Detta examensarbete omfattar produktutvecklingen av en komponent till en mätutrustning som ska mäta flytbarheten hos smält metall. Arbetet har utförts hos Bryne AB och har lett fram till koncept-, material- och tillverkningsförslag för komponenten. Arbetet har även utvärderat ett för gjuteribranschen nytt formmaterial som alternativ till dagens gjutsand. Tester har gjorts för att se om återvunnet (material x) går att använda som formmaterial till högtemperaturapplikationer..

Rooted in Industrial Ecology (IE) theory, this report evaluates how urban agricultural concepts and techniques, can contribute to improved ecological sustainability within the inner city boundaries of Stockholm. An overarching literary study as well as an interview was carried out, resulting in a qualitative analysis followed by suggestions for practical implementations. A substantial convergence was found between the eco-restructuring objectives of IE and the principal motives for urban agriculture. Consequently, eco-restructuring objectives are found in varying degrees in the presented urban agricultural techniques. Industrial symbioses, permaculture and combinations of urban agricultural techniques are tools which are capable of corresponding adequately to the diversity of urban settings.

This project is an attempt at creating a bag that is both functionaland has an interesting and relevant visual appearance. I have found that a bag that is functional usually have adapted certain aesthetics which are appealing only to a very limited target group. At the same time many bags that are more focused on style can be downright disabling to the carrier. I wanted to create a functional bag, and to explore new functions doing this, while working with aesthetics that stayed relevant and interesting to my target group. The bag was designed for the company Åhléns and their label WERA Stockholm, and theircustomers was the target group.

Cultural objects may become wet by deliberate water cleaning, water disaster or watersoaked for other reasons. Air drying textile objects and even other organic materials from awater wet state, involves many problems depending on the strong capillarity action of water.Damages and changes such as bleeding of dyes, stains or lines of impurities from watermovement, shrinking or stiffness can occur. Freeze-drying as an alternative drying methodhas often been used for wet archaeological and marine objects, but more seldom for historicalmaterials.This bachelor thesis addresses the issue of whether freeze-drying can be an alternative controlleddrying method for historic costumes. Costumes and related objects are often compositeobjects, consisting of multiple materials, as well as being three dimensional, all of whichwill complicate drying. The purpose of this study was to investigate whether it is possible tohandle costume objects after wet cleaning for drying by freeze-drying, and if damages due tosurface tension of water, can be avoided in this way.

Context: During the 21st century several alarming reports have been published that deals with the depletion and pollutant of the earth by human interference. The earth is an ending resource and so are the mountains and bedrocks which are continuously mined in order to harvest its minerals. The idea behind Urban Mining is to (re)invent processes enabling further purpose for materials both from old deposits and new products providing secondary raw materials and energy. This thesis aims to investigate the challenges and opportunities of how firms and organizations can and will be able to strike a better balance between product-/service systems, economic growth and environmental stewardship in the context of Urban Mining as an approach. With the innovation of processes, technology, business- planning and creation in focus.Objective: How to future proof a business model for Urban Mining by the usage of business model design.Method: This thesis will be conducted using a case study approach, meaning that it will incorporate qualitative, exploratory and descriptive characteristics - aiming towards enabling both applied and fundamental research.Results: The result evaluates the business model element differences between traditional C&D industry and Urban Mining industry.

Travelling children is the topic of my work. Children who commute between more than one home. Society is rapidly changing and so is the concept â familyâ . The nuclear family is no longer the most common one. Children are now travelling more frequently than ever.

Fossil fuels are affecting our climate negatively and there is a limited amount of them in the world, which leads to the importance of finding alternative fuels. One alternative is biogas, which is produced though a digestion process of different organic materials in a biogasreactor. Organic substrate that comes from farms has the biggest potential to increase the production of biogas in Sweden. Primarily crops from farms, but also waste products like manure are of great importance.Today there is a calculated theoretical potential for biogasproduction of 14TWh per year, which is around ten times larger than Sweden?s production today.

The aim of my thesis was to do a Life Cycle Assessment (LCA) of an average thread tap that is manufactured by Dormer Tools AB, and to create a practical model that the company can use in order to study other thread taps from an environmental perspective.The method of LCA is used to investigate the environmental effects of a product during its life cycle. This is a gate-to-grave analysis with focus on steel and thread tap manufacturing, coating procedure, use, waste management and transports. Three common coating types were compared separately. Steel manufacturing answers for the highest energy and raw material consumption under the life cycle of the thread tap. Its emissions contribute to global warming, acidification and eutrophication above others.

At Sandvik Materials Technology, Argon gas is used as furnace atmosphere when heattreating hot rolled wire. Upon heating chromium steel wire, a rich oxidelayer forms on the wire surface. The abstract of this masters thesis is to enhance the understanding of the constitution of the oxidelayers and the influence of the furnace atmosphere. This will be achieved by performing a number of annealing experiments on laboratory level. Also, the aim is to understand the chemical reactions and physical mecanisms controlling the pickling process.

This project was conducted on behalf of the organization SABO (Swedish Association of Public Housing Companies). The aim of this project was to investigate which relevant environmental aspects and indicators there are for housing companies to present in their sustainability report. The project consists of three main goals: to decide if there is a need for common guidelines when conducting a sustainability report, determine appropriate environmental indicators and to create a simple model of how the companies can present them. This was done by a literature study, analysis of 13 sustainability reports and interviews with seven housing companies. The result of the project suggests that there is a need for common guidelines to, among other things, make it easier to make a comparison with other companies.

Detta examensarbete utreder möjligheten av att bygga ett studentboende med fokus på de tillgänglighetskrav som finns enligt Svensk standard samt specifika materials miljöpåverkan.Byggbranschen har en stor negativ påverkan på miljön när det gäller energianvändning.Arbetet avser att utforma ett förslag i form av ett mer miljömedvetet studentboende samtidigt som det ska vara attraktivt.För att alla lägenheterna ska vara tillgängliga för personer med funktionsförhinder har normal tillgänglighetsnivå använts..

This thesis, designed as a case study, is about complications concerning conservation of a decorative oil paint on lime plaster from the drawing-room in Mostorp castle sited in the county of Halland in south-west of Sweden. The building was built 1878-80 with an exterior of granite. The interior walls were made of clay bricks, lime mortar and lime plaster. The oil paint is applied to a layer of putty. The combination of different materials, which are organic and inorganic, affects the movement caused by internal and external stress.

The aim with my work is to get a deeper knowledge about the preschool's views of environmental work. I also want to examine how the preschool teachers along with the children work with the project Green Flag in the preschool. I have used structured interview with two teachers in a preschool that works with Green Flag. Green Flag is an environment certification and is an evidence on that one works daily with a document aimed environmental work along with the children. I have found out that each year they work with different themes within Green Flag.

This report describes the work with creating a CMS (Content Manager System). A CMS is a web tool so you easy can publish materials on your web page. With a CM Scan you can without any knowledge of programming web pages create and maintain a web page. This will result in that you and your organisation save time and money. You can also split the responsibility for the webpage in different roles, but still keep the control.

Att eleverna i skolan ska utvecklas och nå de mål och kunskapskrav som finns skrivna i läroplanen är en central del i skolvärlden. Men hur når man då dessa på bästa sätt? Hur ska man som lärare veta vilken undervisning som är bäst för sina elever? I läroplanen står att eleverna ska ges en varierad undervisning där eleverna själva ska få gestalta, prova och utforska (Lgr11). Syftet med denna litteraturstudie är att undersöka om laborativa arbetsätt i matematik är gynnsamt för eleverna. I studien framställs att arbeta laborativt kan vara gynnsamt men till en viss del och att det beror på en del olika faktorer, som exempelvis lärarens roll och hur väl uppgiften och materialet framträder varandra..