep goats and kids together for longer periods. The aims of this study were to investigate how milk yield and composition were affected when kids suckled their dams during 8 weeks, and to measure the casein content on farm level by a mid-infrared spectroscopy method, previously calibrated for goat milk. Lactating goats were kept in two different MIX- systems where the dams are both suckled and milked.

Milk yield levels in dairy cows are influenced by many factors such as nutrition, breed, health status, management and environment. This study was conducted among small scale farmers in Zambia, where the climate can be dry for up to six months per year and cause a lack of green pasture for livestock and on-farm produced feed. The purpose of this study was to identify management factors that can influence milk yield at small scale dairy farms in Zambia, and present advice that could improve productivity, without the need of expensive investments. The study included semi-structured questionnaires presented to the farmers (n=29) including questions about cattle management and milk production. Testing of somatic cell count (SCC) with DCC (DeLaval Cell Counter) from herd milk samples (n=56) and observation of housing and animal body condition on-farm was also made.

The taste of the dairy product is probably the main factor determining consumer?s dairy products choice. Consequently it is of great importance that the product tastes good and as expected every time. Off-flavors in milk can be caused by for example oxidation of the milk fat. Since copper is a prooxidant, a high copper content in the milk can cause oxidation.

In a time when milk producing farm businesses face decline in profitability it is of great importance to examine how the situation can be improved. This thesis is a study off efficiency in milk producing farm businesses represented by Swedish, Dutch and German farms. The aim of this study is to investigate whether any differences exist between companies in these countries. Moreover, the study includes a mapping of a number of factors that determine how efficient milk production can be managed. This mapping is based on a literature review on prior efficiency studies followed by qualitative interviews with milk production advisors as well as a questionnaire sent out to dairy farmers in Sweden.